The question of the set top box and the computer accessing the Internet at the same time is urgently

You're using a DM500.

Is your route set up correctly? The computer does not require dial-up to access the Internet, right?

If the computer does not need to dial up to access the Internet, it means that your routing is set correctly. Then you need to change the IP address in the DM500, or change the router and the IP address of the computer to the same IP segment as your set-top box. You'll have to give more detailed data on the situation.

Know > Computer Network > Internet > Internet Help Add to the Collection to Pending Solution.

The question of the set-top box and the computer accessing the Internet at the same time is urgently answered

Bounty Points: 50 - 14 days and 23 hours until the end of the question.

Here's the rough picture. I'm Netcom's broadband.

I use the router to separate 2 lines, one to connect to the computer and the other to the set-top box, but now the computer can access the Internet, but the set-top box can't be seen.

How can it be realized, the computer can also be seen at the same time as the set-top box is connected to the Internet.

PS: Originally, it was directly connected to the computer from the LAN port of the set-top box, so that it could be connected at the same time, but now the computer and the set-top box are separated, and I want to realize it through the router.

Are network*** and set-top boxes the same thing?

Asked by: randy379 - Assistant Level 2 I'll get: You can get 2 points, and you will get bounty points and 20 points if you need ** to explain the content, you can upload **.

A total of 1.

Is there anything you understand. Hurry

The set-top box and the computer are connected to the Internet at the same time, which needs to be achieved with the help of a router.

How to install the router. First, plug the network cable from the modem into the WAN port of the router, and then use a network cable to connect to the computer from any remaining network cable interface. Secondly, enter the router settings according to the IP address on the router manual, and set up the router through the setup wizard.

After setting up the router, you can directly use wireless or wired to connect the set-top box and the computer, and as long as the router is unpowered, you can surf the Internet at the same time.

You need a router with ITV, with four computer network input interfaces, a network TV interface, connect ITV to the set-top box input interface with a data cable, as long as the router is not powered on, you can access the Internet and watch TV!!

You may not be able to do this at the terminal, the operator controls the MAC of your modem, they can designate a port as IPTV and one of them as the Internet, the only thing you can do is to clone a Mac in the same cell that uses both ITV and broadband modem, but that thing is not a computer, it is difficult to do.

You directly ask Unicom to give you a signal, if you only have a broadband account, it is impossible to use the same.

To sum up: the set-top box has nothing to do with your networking. For wireless networking, this is another problem.

The set-top box can only be used when the TV is turned on,If the signal of the wireless routing allows the TV to connect to the network,It must be set up。 There is an easier way, use a national wifi on the computer at home, it can also quickly create a signal out, so that other computers, TVs, mobile phones can receive this signal.

Once your router is connected to your computer, plug it in.

Then enter the admin account and password admin, which will be written on the router.

Click Setup Wizard.

ADSL Virtual Dialing.

Then enter the wifi account and password you want to surf the Internet.

7.Click Next.

8.Then the network parameters, WAN settings, are used to connect automatically.

9.Restart your router and your router will be able to access the Internet.

When you buy it, the manufacturer has a manual, if you don't have it, you can ask it, some of them are set up directly, you can use it by plugging in the network cable, and if it is a wifi set-top box, you have to set it up again.

Is it a set-top box to access the Internet or to use the set-top box as a hotspot to support computer Internet access?

If you want to use the Internet in a set-top box, connect it directly to the router at home or connect the network cable directly, and then set up the network.

If you want the set-top box to be used as an AP hotspot, first of all, the set-top box must have this function, and the second is to connect the network cable, find the hotspot in the network settings, set the network and password, and other mobile phones and laptops can access the Internet through the set-top box.

What parameters, what interfaces? You have to tell this to know what to do. Let's take a later interface**.

Yes, but it is recommended that the set-top box connect the network cable to the ITV port of the optical modem, **TV.

If the line is outsourced with pipes, you can pull a few network cables through the existing lines and connect them to each room from the cat, and you will not be able to let the electrician help operate.

If you can't operate, you can put the wireless router next to the optical modem, the wireless router is connected to the optical modem to set up automatic dialing, the computer in each room is wirelessly connected to the router to access the Internet, and the desktop computer can also buy a wireless network card to connect to the wireless router to access the Internet.

2m Unicom**Online Internet,Want to buy a network set-top boxSome people say**Online Internet and network set-top box are not a frequency, so they do not affect each other,Some say that you can't watch TV when you go online。

OK! There are two kinds of holes in the back of my wireless router cat, and the manual also says that it can!

Digital TV set-top box is one of the information appliances, it is a kind of consumer electronic products that can allow users to carry out interactive digital entertainment, education and commercialization activities on the existing analog TV, digital TV programs.

The basic function of the digital set-top box is to receive digital TV broadcast programs, and at the same time it has all the functions of broadcasting and interactive multi-application such as:

1) Electronic Program Guide (EPG). Provide users with an easy-to-use, user-friendly interface, and a way to quickly access the programs they want to watch, through which users can see one or more channels or even all channels of TV programs that will be watched in the near future;

2) High-speed data broadcasting. It can provide users with various messages such as ****, ticket information, electronic newspapers, and hot news;

3) Software upgrades. Software upgrades can be seen as one of the applications of data broadcasting. The data broadcasting server broadcasts the upgrade software according to the DVB data broadcasting standard, and the set-top box can identify the version number of the software, receive the software when the version is different, and update the software saved in the memory;

4) Internet access and e-mail. Digital set-top boxes provide easy access to the Internet via a built-in cable modem. Users can surf the Internet and send emails through the built-in browser of the set-top box.

At the same time, the set-top box can also provide a variety of interfaces to connect with the PC, and connect with the Internet with the PC;

5) Conditional Acceptance. The core of conditional reception is scrambling and encryption, and digital set-top boxes should have descrambling and decryption functions. In short, up to now, a variety of value-added services have been developed around the three core functions of digital set-top box: digital, digital information and interactive applications.

The inside of the set-top box is networked, and users cannot update, so they can only wait for their official website to update.

Network set-top box (STB technology) is a vital technical equipment in information appliances. The function of the set-top box has jumped from a multi-frequency tuner and decoder to a control terminal for a large number of online databases of movies, events, news, etc. At present, network set-top boxes can be divided into three categories, one is the network set-top box that focuses on shopping, the other is the network set-top box that is aimed at young people, and the other is a TV box designed only for parents.

Therefore, how to expand the function of the set-top box, improve the quality, reduce the production cost, and optimize the product structure is of great significance to the development of the upcoming interactive TV network.

The movie content connected to the set-top box is provided by the content provider that the set-top box cooperates with, and you can update and synchronize the content by updating it, but if you don't have this function, you have to wait for it to push the update.

Manual updates are typically achieved using a flashing system, or by changing providers.

This is determined by the server, and you can't change it.

It depends on what set-top box you are, and some can't be synchronized with the computer.

You buy a router yourself, divide one to the network TV, one to connect to the computer, and a few can use anything!

I remember having encountered this problem, but I only know it for Android! Just open the settings to go to Wireless & Network and then WLAN sharing!

Computer broadband can only be the main line, and then ** and others can use the split line! If the broadband is a breakout network, it will not work!

No, because it can only help with TV, it is not possible to access the Internet.

No, unless you go to activate the Internet feature.