The computer can t get into the WINDOS 10

You format the C drive and reinstall the system.

This sentence means that your first boot item is booted from the optical drive, but there is no disc in the optical drive, so you are asked to insert the system disk and press enter. Under normal circumstances, the system should automatically transfer the second boot item you set in the BIOS (usually the second boot item is the hard disk). The situation here should be a problem with your hard drive or a problem with the BIOS settings.

You can change the BIOS settings of your computer and change the first boot item to hard disk boot. For specific operations, you can go to the Internet to search for BIOS settings, which will be introduced. Then restarting the machine should solve the problem, if the problem is not solved, it may be that your hard drive interface is loose or there is a problem with the hard drive.

No hard drive found or no system on the hard drive press enter to continue! This issue occurs. There are several scenarios:

1.The hard drive cable or the hard drive itself is damaged. It needs to be replaced (you can take it to a normal machine to try) Turn on the computer and press del to enter the CMOS The first item inside looks at the IDE device and recognizes the hard disk.

2.Memory issues (detaching memory.) Use an eraser to erase the gold finger or change the memory plug to try it) 3.Dust killer (please clean up the main unit)!

If the system cannot be installed, it may be that you have not set the C disk as an active disk.

Once you rule out this problem, it means that your hard drive has a bad sector condition or a boot error.

It is recommended to send it to the merchant for testing.

Boot - press F8 - Repair Computer - System Recovery Options - System Boot Repair - Restart the computer The specific operation is as follows:

1.Restart your computer and press the F8 key to enter the advanced security options of the system.

2.Click on the "System Recovery" option.

3.Click "System Recovery" to confirm, and then you can enter the system boot repair.

4.Restart the computer, and the problem that win7 won't start can be solved.

Hello, this is the system software is missing.

You can use the one-click backup and restore tool that comes with your computer to restore the operation, but before restoring, it is best to back up your data to prevent data loss. You can use the system disk boot disk or U disk boot disk to enter the PE system, back up the data, and then restore the operation or directly reinstall the system.

Press appears at startup, Ctrl+Ait+. But after pressing these 3 keys to restart, the same situation still appears, how to solve it?

1. Can pass the self-test, that is, hear a crisp "tick" sound, and then the blue screen and other situations cannot log in to Windows. This situation is generally caused by system damage, driver or hardware conflicts, viruses, etc., and is relatively simple to solve

1. During the boot process, select "Last correct configuration boot". If it cannot be resolved, proceed to the next step;

2. During the startup process, pay attention to press the "F8" key to enter the safe mode, in this mode, uninstall and reinstall the belt by importing the backed up registry, antivirus, and viewing the hardware device manager. ".

3. It is worth mentioning that a malfunctioning keyboard or not plugging it in well will also cause a blue screen and the appearance of "keyboard

errororno

keaboard

present"If there is no problem with the keyboard and motherboard sockets, clean the keyboard connector and plug it in again.

4. The boot is normal without display, check whether the power cord, switch, and data cable of the display are correct, or it is possible that the display is damaged, which can be easily troubled by observing the host situation and starting sound.

5. Reinstall the system. There's no denying that this is one of the ultimate means of solving software problems and is a must-have for DIY players.

It is not possible to enter the system, not even the safe mode, and the reason is:

1. Viral infection;

2. The system boot file is corrupted;

If it is a virus infection, it cannot be solved by reinstalling the system, you need to use software to completely disinfect the virus, or format the hard disk, and then install the system and graphics card driver.

Have you changed anything recently, such as drivers, or installed any software?

1. Restart the computer, press F8, and the selection menu will appear.

2. Select the last correct configuration, try the safe mode, if you can enter the safe mode, you can uninstall the recently installed software or driver.

3. If this is still the case, you can only redo the system.

As soon as the machine is turned on, press F11 continuously

How to solve the problem that the computer can't enter the system.

It is possible that the system files are corrupted and need to be installed again.

Format the main hard drive and reinstall it.

There is a problem with your computer hardware, the motherboard self-test can't be done, the machine can't start, unplug the memory, it's installed in it, it's OK for a long time.

Is it solved?,My computer too,Can't get into the system,Just out of that windows standard finished black screen restart,Reinstall the system with floppy disk pass also,Out of the windows standard also restart,Use the startup tool,The tool menu is good,Hard disk tool detects that,You can go in is win8pe to restart when you go in,Anyway,As long as you go into the system,Whether it's PE or Microsoft's official image,Restart when you go in。

The causes of blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. Workaround:

1. The cause of the virus. Use PC Manager to disinfect the virus.

2. Reasons for memory. Use an eraser to wipe the gold finger of the memory module and wipe off the oxide layer to ensure that the memory module is installed and running normally.

3. The chassis is not clean. The CPU fan has too much dust to run normally, causing the CPU temperature to be too high, so use a brush or hair dryer to clean up the dust on the inner wall of the case, the CPU fan, the graphics card fan, and the motherboard.

Hello answer, I am your Xiaoming senior sister is happy to serve you, your question I have received, I will reply to you in time after reading, after asking, because there are too many lists, I will answer in turn, I will not not answer, please be patient!

Dear, hello, I have sent you the answer to the question, I hope you can be satisfied, I really hope we can help you, I am happy to help you, I hope our answer can help you, I wish you a happy life! A good man has a safe life! Thank you

How to solve the problem that the computer can't enter the system.

1. If you can't enter the system, restart the computer and press the F8 key to try to enter the safe mode.

2. If you can enter the safe mode, click Start - All Programs - Accessories - Run, enter in "Run", open "Services", first close the service of Windows Update, and set it to "Disabled".

4. If the safe mode cannot be entered, consider reinstalling the system.