What should I do if the shoes are like this?!

This situation is very normal, and it is okay to maintain it every 3 months.

Basketball shoes are white, such as Ko4 to do this.

There are some shoe-shine shops or specialized maintenance shops in county-level places.

Small problems, don't rush, go to this kind of store, they will do it for you.

Give you a simple and easy-to-use solution to solve it yourself.

Wash carefully with laundry detergent or laundry detergent water, and after washing, wrap the white leather surface of wet shoes tightly with a clean paper towel (preferably a large napkin, if you don't have it, use a roll of toilet paper) and dry it in a ventilated place. The key is that the water absorption of the paper must be good!

Good luck.

I've seen one of the tricks in it. Try it yourself, you can use it;

It's about half an hour of blue ink. Remember that if the sun is really strong, don't let your shoes just shine barely! Be sure to apply a thicker layer of soft white tissues.

I think it should be possible.! Hope it helps!

Try brushing your shoes with white toothpaste, it works.

Add milk with safflower oil to 3; 1. Match, wet with a cloth, and then rub.

Use Amway's silk white, dilute the silk white with water, put the shoes in for about 10 minutes, and then brush it with a small toothbrush, and it's OK!

Cover the surface with white toothpaste, wait for it to dry, peel it off, and then apply a layer of white skin oil.

It's still good, your one is not good, buy a new one.

You can use the friction and whitening effect of toothpaste to erase the yellowed area and play a whitening role, the following five steps are specific steps:

Tools required: 1 toothpaste, 1 toothbrush, 1 wet towel.

1. Put the toothpaste on the yellowed place first.

2. Use a toothbrush to spread the toothpaste evenly.

3. Start brushing with a toothbrush until the marks are completely removed.

4. Use a wet towel to wipe off the remaining toothpaste.

5. After comparison, the visible effect is still okay.

Answer the treatment method of yellowing the white shoe edge: hydrogen peroxide method in a basin of clean water, add 3% concentration of hydrogen peroxide, add a little ammonia to make it weakly alkaline, soak and bleach at room temperature for 3-5 hours, and then brush the shoe edge with a brush, wash it and put it in the sun to dry. Pay attention to wrap the entire upper of the shoe with toilet paper, including the hem, so that the shoe will return to bright white after drying.

The toothpaste method is the most commonly used method, and the effect is also very effective: first brush the shoes with transparent soap and a soft brush, and wash them with water; Brush your shoes with pure white toothpaste and wash them with water; Wrap the shoes with hand paper, wrap the cloth in the place and put it in a cool and ventilated place. Wrapping white paper drying method: When you wash it, you can take white paper (preferably white toilet paper) to wrap your shoes whole, and when the shoes are dry, you will find that there are no yellow marks on the shoes, but there are many yellow marks on the toilet paper.

This method of lead stucco works better if the previous methods are combined.

Ask how to get lead powder when the fire is burning.

How about baking deformation.

Unless you ask a shoe repairer.

Not in general.

Ask a question uh-huh, okay.

Apply toothpaste to the yellowed area, and use the friction and whitening effect of the toothpaste to wipe off the yellowed area and whiten it.

Go up in flames... Don't throw it away.

If you are reluctant, you can go to ** to buy white shoe powder. Wash it and put it on.

After washing, stick a paper towel on the yellow place, it will be better when it dries.

The brush brush can restore some, but not to before, after all, it was burned and not dyed.

Soak the shoes in 84 disinfectant for half an hour.

84 disinfectant has bleaching properties, and its bleaching principle is that Naclo is hydrolyzed to produce HCO (hypochlorous acid) with bleaching properties. HCO is a weaker acid that is less acidic than carbonic acid.

However, it has strong oxidizing properties, which can oxidize and denature reducing substances, so it can play a role in disinfection. CO2 (carbon dioxide) in the air is dissolved in Naclo solution and can be reacted with Naclo to obtain bleaching HCOs. Therefore, white clothes, shoes and other yellowing can be disinfected, sterilized and bleached with 84 disinfectant.

Step Method.

01 Yellowing is mostly due to the quality of the shoes, if your shoes are famous brands but still yellow, it means that you are not washing them properly. When brushing shoes, use soap or laundry detergent for the soles of the shoes, and wash the dermal parts with toothpaste. Remember to rinse any remaining foam thoroughly after washing and dry it with a dry towel.

Remember to keep it out of the dark and dry, and if the sun is too strong, you can take it out and dry it in the evening. (This is my own experience, I am a shoe lover, I hope to give you a little help).

02 Fundamentally eliminate the cause of yellowing of shoes: First of all, try to use neutral detergent when you brush your shoes, and when you wash and dry, you can take white paper (preferably white toilet paper) to wrap your shoes whole, and when the shoes are dry, you will find that the shoes have no yellow marks, but there are many yellow marks on the toilet paper.

03 In addition, if you wait until the shoes are very dirty before brushing, you must use detergent to wash them, and you can use less detergent by wiping them with a soft cloth dipped in water. When washing, you can also wash the shoes with soap or laundry detergent, soak the washed sneakers in beer for three minutes, then take the sneakers to the balcony, put them in the shade, and cover them with toilet paper on the upper of the shoes to dry! The effect is obvious!

04 If the shoes have turned yellow, you can buy lead powder in the store to brush, wash the shoes, brush them when they are wet, and then wrap them in paper to dry to ensure that your shoes are as white as new. If you pay attention to the boots of the Peking Opera actors, the boots are absolutely white, that is, they are painted with lead stucco.

Wash it first, brush it with toothpaste, rinse it well, stuff the inside of the shoes with newspaper, wrap the outside of the shoes with a paper towel, and put them in a cool place to dry.

Your shoes have been bleached with SO2, watered again, and returned to the starting point.