-
Anonymous users2024-02-10If you want to buy a good microphone within 50, it is definitely impossible, of course, there are relatively good ones... If you really want to be cheap, the effect will be good... I recommend yours no model is to look at the appearance...
First of all, it looks more metallic... It's the kind with metal. It looks warmer.。。
No, really, you know what I mean, no. Hehe, I'm using a microphone on a headphone that you can listen to.
What about the effect, how to say, the treble is definitely not good, if it is flat and not very high, the effect is still okay...
Actually, I recommend you to use the Ashion top2 microphone for 270 yuan, and I'm ready to buy one, hehe. I heard that the effect is very good. I can't wait to buy it!!
-
Anonymous users2024-02-09If you want to be cheap, just use an ordinary computer microphone, just ten dollars Now that you know the cooledit recording method, you should also know the effect production, right? The recorded sound removes the noise by itself (80% is OK), and the effect is added. Of course, there is still a certain gap compared with the dynamic microphone, and the money is divided.
-
Anonymous users2024-02-08Then buy a better electret microphone, the one used in the meeting, it is estimated that it will only cost twenty or thirty yuan, but the effect is better than that on the computer headset.
-
Anonymous users2024-02-07The quality of the recording has nothing to do with cooledit, it only has to do with the quality of the microphone, it is best to use a condenser microphone, the recording effect is good, and the brand recommends using the winning PC-K500.
-
Anonymous users2024-02-06When recording, it is only about the settings of the recording control, but there are two more problems here. One is the quality of your microphone, if the quality is very poor, you may not be able to turn on the maximum volume. On the other hand, maybe your computer's hardware configuration has changed, so the parameters in the recording settings have been adjusted.
The simple solution is to see if there are any advanced settings in the recording control options. If so, hit Pick, and then a "Advanced" button will appear below the microphone volume, and when it is turned on, pick "Microphone Boost". Try this way to see if the recording will be louder.
If it doesn't work, then you have to change the hardware.
Of course, there are also very stupid places that we ignore, weakly ask the landlord, have you adjusted the volume on the headset to the maximum? Huh
-
Anonymous users2024-02-05A condenser microphone is recommended, but phantom power is required. It is recommended to be similar to winning and the like, ** can meet the requirements (some are only more than 100 yuan), and the function can also be basically guaranteed. You don't have to think about headphones and headsets.
-
Anonymous users2024-02-04Or is it a matter of the computer's settings to tune the software's mixer and microphone to the maximum.
-
Anonymous users2024-02-03Check to see if your microphone is muted, the computer's default microphone is muted. If not, see if the microphone in Cooledit is the right one.
-
Anonymous users2024-02-02You've already recorded it, it should be a device problem, and it's much better to change the sound card or the transcript.
Shock wave Su-202
49 [Beijing] Merchant**: 47 Vowel Type: Laptop Speaker Speaker System: >>>More
Noise cancelling headphones are mainly divided into two kinds according to the principle: one is passive noise cancellation (passivenoise-cancelling) headphones, the other is active noise cancellation (activenoise-cancelling) headphones 1, passive noise cancelling headphones, also known as physical noise reduction, in fact, it is to do sound isolation is through the sound insulation materials or special structures on the headphones, and try to isolate noise mainly in-ear earbuds and full-cover earphones, but due to the overly tight design, Long-term wear will make the ears swelling and painful, excessive sound pressure will even affect the hearing 2, active noise reduction headphones, through the noise reduction module in electronic noise reduction, is set up in the earphones A special noise reduction circuit is generally through the audio receiver (such as a micro microphone) and the anti-noise output chip, through the reception, analysis of the frequency of external noise and the opposite frequency, mutual weakening or canceling, so as to achieve the purpose of shielding noise Generally speaking, active noise cancelling headphones, the headphones themselves have an "ear", "ear" It is used to listen to external noise, because its "ear" is very close to our cochlea, the ambient noise it hears is very close to the noise that is about to reach the human ear, but there is still a slight deviation; After receiving the noise, the internal electronic noise anti-noise chip will calculate the audio (set to a) and the audio of the noise (set to b) of the file itself, and the actual audio broadcast is actually a b, and the noise b will still be transmitted to the cochlea, then the audio received by the cochlea is a b b a extended information: noise cancelling headphones refer to a kind of earphone noise reduction headphones that use a certain method to reduce noise, using active noise control, different from the passive sound isolation of general headphones, its principle is: >>>More
First of all, you must determine whether there is a problem with your microphone, if there is no problem, then make sure that the hole you plug in is the microphone input hole, and then turn on the advanced options of the volume to see if it is the audio input where is checked mute, if not, then consider your motherboard sound driver!! Good luck!! Of course, there may be a problem with the interface of your computer, so you can try it before and after on a desktop!!
World of Warcraft! The best game of the year.
Or go karting. >>>More
Try to ask the other person to send it to you and see.