What should I do if I can t find the document that I used to put on the C drive after installing gho

Updated on technology 2024-05-23
13 answers
  1. Anonymous users2024-02-11

    It seems that there is more luck than luck!

    The files on your C drive, after being restored by your ghost, will cover the original files, even if the gods can't save them.

    You can find it online: EasyRecovery to recover your files, but don't get your hopes up. Don't continue to write any files to your C drive until it is restored, so that you can try your best to save as many as possible (100% seems impossible, but how much can be saved).

    I have used the software introduced to you, it is quite good, the main thing is that your files are not overwritten, you can recover them. But if it is covered, there is no hope at all.

    Of course, if your files are extremely valuable, it is recommended that you take your computer to your local data recovery center, they have more advanced methods to recover your files, but the fee is more expensive, less than hundreds, more than thousands. You can find out about it locally :)

  2. Anonymous users2024-02-10

    Don't use easyrecovery for data recovery, Chinese documents will almost become garbled.

    If you use ghost, if you are interrupted in the middle of the process, there is still a chance to use this kind of software to retrieve the file, and if it is done, there is almost no chance. However, if the value of the data is really high, you can consider trying your luck at a data recovery center such as Feike Data, where the fee is calculated on a kb basis, don't think about binary files, if it is a document, you can try it.

    Computer Enthusiast Maniac

  3. Anonymous users2024-02-09

    You should have backed it up in advance, my documents, favorites, etc., admit bad luck brother, the gods can't save you. Don't do it again after learning your lesson.

  4. Anonymous users2024-02-08

    This is because when you reinstall XP with ghost, all the contents of the C drive are covered, and there are a large number of system configuration files in the C drive, such as the win7 option at the time of boot is in the configuration file of the C drive, after reinstalling with ghost, this file has been overwritten and deleted! Of course, you can't see the option of win7,But as long as the D disk is not moved,Win7 inside has not been deleted,Then the win7 system you said is still intact in the D drive。

    The solution is, right-click on my computer, select Properties in the pop-up menu to open, find Advanced Click, find the "Settings" button in the startup recovery item, click it to enter, and then click "" to add the startup item of win7 in the appearer! (Note that only the last line can be added, and the original content is forbidden to be modified).

    For details, please refer to it.

    Software tool repair.

    If you can't solve it, as long as you want, you can also reinstall win7 in the d drive, so the system will automatically create a win7 boot selection menu for you.

  5. Anonymous users2024-02-07

    Don't talk about the superfluous, let's take a look at the latest solution of the Huajun software station. Address.

  6. Anonymous users2024-02-06

    Of course, as soon as you recover, you will overwrite the boot startup item. Look at the launch of the XP and still can't find it.

  7. Anonymous users2024-02-05

    Reinstall it, or win+r, enter msconfig, start and see, see if there is an option for win7.

  8. Anonymous users2024-02-04

    Enter "drive letter: ghost..."Confirm that you will be able to open this folder.

  9. Anonymous users2024-02-03

    This is a folder created in a special way under XP, first make sure that your system is still XP, and there are no other systems such as Vista or Win7 installed, and then click "Start" - Run", type: x: ghost ...

    There is a space in front of the note, and you can enter.

    If you want to delete, just under the DOS window, type rd x: ghost .Just press Enter.

  10. Anonymous users2024-02-02

    Could it be that your computer is poisoned?

  11. Anonymous users2024-02-01

    Reason analysis:ghost to not the first partition,So the main boot should not have changed (this is a personal guess,Please correct if there is a mistake),So the boot menu is still under the original C drive。 And ghost obviously won't change the files under the C drive.,So there's no XP boot item.。

    Solution:1If you want to automatically update the boot when you install the system, you should install it with the official image instead of ghost, and you should install XP first, and then win8.

    2.However, the system has been installed, there is no need to be so troublesome, the next bootice, easybcd or other boot repair software, you can manually add XP entries. You can refer to the relevant tutorials for specific operations!

    Digression: Dual systems and multiple systems do not mean that the stability is reduced, but it is possible to mismanipulate the files of other system disks. And some bootloaders can hide certain partitions when booting up, so it has little to no effect!

    If you can also learn some knowledge about boot bootstrapping, even more"Down-to-earth"Finish!

  12. Anonymous users2024-01-31

    Hello! The problem does not explain the details of the unsuccessful installation of win7, here are the possible causes and solutions:

    1. Since the XP system has been installed, the problem of incompatibility of hard disk mode should be ruled out.

    2、D disk is not processed in advance,It often leads to unsuccessful installation of the GHOST system,Please format the D disk before installation。

    3. If you have any problems with the ghost program version or image file, please use a higher version of ghost (if necessary, take the manual method) or replace the gho image file to install it.

    4. Drive D is not converted to main partition and booted with boot repair tool. Since the Win7 system is installed on the D drive, and when installed with Ghost, the system boot file cannot be written to the C disk of the active partition of the hard disk, even if the image file is imported into the D drive, it cannot be booted from the D drive, and the later installation work is completed. So convert the D drive to the main partition and repair it with the startup repair tool.

    5. The machine itself does not support the installation of the G version system, please replace the original system installation, which is also the best way to install the dual system.

  13. Anonymous users2024-01-30

    ghost system.

    , if you accidentally clone the whole disk, the data of the D, E, and F disks will also disappear.

    It is estimated that you are caused by a GHSOT misoperation.

    Ghost is easy to misoperate, and it is easy to mess up the hard drive into a partition. The ghsot partition is lost and only remains.

    C disk. It is estimated that you have made an error in the manual ghost step, resulting in the loss of the partition and only the C disk silver file remains.

    Manual ghost

    Install the system. Correct steps: local—patrition—from

    image, if we select this when restoring the system: local-disk-from

    Just guess the orange is what we need to do now is to back up the previous hard drive.

    Image file. *.gho) to the entire hard drive, obviously, the result of such a choice is simply to take a backup image of a partition that was originally backed up.

    File recovery. to the entire hard drive. As a result, the previous partition is lost and only a C drive is left, and it is better not to write data indiscriminately if you need to recover the data. If it helps you, I hope you don't pay attention to it.

Related questions
15 answers2024-05-23

C: Windows is not a system process.

Consider the registry file for virus residues. >>>More

15 answers2024-05-23

When Du Yuesheng was separated from his sister, he was still young and did not have much memory of his sister, and the information provided by those who searched for his sister was too little and had no obvious characteristics, so it was difficult to find.

17 answers2024-05-23

You don't need to use this question.

Solution:1Find it in the installation path. >>>More

19 answers2024-05-23

Take the disk partition tool as an example to introduce the specific solution, select Run in the startup item to enter the welcome interface, and click Enter; >>>More

13 answers2024-05-23

The street is full of job announcements, how can you not find a job, you are lazy, and you want pie in the sky.