What does the application of enterprise network cabling mean in enterprise network

Since the two places have been connected, file transfer is not a problem, as for fax, you can buy a fax software, a fax machine, you can divide more than ten or twenty internal numbers! It's very practical, as long as the network is unblocked, it's no problem.

In terms of file transfer, as long as it is shared through the network, it is OK under internal ** communication.

If there is anything you don't understand, I'll tell you again.

Even ERP can not be used for network failure, so the network is very important, and it must be maintained and monitored at all times, so there is no need to worry about faxing, but you can also have a fax in each place, and you can prepare it with both hands, as for the LAN you can't see all the machines, you can pass.

Start -- Run -- Address).

to access.

This kind of access to the XP system needs to turn on the guest user in the user and turn off the Windows firewall, for this kind of enterprise LAN it is recommended to use the same user name, which is convenient for LAN resource sharing.

As for the LAN structure and wiring diagram you mentioned, it was necessary to plan out the wiring at that time, and if it was contracted by the network company, it was necessary to ask them, which is very important for future maintenance and management.

We are the company that does network cabling.

I'll give you a table of contents.

Some of what we do can't give you.

It is a non-disclosure agreement. Directory. Pick.

Be .........abstract………1

Former. Words .........

Chapter I. Network system .........5

Requirements analysis. Application functional analysis .........

Several important indicators of network performance .........

The overall objective .........9

Chapter II. Network system design .........

Network design principles .........11

Exchange technology .........12

Layer 2 switching technology .........

VLAN technology .........

LAN bottlenecks .........

Layer 3 switching technology .........

The choice of backbone network technology .........23

Hierarchical network structure design .........24

The core layer of the network is designed .........24

The design of the network aggregation layer .........24

The network access layer design .........

Chapter III. The overall solution of the campus network that can be realized .........

Total solution.

Teaching area solution .........29

Dormitory solutions .........30

Network management solutions .........31

The program features .........32 knots. Bundle.

.........References .........

Summary. The integrated wiring system is a set of network cabling system specially designed to meet the development needs. 1. For modern buildings, the integrated wiring system is like the nerves in the body, using a series of high-quality standard materials, in a modular combination, the voice, data, image and part of the control signal system are integrated with a unified transmission medium.

2. After unified planning and design, integrated in a set of standard wiring system, the overall system of modern buildings is organically connected, and the system integration of modern buildings provides a physical medium.

The integrated wiring system is a set of network cabling system specially designed to meet the development needs. 1. For the modern quiet search building, the integrated wiring system is like the nerve in the body, using a series of high-quality standard materials, in a modular combination of voice, data, image and part of the control of the signal system with a unified transmission medium for synthesis. 2. After unified planning and design, integrated in a set of standard wiring system, the overall system of modern buildings is organically connected to provide a physical medium for the system integration of modern buildings.

What is a network cabling system? The application of the integrated wiring system 3, the integrated wiring system is the infrastructure of the digital information system for the construction of the intelligent office, and it is the structural sensitive wiring system that will unify the planning and design of all voice bridge bureaus, data and other systems, so as to provide the office with an information-based and intelligent material medium, and support comprehensive applications such as voice, data, and multi-technology.

The application objects of the integrated wiring system are banks, exchanges, hotels, restaurants, shops and other business fields, office buildings such as major companies, centers, and comprehensive office buildings, university campuses, major company building groups, and other building groups, various transportation fields, hospitals, emergency centers and other health and health fields, senior residences, intelligent communities and other residential fields.

The application scope of the integrated wiring system: because the integrated wiring system is mainly designed for the layout of computers, communication equipment and automation equipment inside the building and between the building groups, the application scope of the network wiring system is to meet the requirements of all kinds of impure blocking computers, communication equipment and equipment, and building automation equipment to transmit weak current signals.

Four main features of integrated wiring:

Building Automation (BA) includes Fire Protection Automation (FA).

Communications Automation (CA).

Office Automation (OA) (including Information Management Automation (MA)).

Cabling integration.

The relationship between integrated wiring and intelligent buildings.

The integrated wiring system is like a highway in the intelligent building, we can connect the 3A cables in the civil construction stage, the integrated wiring building, to the inner building to install or add what system, we can completely according to the time and needs, development and possible to Yu Ming decide. The integrated cabling (Paiyin PDS) is only a part of the smart building, and the integrated cabling system cannot be regarded as a smart building. As long as there is"Highways"There we are"Generic wiring system", what do you want to run"car"If you want to get into any system, it becomes very simple.

The initial investment in the cabling system is only 3-5% of the building.

The concept of integrated wiring.

The Cabling System is a standard structured cabling system for voice, data, imaging and other information technologies. The integrated wiring system is the transmission network within the building or building complex, which can connect voice and data communication equipment, switching equipment and other information management systems to each other, including all cables and related wiring components between the building to the external network or the connection point on the ** office line and the voice or data terminal in the work area.

The structure of the integrated wiring.

Modular design and layered star topology are adopted. The widely used building and building complex combined wiring system (PDS) structure can be divided into 6 independent systems (modules):

1.Work area subsystem

It consists of a connection (flexible wire) from the terminal device to the information socket.

2.Horizontal subsystem

Connect the cables from the floor patch panel to the information sockets on each user's work area, usually on the same floor.

3.Riser backbone subsystem

Connect the main distribution with the patch panel system on each floor.

4.Management subsystem

Connect the vertical trunk cables with the horizontal wiring subsystem on each floor.

5.Machine-room subsystem.

Connect various public equipment (such as computer hosts, digital program-controlled switches, various control systems, network interconnection equipment) with the main distribution frame.

Integrated wiring design scheme.

1.Design the structure diagram.

2.Design examples.

3.Considerations:

Try to meet the communication requirements of users, understand the communication environment between buildings and buildings, determine the appropriate communication network topology, select the medium to be used based on openness, and try to be compatible with most manufacturers' products and equipment.

My suggestion:

1. The front desk and reception area can use wireless network, this place needs to be beautiful, the use of wireless, reduce the wiring, but also to meet the temporary customers and conference room temporary use of the network.

2. Other departments can use switches to connect each department according to the telecommunications scheme. It can be distributed from the wall 20 mm above the ground, and the line groove can be installed, which is not ugly.

Your network structure is similar to that of my company.

The 1 you envision is okay.

However, for management purposes, it is best to purchase a manageable switch, and then manage the two switches in trunk mode in a unified manner. If the internal environment is not very demanding on management, buy a fool's one.

Buy a wireless router with high power, large coverage area, and preferably a manageable fat AP. Of course, the cheap skinny AP you said can also meet your requirements, but the management is nothing.

Most of the cables are still amp or Langke.

Behind the switch, whether manageable or unmanageable, can transfer data to each other, you just need to set it up.

1, the connection method is no problem, yes, it will not affect the network speed of those 20 computers 2, there is no need for this.

4. You can choose wireless routing, but it is better to change the antenna with a stronger signal, but it is a bit dangerous to cover 400 square meters, because you are a company, there must be a wall in the middle, it is recommended to cover with 2 wireless APs.

5, 5 types of line choose 400-500 a box of price, the brand does not need to be considered, because there are too many brands, you have to care about the diameter of the core, whether it is not, skin and workmanship.

6. Yes, as long as it is in the same LAN, not only in the same switch, if you don't understand, please add questions, and wish you a happy Mid-Autumn Festival.