The laptop can t open when reading CDs

Reading CD is the computer's optical drive, it is one of the most delicate parts of the computer, one of the shortest service life, it is recommended that you do not use it often, if you use it every day to watch discs or listen to CD**, it will be scrapped in less than a year and a half. Replacing a laptop's optical drive with one ** is not cheap.

Right-click on the optical drive in "My Computer" and select "Eject". Or you can pop it open by poking a needle in the small hole next to its indicator light.

If both methods still don't work, it will be sent for repair.

Never force it to pull away by yourself to avoid further damage.

There is a small hole next to the optical drive button, and it pops out when you poke it with a needle or something. As for why it can't be bounced, it's hard to say, sometimes it's good to restart, or maybe it's broken, send it to the repair station.

You can open "My Computer", right-click on the optical drive icon, select Eject, if the optical drive is good, it should be able to eject, if not, it means that there is a problem with your optical drive, to repair or replace,

When using a laptop**cd, I encountered that the notebook could not put a CD, how to solve the problem? The following is the relevant information I have compiled for you about laptops**can't cd, I hope it will help you!

When we use laptops, there will be some faults in the optical drive of laptops in many cases, and more failures are put into the disc without response, there are many reasons for the spine in this kind of situation, many people ask questions in knowing, but the basic is not very comprehensive, I would like to explain it to you here.

The first type of optical drive problem is like this, for example, after you put your disc into the optical drive, the optical drive can recognize your disc, but as long as you click ** and play, it will fail or crash, which means that the laser head of your laptop has reduced the ability to read the disk, and this situation needs to be repaired by the laptop.

The second situation is also a more common phenomenon, that is, for example, after you put the disc in, the response is very slow, and sometimes there is no response, which is likely because the laser head of your laptop is too dirty, wipe it with a thick cloth, and be sure to wipe it gently when wiping to prevent scratching the laser head.

The third kind of frequent fault is that when you use the disc, it will make a loud sound as soon as you enter the optical drive, or there is a very harsh sound, at this time it should be a problem with the quality of the disc, especially the kind of super disk burning, you can try to change a disc to try, and it will generally be used normally.

The best kind of situation is that there is no response after you put in the disc, and you can't read the disk, this is the biggest reason is estimated to be the virus in the file of the system, because the virus has damaged the system settings of the laptop, resulting in this auspicious phenomenon, you can reinstall your laptop system to normal.

1.What is the matter with the *** of the disc installed on my computer console and it can't be opened after pressing the open button.

Hello! We're glad to answer your questions! Please follow my ideas and methods to solve the difficulties. Thank you!

1. Please prepare a paper clip (straightened), or a large pin, or a large sewing needle. Looking at the disc drive panel, there must be a small hole.

2. Put the straight needle just prepared, * This small hole, slightly top or pound, you can open the disc compartment door some, and pull it out if it is insufficient.

3. This method does not require electricity, so even if you turn off the computer and forget that the disc is in the optical drive, you don't need to turn it on again. Just do it and save trouble.

4. The optical drive warehouse door that is opened at the top of the top needs to be manually pulled to the end or pushed to the end, pay attention to the gentle slow and accurate movements, don't do it wrongly.

5. Once you push or pull to the end, you can restore the electric switch door by pressing the switch. Pull or push flat, don't go up or down or push or press.

6. It is an emergency practice to smash the emergency withdrawal hole. Don't follow the example of a good optical drive, there is already a faulty optical drive, this method is suitable but does not cure the root cause.

7. The cause of the failure is that the gear disc is loose and there is a gap or foreign body blockage, the key teeth are worn, the rubber band is loose and slippery, or the motor is deflected.

8. It is recommended to ask someone to repair it, and it does not cost much to get a small fault. But if you eliminate the optical drive with this, it's not worth it, and if you don't want to repair it, use the above methods.

9. The rubber band is easy to change, the gear disc is not difficult to find, and the waste repair machine shop can be dismantled and repaired for you. It depends on the patience of the master and the availability of spare parts.

2.As soon as the computer puts the disc on, it won't turn on.

1. Set the optical drive to start.

Reboot, press Del to enter the BIOS, find the Advanced BIOS Features and press Enter to enter the Advanced BIOS Features interface.

Find First Boot Device, turn the page with PGUP or PGDN to change HDD-O to CDROM (Optical Drive Boot), press ESC, press F10, press Y, press Enter, save and exit.

2. Put it into the CD.

1. Put the disc into the optical drive, restart, 2. Use the keyboard arrow keys to select "Install XP system to the first partition of the hard disk", and press Enter.

3. Enter the copy installation interface, the following is automatic, don't move anything, if you don't want to install some drivers, you can manually select the process roughly: display the copy progress, restart, automatic installation driver, XP installer, please wait (take a long time, wait patiently), the last task is being executed, automatic restart, and enter the desktop after displaying "Welcome".

4. Manually set the monitor resolution and refresh rate.

Open the hardware manager, see if the optical drive driver is damaged or disabled, if it doesn't work and try other discs, it should be that the optical drive is broken, and you can only change the optical drive.

Since you can enter the system normally, it means that there should be no problem with the partition, and it should be that the disk cannot be opened normally due to a virus.

Unable to open hard drive workaround:

Right-click to open one of the infected drive letters, under the toolbar - Folder Options - View, select Show all files and folders, and remove the check box before hiding protected system files, you will find that there is one more file under the drive letter, open it to see the following content:

autorun]

open=This sentence means that when you double-click the drive letter, the virus program file written to the registry will be automatically opened, and even if the virus is killed, the registry information will still exist, which is why the drive letter cannot be opened.

Start -- Enter regedit to open the registry program in run, ctrl+f to open the find command, enter, click to find, and then this key will be found in the registry. Generally, under the hkey current user software Microsoft Windows CurrentVersion Explorer Mountpoints, click Delete.

Start--Run--Enter regedit to find [hkey classes root drive shell] to delete all under the shell, then close the registry, press keyboard f5 to refresh, double-click the partition and look again. This key value is found under the hkey current user software Microsoft Windows CurrentVersion Explorer MountPoints F Shell command, and the shell subkey can be deleted. f3 finds the next one and repeats until all of them are cleared.

F5 refreshes and deletes the files under the drive letter. Restart your computer to see the results.