How about the effect of the plow discharger installed in the inclined section

How about a plow discharger? This question cannot be generalized and should be analyzed according to your specific situation. Here is a brief introduction to the characteristics of the plow discharger for your reference.

The plough discharger further overcomes the deficiencies of all the old dischargers, due to the improvement of the front and rear double plowshares, locking device, flashlight dual-purpose and mechanical self-locking three different structures of installation, so it is the most advanced unloading coal distribution machinery in China at present. 1. The plough head is divided into the front ploughshare made of alloy high chromium or asbestos material and the rear plough of wear-resistant rubber plate, so that the discharge is cleaner. 2. The locking device of the ploughshare is a mechanical grabbing type, which can adjust the height of the coulter, and is close to the belt with a good surface, and the coulter will not be due to the coal when working

Hit force and lift or Acenaphthenic Ao Gang choking, drive part is currently the country....

Electric plough discharger is a new type of discharger, which can be equipped with various types and bandwidth belt conveyors as a multi-point discharge device, with four types of discharge, right side, left side and eccentric, which are widely used in electric power, metallurgy, coal and other industries. Structural features 1. The electric plow discharger adopts the main and auxiliary combined plowshares, the moldboard is made of wear-resistant cast iron, the head is shaped at a small angle, and the arc shape is in the tail, the moldboard can be more close to the rubber surface, and the discharge is more smooth and clean. 2. The ploughshare can be adjusted up and down, and the angle can also be adjusted by the tie rod, which can be adjusted according to the needs when using.

3. The whole machine has high strength and no jitter. 4. The electric plough discharger is suitable for material particle size 0 200mm, belt speed seconds Electro-hydraulic plough discharger (Aopu plough plow) is widely used in mining, metallurgy, electric yards, coal yards, container stations, port terminals and other conveyors for sectional unloading. The hydraulic plow discharger is a mechanical product installed on the middle frame of the belt conveyor to perform unloading and control the flow and direction of material conveying, and can evenly and continuously unload the conveyed materials into the hopper or the place where it is needed.

Plough lifting shouting discharger is a kind of unloading and coal distribution machinery, which has the advantages of absolute self-locking blocking, no internal and external leakage, great overload and noisy balance ability, and stable operation.

The plough discharger further overcomes the deficiencies of all the old dischargers, due to the improvement of the front and rear double plowshares, locking device, flashlight dual-purpose and mechanical self-locking three different structures of installation, so it is the most advanced unloading coal distribution machinery in China at present.

1. The ploughshare part is divided into the front ploughshare made of alloy high chromium or asbestos material and the rear ploughshare of wear-resistant rubber plate, which makes the unloading cleaner.

2, the ploughshare increased locking device for mechanical grabbing type, adjustable coulter height, close to the belt with the best surface, the coulter will not be lifted or shaken due to the coal during work, to avoid the belt is torn, worn and coal leakage.

3. The driving part is the latest domestic product flashlight dual-purpose mechanical electro-hydraulic push rod. It overcomes the defects of the electric actuator such as poor overload capacity, easy to burn the motor, stuck, top bending screw, etc., and new drawbacks such as internal and external leakage, non-self-locking, sliding, and crawling of ordinary electro-hydraulic actuator. The dual-purpose mechanical electro-hydraulic actuator has the advantages of absolute self-locking, no internal and external leakage, great overload capacity, and stable operation.

4. The installation method is divided into A, B, and C three kinds, and the electro-hydraulic push rod can be placed on the upper part of the coal separator, vertically installed, and installed on both sides of the belt, which is very convenient for customers.

5. The flap of the gas lock is made of high manganese chromium wear-resistant materials, which prolongs the service life by 20 years and reduces the amount of maintenance.

6. The use of the air-locking part: (1) Make the material evenly distributed to prevent deviation and sticky material and scattering along the way. (2) Reduce the induced blast and make it decelerate to less than 10% of the original.

3) It is suitable for conveying sticky materials, wet materials, large materials, and powder materials to prevent sticking.

(1) According to the unloading position of the equipment: unilateral and double-sided;

2) Equipment installation form: left and right;

3) Push rod installation form: side push rod and upper push rod;

4) According to the power form: electric, pneumatic and electro-hydraulic push rod;

Jiangsu and Shandong have many manufacturers of various agricultural machinery such as plow dischargers.

The electro-hydraulic plough unloader takes the electro-hydraulic push rod as the power source, and when working, the push rod is stretched out to act on the drive rod to drive the frame forward, complete the fall of the coulter, and support the flat roller group, so that the working surface of the belt is straight, and the lower edge of the coulter is closely attached to the belt surface, and the materials on the running belt are unloaded into the funnel (hopper), or unloaded to the required place. When the unloading is completed, the starting push rod retracts and acts on the driving rod, driving the frame to retreat, the coulter is lifted, and the variable groove angle idler group changes from flat shape back to groove shape, so that the belt working face returns to the groove state, and the material passes smoothly; Since the electro-hydraulic actuator is hydraulically driven, it has automatic overload protection performance. When the operation is blocked, the pressure in the oil circuit increases to the set limit, and the overflow device overflows quickly and accurately, and overload protection is implemented.

The motor runs within the rated value and will not burn out.