Why is the laser cutting machine so slow when cutting thick plates?

Perhaps in the perception of many customers, it is thought that cutting a millimeter thick material uses a speed of 20, which can use a speed of 10 for cutting 2 millimeters of material, and then cutting 4 thick materials can use a speed of 5, and cutting 8 thick materials can use a speed of 2.5.

Laser cutting machine.

In fact, this is a wrong understanding, when we are processing, the speed will not be proportional to the thickness of the material, if the thickness of the material, its corresponding speed will be lower, just like the car we drive, the speed of its travel will not change with the angle of the degree of its speed, if the angle of the degree is larger, the slower its speed will be, we are using a laser cutting machine to cut thick plates as well?

Of course, if you want to change one of its processing speeds, you can choose high power to cut, and the speed of thick materials will be correspondingly faster.

The reason for this depends on what material you mainly cut the thick plate.

If it is stainless steel, it cannot be cut with oxygen. The energy used for cutting is all provided by the laser, and the power of the industrial laser is generally at the kilowatt level, and the energy at this level is too low, so the cutting speed is not high.

If it is a carbon steel plate, it can be cut with oxygen combustion, and 70% of the energy used for cutting is made of oxygen**, so that the cutting speed is naturally fast.

You can consult Huagong Laser Farrilai in combination with your actual cutting needs, they are a leading enterprise in the laser cutting industry, and have accumulated a lot of experience in cutting technology, I have them, you can consult 027-87180275

Because the quasi-steady-state combustion process is more difficult to maintain. It is difficult to maintain constant oxygen purity and pressure in the direction of plate thickness. It takes a long time to cut thick plates, and the cutting edge is not ideal when it comes to thick plates. Buying a laser cutting machine from Bose Light Laser will give you a lot of improvement.

Jinan Microcarving Laser is a modern enterprise integrating R&D, production and sales of optical, mechanical and electrical integrated high-tech equipment. It mainly produces laser engraving and cutting machines, laser engraving machines, marking machines, computer cutting plotters, laser engraving machines, laser cutting machines, laser engraving machines, mechanical engraving machines, CNC engraving machines, advertising engraving machines, woodworking engraving machines, small engraving machines, stone engraving machines, laser cutting machines, ultra-large format laser cutting machines, laser marking machines, laser cutting machines, filter cloth laser cutting machines, acrylic laser cutting machines, cloth laser cutting machines, laser plate making machines, laser engraving machines, laser engraving machines.

That's for sure! It's faster with optical fiber! And you turn up the power soon!

This question is very simple, the laser itself is a thin plate, if you want to ask a little more carefully, then ask the manufacturer of laser cutting equipment, Guoye CNC is a good brand.

Generally speaking, there are several aspects that need to be considered, the first is the cutting material, and the other is the cutting power, which is now a common laser cutting machine on the market.

The power ranges from 1000W-15000W, and some have 20000W and 40000W, like 1000W equipment can cut carbon steel up to 12mm, 6000W equipment can cut carbon steel up to 25mm; The 15000w equipment can cut carbon steel up to 50mm thick, of course, the cutting gas, the speed and accuracy of cutting are also different.

The principle of the laser cutting machine is mainly used to transfer the sheets.

Laser processing machines that cut workpieces into the desired shape. Utilize laser beams.

The thermal energy of the equipment for the realization of cutting. Laser cutting is to melt and evaporate the workpiece when the laser beam is irradiated to the surface of the workpiece, so as to achieve the purpose of cutting and engraving, with high precision, fast cutting, not limited to the limitation of cutting patterns, automatic nesting to save materials, smooth incision, low processing cost and other characteristics, will gradually improve or replace the traditional cutting process equipment. Ourui Laser has the answer for you.

The laser cutting machine can cut iron plate 16mm, steel 6mm, aluminum 6mm

The laser cutting machine can cut about 8 mm.

The reason why the cut surface is not smooth by laser cutting is nothing more than the following points:

1. Laser cutting machine.

A laser beam is generated.

There is a certain degree of deviation in the position, resulting in the laser cutting, the workpiece is not completely cut, resulting in the cut surface is not smooth enough, adjust the beam position of the laser cutting machine, and cut again.

2. The speed of laser cutting is too slow, resulting in the destruction of the quality of the surface of the workpiece, resulting in an unsmooth section, adjust the speed of laser cutting, so as to reach a certain value, so that there will be no more unsmooth section.

3. The purity of the auxiliary gas of the laser cutter is not high enough, resulting in an unsmooth cut surface, and the gas with higher purity is replaced.

w Fiber laser cutting machine cutting maximum thickness of different materials: carbon steel maximum thickness 6mm; The maximum thickness of stainless steel is 3mm; The maximum thickness of aluminum plate is 2mm; The maximum thickness of copper plate is 2mm;

w fiber laser cutting machine cutting machine different materials cutting maximum thickness: carbon steel maximum thickness 10mm; The maximum thickness of stainless steel is 5mm; The maximum thickness of aluminum plate is 3mm; The maximum thickness of copper plate is 3mm;

w Fiber laser cutting machine cutting maximum thickness of different materials: the maximum thickness of carbon steel 16mm; The maximum thickness of stainless steel is 8mm; The maximum thickness of aluminum plate is 5mm; The maximum thickness of copper plate is 5mm;

w Fiber laser cutting machine cutting different materials cutting maximum thickness: carbon steel maximum thickness 20mm; The maximum thickness of stainless steel is 10mm; The maximum thickness of aluminum plate is 8mm; The maximum thickness of copper plate is 8mm;

4500w laser cutting stainless steel is up to 20mm, but the quality of the cutting surface above 12mm is not guaranteed, and the cutting surface below 12mm is definitely a bright cut. The cutting power of 6000w will be better, but the price point is also higher.

It depends on what material you are cutting, different materials have different hardness, and the thickness of what can be cut is also different.

There is a close correlation between the cutting speed of the laser cutter and the thickness of the plate. Generally speaking, the thinner the plate thickness, the faster the cutting speed of the laser cutting machine. Of course, the speed of cutting speed is also related to factors such as laser power, beam focus, and operation mode.

For materials with thin plate thickness, the cutting speed of the laser cutting machine can reach a relatively high level, which is also one of the advantages of laser cutting technology. As the thickness of the plate increases, the cutting speed slows down accordingly. Some thicker materials may require a longer cutting process to complete.

Therefore, when the laser cutting machine cuts thick plates, it needs to set the corresponding parameters and operation modes to ensure accuracy and quality.

However, it should be noted that the cutting speed of the laser cutting machine is not only affected by the thickness of the plate, but also by various factors such as the type of material, the power of the laser, the quality of the beam, the type of cutting head, and the cutting conditions. Therefore, in actual operation, it is necessary to adjust the corresponding parameters and control the operation according to the specific material and cutting requirements to obtain the best cutting effect.

In general, there is a certain negative correlation between the cutting speed of the laser cutting machine and the thickness of the plate. Through reasonable adjustment of parameters and operation control, efficient and accurate cutting of different materials and plate thicknesses can be realized, and the demand for high-precision cutting in industrial production can be met. <>

In the process of cutting sheet metal of the laser cutting machine, the size of the cutting family late mouth will affect the cutting quality and efficiency. Generally speaking, in the case of thin plates, the larger the cutting nozzle, the higher the cutting quality and efficiency. This is because:

1.The larger the cutting nozzle, the greater the oxygen flow, so that the oxides produced during cutting are discharged faster and are not easy to accumulate in the incision, thereby reducing the problems such as burrs and slag during cutting, and improving the quality of the cut. 2.

The larger the cutting grip, the greater the airflow during cutting, which can dissipate the heat around the incision faster, reducing the heat-affected area, thus making the cutting speed faster and improving the cutting efficiency of the cutting effect. However, in the case of thicker plates, an excessively large cutting nozzle can lead to a decrease in the quality of the cut, as excessive oxygen flow may cause the oxides produced during cutting to not be completely discharged, increasing the generation of dross and burrs. Therefore, when using a laser cutting machine, you need to choose the appropriate cutting nozzle size according to the thickness of the sheet to get the best cutting effect.