Why does the light on my console keep flashing and the console is loud Thanks in advance

Is it hot when you touch the top of the computer? If the heat is a precursor to the power supply being burned out, the burning smell may come from the power supply, and whether the hard disk burns or not, I haven't seen it and don't dare to say nonsense.

The light on the host has been flashing because there is a program reading or writing the disk, reading the disk and writing the disk for no reason, it may be caused by a virus, it is recommended to check the next 360 check the bad comment plug-in, check the epidemic virus.

If the red light on the host is flashing, it should be the hard disk reading and writing, there are many reasons, viruses, running large software, ** files, etc., it is possible, but it is very abnormal if there is a mushy smell, check the fan in the chassis, and the next hardware detection tool to see if the temperature of the hard disk and CPU is normal, the hard disk should be around 40 degrees, and the CPU should not exceed 70 degrees.

If the red light flashes, it should be a little insufficient memory, the host is loud, it's a fan problem, and the compatibility is not very easy to estimate.

That's generally not a big deal.

But you have to check out the box.

Primary checks. The capacitance of the main board! Circuits.

Wait a minute. If you don't feel good.

Just find someone who knows how to do it.

If you don't know how to do it, go to the computer city. Good luck.

According to your situation, it should be the abnormal rotation of the fan in the host, the fan may be CPU, or it may be the graphics card, the fan does not run well and causes poor heat dissipation, there is a risk of burning, disassemble the host to clean up the dust, and add lubricating oil to the fan. That light should be the status light of the hard disk, and it will be on when the hard disk is working.

How you are able to operate normally, the normal is the capacitor on the motherboard.

The red light on the main computer case has been flashing is caused by the failure of the computer's system key location file, it will use a breathing light to prompt you that the computer has an error, here you can carry out the system reinstallation method to solve, the specific steps are as follows:

2.Select the system. The old friend installer has recommended the system version suitable for your computer configuration, and users can also choose XP, win7 or win10; No action is required, click "Next".

3.**System. ** The last step of the user-selected system, reinstalling the system. At this point, the user can leave the computer, and the program will be fully automatically reinstalled, in order to prevent failure, and at the same time, you can also go to "make a boot USB flash drive".

4.Restart the installation automatically, then wait, and the system will automatically install.

The red light on the computer's main chassis kept flashing and flashing. 1. The red light on the computer host is generally the signal indicator of the hard disk reading data;

2. The computer hard disk reads the data and the indicator light flashes at the same time, the more frequent the flashing, the more frequent the hard disk reads the data;

3. The host flashes red light, which is generally due to the frequent exchange of data between the CPU, memory and hard disk. If the memory is too small, the CPU's ability to process data is weak, or the amount of data to be read from the hard disk is large, it will cause the red light to flash wildly.

Extended information: The red light flashes to indicate that the hard disk data is being read, this is normal during the boot process, and it will also flash in a certain program, if it is a large program such as a running game, it will also flash for a long time, or it will be lit directly, don't worry, as long as the power is not accidentally cut off during the red light flashing process, it will not cause any damage to the hard disk, and it belongs to the normal use category.

The memory on the motherboard is often called a memory module (green bar) and is the part of the computer that stores and exchanges data. This is because the CPU needs to exchange data with external memory (such as hard disks, floppy disks, and optical discs) when working, but the speed of external memory is much lower than the speed of the CPU.

Therefore, it is necessary to have a device with a fast working speed, in which the work of temporary storage and exchange of data is completed, which is the main role of memory. The most common color of memory is to transmit data to the hard disk and the CPU, the red light on the computer host is the working indicator of the hard disk, under normal circumstances, the red light keeps flashing, the hard disk is working normally, and if it does not flash, it means that the hard disk is busy, and if it does not flash, the hard disk is not working or the hard disk is broken. If the red light of the computer host flashes relatively quickly, it is because the hard disk is reading and writing frequently, and the memory may be too small, in this case, you can increase the memory.

In addition, you can also turn off System Restore, although System Restore can save important files and settings on the computer well, but it increases the background read and write tasks of the hard disk, and turning off System Restore can improve the performance of the computer.

This is the hard disk working indicator, under normal circumstances, as long as the hard disk has read and write operations, it will flash; If this light stays on, the drive is working at full capacity.

PS: In addition, if the hard drive is damaged, it is also possible that this light is always on.