-
Anonymous users2024-02-10R0 in global configuration mode Enter ip router1 In global configuration mode enter ip routeIP route
R2 enters IP Route in global configuration mode
-
Anonymous users2024-02-09The router(config) IP route rule is: destination network, subnet mask, next-hop IP address (that is, gateway, egress, and interface name is OK).
All network segments need to be configured, and those directly connected do not need to be configured.
For example, r0: IP route
This means that all the packets that arrive are sent by the interface.
-
Anonymous users2024-02-08Summary. Hello dear, according to your problem description router, configure the static route operation method as follows. 1. In the case of no static route configured, the computer in this network segment cannot access the server in the corporate network (.
2. After configuring the internal static route, the PC will send data that is not in the same network segment as itself to the gateway, that is, wireless router B. Once Router B receives the data, it checks the destination address of the packet. If a packet with the destination IP address is found, the router will send an ICMP redirect packet to the PC to inform the PC that all subsequent packets sent to the network segment can be sent to Router A.
This allows the PC to directly access the company's intranet server. 3. Detailed configuration: first log in to the management interface of the FW150R router, then click "Routing Function" - "Route Table" - and then click the "Add New Entry" button on the right.
Enter the static route information and return to the static route table to view the static route entries you just added. 4. After the configuration is completed, the computers in the network segment of the company's intranet can access the server in the intranet segment.
The router is configured with static routes.
Hello dear, according to your problem description router, configure the static route operation method as follows. 1. In the case of no static route configured, the computer in this network segment cannot access the server in the corporate network (. 2. After configuring the internal static route, the PC will send data that is not in the same network segment as itself to the gateway, that is, wireless router B.
Once Router B receives the data, it checks the destination address of the packet. If a packet with the destination IP address is found, the router will send an ICMP redirect packet to the PC to inform the PC that all subsequent packets sent to the network segment can be sent to Router A. This allows the PC to directly access the company's intranet server.
3. Detailed configuration: first log in to the management interface of the FW150R router, then click "Routing Function" - "Route Table" - and then click the "Add New Entry" button on the right. Enter the static route information and return to the static route table to view the static route entries you just added.
4. After the configuration is completed, the computers in the network segment of the company's intranet can access the server in the intranet segment.
Final question. Thank you.
Kiss, I can't see your ** clearly.
Didn't understand what you said above. Teach you a simple way. When sending packets from R0 to R4, you can flush all from R0 to R3 with a default route. >>>More
2. In the list of clients --- DHCP server, you can get the MAC addresses of all computers 3. Turn on MAC address filtering in the security settings, only allow the MAC addresses that have been enabled in the MAC address list to access the Internet, and then fill in the MAC address in the MAC address filtering, remark clearly that it is the MAC address of the computer, and choose to take effect, so that only the computers with these MAC addresses can access the Internet after setting 4. In the DHCP server - static address allocation, assign IP to each MAC address, such as: A1 is set to, A2 is set to, A3 is set to, A4 is set to 5, IP traffic allocation, set to and to ** traffic and uploaded traffic are set to 1, the other 4 IP traffic you want to set as much as you want to do It is best to get a router that can flash tomato dualwan tomato dual wan firmware, which is more user-friendly.
There is no need to set up, but the incoming cable Please plug in any port of 1234, do not plug in the normal port, because your network environment is LAN!
Summary. Hello dear and happy to answer for you. Hello dear, setting the IP to static is not effective in preventing others from rubbing the network The only problem with setting a static IP address is that it will work on all WiFi, so you can only use this method to solve the problem if the user is only connected to one WiFi. >>>More
Automatically select the Internet access method. Choose again.