What should I do if the winding head switch is not in the starting position?

Barmag winder maintenance procedures.

1. General procedures for the maintenance and operation of the winding head:

1. Maintenance personnel must wear relevant labor protection equipment;

2. In the state of complete shutdown, the main interface of power supply and air source can be unplugged before repair and maintenance; 3.Special disassembly tools should be used in the process of installation and disassembly;

4. Thoroughly check whether the anti-electric safety device is in good condition, and do a good job of safety measures, do not disassemble any protective device or safety device in the machine casually;

5. Before disassembling the pressurized parts, the pressure source must be disassembled;

6. When working in the danger zone, be vigilant at all times, and do not enter the work area for unrelated personnel.

2. Maintenance and overhaul procedures for the replacement winding head:

1.Dismantling & Cleaning:

a.The surface hair, dust, and oil stains should be wiped clean, and the flying hair and debris in each dead corner should be blown clean with compressed air; b.When disassembling the machine, the removed baffle, protective cover, screws and other parts are classified and placed neatly, and they shall not be placed at will, and no less than one screw shall be installed when assembling; c.

Clean the pressure rollers, chucks, push cylinders, and fork winding;

d.The electrical instrument cleans the electrical cabinet, motor, and sensor, and replaces the motor filter. 2.Check the adjustment work:

a.Chuck rotation, loose cylinder, stumber wear, coupling wear, air leakage bFriction roller rotation and surface defects.

c.Air pipe joints, check valves, and throttle valves have air leakage and looseness dWhether the pusher device is flexible and in place.

e.Whether the action sequence of each pneumatic device is normal and in place, and whether the delay time is correct fCheck the wear of the fork belt and the roller belt and check the belt tension g

Fork and waveform plate position (ABCD value) hWhether the gripper is flexible and the position is correct.

i.Whether the parts and sturdy screws are loose and loose, and whether there is desoldering at the joints JCheck the parallelism of the pressure roller to the chuck.

k.The electrical instrument checks the insulation of the electrical part, the wear of the cable, and the loosening of the terminal lThe electrometer checks that the sensor is in the correct position.

m.Whether the motor is running normally and whether the turntable brake is normal 3Maintenance work:

a.Each guide post and guide rail are clean and lubricated.

b.After the wire cylinder is cleaned, apply TOP2000 grease CThe reassembled cylinder and 0-ring should be lubricated accordingly.

1.Check the solenoid valve for damage in the spool 2Check the working condition of the cylinder.

I'm using 360. Generally, if this happens, it's antivirus.、360 safe if it doesn't work.、Ahem.。。 If it still doesn't work, restore it with one click...

It would be nice to fix it with Kingsoft NetShield.

Other questions can also be compared in the two forums, the idea forum.

Think Forum:

Hope it helps, thank you.

You can set the system to switch input methods at the same time when switching back and forth between different applications.

First, enter "Change Keyboard" in the search box of the Start menu, and then in the search list that appears automatically, click the "Change Keyboard or Other Input Methods" option to open the "Keyboard and Language" tab of the "Region and Language" dialog box; Then click the Change Keyboard button in the tab to open the General tab of the Text Services and Input Language dialog box. Then click the drop-down arrow under "Default Input Language" and select your commonly used input method (such as "QQ Wubi Input Method"); Finally, click the "Apply" and "OK" buttons respectively.

After the above steps, when we switch back and forth between multiple applications, the Chinese input method that we often use will not automatically switch to the English input method. Therefore, you can directly perform the input operation of Chinese characters.

Let me explain to you the purpose of these 3 sets of shortcut keys.

Ctrl+Space: Switch between input method and non-input method, non-input method refers to the Chinese Simplified American keyboard, which can only type letters.

Ctrl+Shift: Switch between Chinese input methods in your computer, such as Sogou input method and smart ABC input method.

shift+alt: Switch between Chinese input method and foreign language input method, such as Sogou input method and Japanese input method.

You can right-click on the language bar, Settings, Key Settings or Advanced Key Settings (because you don't know your XP or Win7), click "Switch between different languages", click "Change Key Order", Win7 tick "Enable Key Order". Select Alt+Shift on the left and Ctrl+Shift on the right.

Delete the input method and reinstall it, and set the toggle key.

imeshow-setup

This is an input method repair tool.

You can try.

In some dynamic moments, or when talking.

Hello, first of all, make sure that your hand is steady.

If the colors do not match, you can adjust the color and brightness contrast.

As shown in the figure below: If you want to change the face on the right to the face on the left, it is obvious that the color difference between the two is very large, so the specific adjustment method is:

1. Image - Adjust - Color Balance, as shown below:

2. Add yellow and red, so that the colors of the two are basically similar.

3. Image - Adjust - Brightness Contrast, as shown in the following figure:

4. Increase the brightness and reduce the contrast appropriately, so that the color difference between the two is smaller.

5. Align the person's face and erase the edges, which basically meets the requirements of face changing, as shown in the following figure:

6. Precautions: The adjustment method of color balance is suitable for beginners, if you are more proficient in adjusting the curve, then, the adjustment method is simpler and the effect will be better, as shown in the following figure:

Let's take a look at the start menu of Windows 10 first, click on the user's avatar, and you don't see the menu item to switch users, so you can't quickly switch users.

On the Windows 10 desktop, right-click on an empty space in the taskbar, and then click on the Task Manager menu item in the pop-up menu.

In the Task Manager window that opens, click the file Run New Task menu item.

Enter the command in the run window that opens, and then click the OK button to run the command.

In the Local Group Policyr window that opens, click the Computer Configuration Administrative Templates system menu item.

In the new window that opens on the right, right-click the entry point setting item that hides the quick user switch, and click the menu item in the pop-up menu.

In the window that opens, select Disable an item, and finally click the OK button.

At this time, click the start button, click the user's avatar in the pop-up menu, and the menu item of switching users will appear.

This is very normal, and I don't have a Chinese version.

The main reason is that you only have one account, and the adminstrator account is closed.

You right-click on the desktop for this PC, administrative, local users and groups.

Find adminstrator, right-click on Properties, and uncheck the Disabled account.

Or the phone has been crushed or dropped and the front camera is not in good contact. You can try to press the position of the front camera with your hand or gently tap it in the opposite direction, if the camera is not in good contact, it may be improved. The most direct way is to go to a phone repair shop to disassemble the camera and reinstall it.

If the camera is damaged, you have to replace it with a new one.

The front camera of the mobile phone is not working, so go to the mobile phone store to repair it.

Is it all black when you open it? If it's you, disassemble the phone and press the camera, it is estimated that the contact is poor. Or maybe it's just a matter of setting. You don't know.

Let's get it to the repair point

When the front camera of your phone won't turn on, it is recommended that you:

1.Switch the camera mode to auto mode and then try to switch the front camera.

2.Whether there are other apps using the front-facing camera.

3.Open Camera - Gear - Reset.

4.Try uninstalling the third-party camera software on your phone to troubleshoot software compatibility issues.

5.If it doesn't work, back up the data in the machine (contacts, text messages, **, etc.) and try to restore the factory settings.

If the problem persists, please bring the purchase invoice, repair card and machine to the Samsung service center for professional after-sales engineers to help test.

Method 1: You should check whether the input method indicator in the lower right corner of the taskbar is still there

Step 2: If not, see if this input method icon has become active and stopped somewhere else:

Step 3: You can press alt+shift to try,(Sometimes installing or uninstalling other input methods will cause such a problem).

If it doesn't work, try pressing the Ctrl+Space (space) key again, which is to switch the Chinese and English input methods (sometimes the system is unstable or you have done system optimization and repair and other operations will cause such problems).

Method 2: If the above method does not work, it may be that the input method management process is dead. Press Ctrl+shfit+del to open the task manager, find the process, and click "End Process" in the lower right corner

After the process is finished, click the File menu in Task Manager, select the New Task command, enter " in the pop-up text input box, and click the OK button

If the above methods don't work, restart your computer. ‍

Method 3: If the above two methods don't work, try to revert to the default press Ctrl+Shift toggle, or to display the input method icon on the taskbar.

Step 1: Open the Control Panel and double-click on the "Region or Language Options" icon in it

Step 2: Click on "Language", switch to the "Language" tab, and click on the "Details" button

Step 3: In the "Settings" tab of the dialog box that opens, click "Advanced" and uncheck the box before "Turn off Advanced Text Service".

Step 4: Switch back to the "Settings" tab, click the "Language Bar" button below, and tick the checkbox inside

Step 5: Click the "Key Settings" button, select "Press CPAS LOOK" in the pop-up dialog box, and click the "Change Key Order" button below.

Step 6: In the pop-up "Change Key Order" dialog box, you can check the box of "Enable Key Order" (you can also modify the shortcut key for language switching on your computer).

After entering the game, I want to chat with my teammates and can't switch the input method.,The following operations can solve the problem:

1. Click the Enter key first.

2. Click the Ctrl key.

3. Click the spacebar.

4. Finally, switch the input method (switching the input method means that the shift key + Ctrl key is pressed at the same time).

The best solution for the input method cannot be switched First, right-click on the input method icon on the taskbar and select "Settings". Then select "Key Settings", double-click the first "Switch between different input languages" and first tick "Switch Input Language" under select the left-handed alt. Uncheck the right before "Switch Keyboard Layout".

Then go to "Chinese (Simplified) Input Method - Input Method Non-input Method Switch", and uncheck the box before "Enable Key Order". Roll out the settings after you've decided all the way. Go to the settings again, go to "Switch between different input languages", and tick the one on the right.

Exit when you're OK. It perfectly solves the problem that you can't use Ctrl+Shift and Ctrl+Space to switch input methods.

If there is a setting in the computer or anti-virus software, set the most commonly used input method as the first input method.

Start --- setup --- Control Panel - Regional Language.

--- options

Language Tags - Details --- Advanced Tags--- untick the box before "Turn off advanced language options".

Your input method chart is back.

In the Settings tab, you can adjust the switching method of the input method in the key setting --- change the key order.

Ctrl+Space is to switch with your most recent input method.

crtl+shift is to switch with your input method, if you want him to have a new icon.

You'll have to boot it up to let him run the file automatically, which is in the system32 directory under the system directory.

Of course, you can also enter this file directly in the run (under XP).

That's of course.,A lot of games have blocked the input method.,There's only English to play.,Because I'm afraid of affecting the control of the game.,So it's normal.,You tell me the name of your game.,I don't think it's OK.。

Will it be windowed?

1,The window can be held up to see the language bar,2,After the left mouse clicks on the language bar,Select what you want,3,Go down and then hold the window back to its original position。

Use the shortcut key of the switch input method, the default is ctrl+shif, you can also set the shortcut to switch by yourself!