What is the signal coming out of the set top box?

It is collectively referred to as a digital set-top box composed of digital permutations.

WIF signal or radiated signal, which do you say?

I don't know how, but I know that there is a place called "znds" smart TV forum, and there is a corresponding box section in it, as long as your box is not too unpopular. Users are the best fans of TV, and there is the most real feedback in it, and they have all encountered this problem you have encountered, and there are more professional responses. You can search for it.

I know that there is still no such specialized TV ** professional.

If you want to find the signal source on the TV, you can find it in the settings,First turn on the TV,Use the TV remote control to find the settings,Enter the settings page,Find the general settings; There will be a lot of options after entering the general settings of the light tremor, find the boot and start the infiltration button to mess around, here is the signal source option, select the signal source to turn on the signal source. After the cluster file is set, return to the home page, and then turn the TV back on and off to automatically enter the set-top box signal source.

The signal source of LCD TV is generally switched according to the signal type input to the TV, and the switching method is as follows: 1. If the TV is connected to the cable TV signal line**cable TV program, you should use the remote control, press the source key, and switch the signal source of the TV to TV mode, so as to be normal**.

3. If the TV is connected to a digital TV set-top box or a *** machine and other equipment, you should use the remote control, press the source key, and switch the signal source of the TV to **mode or HDMI mode, S terminal mode, etc., in order to be normal**.

1. The set-top box model is different, and the display status of the signal light is also different, so it is recommended to check the instruction manual of the set-top box to understand.

2. For example, the Huawei EC6108 set-top box has a power lamp, a network signal light, and a remote control signal light, and the power and network signal lights are solid green in the normal operation state of the set-top box, as follows:

a) Power Lights:

1. Connect the power supply, and when the power switch is not turned on, the power light will be off.

2. When the power is on and the power switch is on, the power light is green.

3. Use the remote control to turn off the set-top box, and the power light is red.

b) Network Signal Light:

1. The green light is always on under normal networking.

2. The red light is always on, which is generally caused by the network not being connected

1) The network cable of the set-top box is not plugged in.

2) The set-top box PPPOE dial-up is not connected normally.

3) Remote control signal light: Use the remote control to operate, the set-top box will flash green light when receiving the remote control signal.

Hello. You need to provide a specific** to answer for you, and you can also check the instructions for the use of the set-top box.