Is there a flying car, three sprays, QQ three sprays

The starting fire is an essential technology for the car to quickly accelerate and start to apply. At the time of the countdown. The moment 1 is about to jump to 0, press , and you can start with a firefight.

2. Starting swing head: After starting the fire, press the , and button repeatedly in turn, which can increase the speed of the vehicle. When running in a straight line, using this technique can also be a few yards faster than not shaking your head.

2. Drift: 1. Single drift and optimized drift: a complete drift step into the bend is (turn right as an example):

1) Shift** to the brake) (2) Pull the front straight) (3) Release and press quickly Spitfire to end drift The purpose of drifting in the speed race is to gather nitrogen in the corner to form acceleration, and the speed will be reduced in the process, in order to greatly reduce the speed loss, there is such a professional term "optimized drift" in the running world, the basic concept is to turn the head of the car before turning, and then drift, and the time to shift is as short as possible in the case of matching the corner. Accumulate more nitrogen at a rate that is least consumed. (1) Steering) (2) Shift (brake drift) (3) Pull the front of the car straightened) (4) Release Quickly press Spitfire to end drift 4. Double spray 1. Ordinary double spray: (1) Optimize drift prelude) (2) Shift (brake drift) (3) Pull the front of the car straight, and use step 4 at the moment when the tire print is about to end) (4) Shift (here can be loosened or not, it is recommended to keep, so that you can maintain the speed of double spraying) (5) Release +shift, and quickly press to form the first spray (6) Release , quickly press to form a second spray 2, link double spray:

The front of the car turns fast, and the 2 sprays are connected (6-7 steps) tightly, which seems to be a long single spray) (1) 2) shift (3) 4) +shift (5) (6) (7) 5. Continuous spraying D-type continuous spraying: (1) 2) shift (3) 4) +shift (5) release +shift quickly press to form the first spray (6) Repeat 4-5 steps to achieve the number of sprays you need (7) The last spray ends the whole continuous spray C type continuous spray: (the characteristic is that the connection of 2 consecutive sprays is closer to D type) (1) 2) shift (3) 4) +shift (5) Release step 4 and quickly press (6) 7) Repeat 4, 5, 6.

6. Broken drift: (that is, use reverse drift instead of the commonly used pull-back head, usually suitable for small-angle drift and straight drift) Turn right as an example: (1) shift (2) shift (3) Release step 2 and press single spray seven light float:

Used for subtle steering and when nitrous is almost at full acceleration) while moving forward and tapping +shift

Yes, but it's time-consuming and inconvenient.

First even drift, with wisdom and then double spray.

Double spray (pei yu answer double float) difficulty.

I don't know how many times this skill has been called by people.,The name has been changed back and forth.,In fact, it's two fire-breathing.,In essence, it's two drifts and then two fire-breathing.,The first time is a normal drift.,The second time is a small drift (that's the drift key tapped),Then the fire-breathing (with the arrow keys,Adjust the direction),Then the fire-breathing (you can also have the arrow keys,Generally just spray it directly),This skill is a nightmare for beginners.,Because many people can't press the second fire.,The reason is that the second drift is not pressed and the first one is sprayed. ,This point should be ruined.,When you're a beginner.,You can press slowly.,Don't be too impatient.。

Spray. Difficulty.

This skill is the most practical skill right now.

There are two main points in continuous spraying, the first spray speed should be fast, and the second is that the more you stick to the interior wall when drifting, the better. Let's talk about the second point first, if you want to stick to the inner wall, you must first learn the optimal drift, and the first drift of even spraying is very critical, which determines the future position, (of course, if your level is very high, you can adjust it through the small flutter later). Getting back to the point, if you want to be fast, the first thing to remember is that the small flutter should be shorter (but not the point drift key), and the second is to let the Spitfire play to the extreme, and then the small flutter after spraying, sometimes these things are difficult to explain clearly, and the teaching of the online spray ** is too slow, so it is recommended that you run to the master to watch him press the buttons better, as long as you are willing to work hard, it is no problem.

If others spray three or four times in a row, you spray four times (ignore other situations), indicating that your speed is not fast enough.

Personally, three sprays are not of much use and hunger.

Maybe it's because the technology doesn't come home.

But I also know a little bit of skill.

Here's how it is.

Start with a big flutter, and notice that the black line is quickly drifting once (twice) to get the first float when it is almost finished.

Speed sprays into the line of the second drift.

That's it. Float quickly and let off steam.

The style is +shift+shift

The second floats quickly! I spew out the air that floated for the first time).

SHIF (the third floats and squirts out the air of the second).

shift (the 4th float, the 3rd breath is squirted).

Figure it out for yourself.

It's not easy to practice

One. Optimize drift.

2.+shift (shift tap, the shorter the time) 3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

The 1-3 step connection must be fast).

Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (Two-key tap, the shorter the time.)

Second Drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The two drifting wheel prints should not be connected, and the interval between the two drifting wheel prints should not be too large) three. Spray.

1.+shift (optimized drift).

2.back direction).

3.+shift (Two-key tap, the shorter the time.)

4.+ Immediately return to the direction and breathe fire).

5.→+shift

.Repeat 3 or 4 steps.

Finally (continuous spraying is the continuation of double spraying, double spraying repeatedly).

Four. Double spray.

1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (three-key tap, the shorter the time) [second drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).

Note: 1-3 steps"↑"It's always pressed.

Five. link spray.

1.+shift (optimized drift).

2.back direction).

3.+shift (three-button tap, the shorter the time) 4+ Immediately return to the direction and breathe fire).

5.↑+shift

Landlord, do you know that the double spray? Before that, I'm spraying nitrogen.

3 sprays. One. Optimize drift.

2.+shift (Shift-tap, the shorter the time.)

3.After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

The 1-3 step connection must be fast).

Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (Two-key tap, the shorter the time.)

Second Drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The wheel prints that drift twice like hail cannot be connected, and the interval between the two drifting wheel prints should not be too large) three fibers. Spray.

1.+shift (optimized drift).

2.back direction).

3.+shift (Two-key tap, the shorter the time.)

4.+ Immediately return to the direction and breathe fire).

5.→+shift

Repeat 3 or 4 steps.

Finally (continuous spraying is the continuation of double spraying, double spraying repeatedly).

Four. Double spray.

1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (Three-key tap, the shorter the time.)

Second Drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).

Note: 1-3 steps"↑"It's always pressed.

Five. link spray.

1.+shift (optimized drift).

2.back direction).

3.+shift (Three-key tap, the shorter the time.)

4.+ Immediately return to the direction and breathe fire).

5.↑+shift

Repeat 3 or 4 steps.

Finally, I wish you a great time, thank you!

Finish! If you are satisfied, give me 5 stars slag bridge Oh, thank you, o(o

2.+shift (Shift-tap, the shorter the time.)

3.After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

The 1-3 step connection must be fast).

Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (Two-key tap, the shorter the time.)

Second Drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The wheel prints of the two drifts cannot be connected, and the interval between the wheel prints of the two drifts should not be too large) TOP1 is purely entertainment new.

If you don't understand, please ask questions 1-on-1.

QQ Speed Icon Lighting Rules:

As soon as you reach level 12 in the game, accumulate 1800 Cool Coins, and complete Mission 2 (experience accumulation to level 12), the icon will automatically light up instantly.

Three. Spray. 1.+shift (Optimize Drift)2back direction).

3.+shift (Two-key tap, the shorter the time.)

4.+ Immediately return to the direction and breathe fire).

5.→+shift

Repeat 3 or 4 steps.

Finally (continuous spraying is the continuation of double spraying, double spraying repeatedly).

Four. Double spray.

1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (Three-key tap, the shorter the time.)

Second Drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).

Note: 1-3 steps"↑"It's always pressed.

Five. link spray.

1.+shift (optimized drift).

2.back direction).

3.+shift (Three-key tap, the shorter the time.)

4.+ Immediately return to the direction and breathe fire).

5.↑+shift

Repeat 3 or 4 steps.

1, S + square forward (press at the same time) (S is short press).

2, forward opposite side (the advance of the first and second parts is the same advance, and the advance can not be released until the end of 2, simply put, it is an ordinary drift but does not breathe fire).

3, release the forward immediately after the end of the drift of 2, and then press the s+ square immediately (it must be fast, not too early and not too late, the 3rd part can not press forward, press it and fail).

4. The opposite side is pressed forward at the same time (at this time, the front of the car is straightened).

5, let go of the forward, and then press the forward square s (press at the same time, the second drift is very short almost nothing, but you can also spray fire, this is the characteristics of PP continuous spray, the scratch marks after the second spray fire are small to almost none, so do not press the opposite direction directly spray the third fire, if it is very slow, it is too big).

6. Forward (Spitfire).

Praise rate of essence knowledge: 73%.

QQ Speed Perfect Drift Method (QQ Speed is different from running kart, don't press Shift for a long time when drifting, it should be short so that the drift will be smoother).

This is a society to cherish and dedicate itself to copying, otherwise it will be reported! Thank you for your cooperation) to optimize the drift: shift (shift must be very light) pull back to the head) (jet) even.

Drift: shift (into the drift) shift (where is the first drift and shift is the second drift) breaks.

Bits: Shift +Shift (Shift at the end of the first drift) (Jet) Double.

Spray: Shift (optimize drift) Pull back the head (no spray, because the first drift can be sprayed once, but not here) +shift (enter the second drift immediately after the first drift, note: the drift here can not be pointed) Due to the first drift, here is the first drift of the spray, and it is the head of the cart) (the second drift of the spray) Even.

Spray: Shift (optimized drift) Pull back the head of the car (do not spray, because the first drift can be sprayed once, but can not be sprayed here) +shift (enter the second drift immediately after the first drift, note: the drift here can not be pointed) Because of the first drift, here is the first drift of the spray, and it is the head of the car) +shift + repeat these two steps is the continuous spray) The order indicated by the + sign, if there is no + sign, it is to be pressed together.