How do two Vista share files through a router?

Set the boot password, if you are afraid of trouble, run rundll32 after setting the password, usersrundll, and use the local ......Tick the box on the front and enter the boot password according to the prompts.

Then the steps:1Set up 2 computers as the same workgroup, reverse key - can be set in my computer.

2.Change the name of one of the computers.

3.Restart 2 computers.

4.After entering the system, both computers are open to network discovery, open in network and sharing, there will be prompts, there are also settings for discovering network and sharing, take a look at it yourself.

5.After completing the above steps, you will be able to see 2 computers. If you want to share files, you can set the folder or disk you want to share to share, if it is a home network, you can give the folder full control permissions, so that you can modify the files on computer 1 and computer 2, or paste and copy each other.

Don't think about any security issues, think that it is easy to be hacked or something, this is some people who have nothing to do are worrying about nothing, an ordinary home user, what is worth invading you, and your IP is dynamic, today this address tomorrow that. Just install a kaba and you're good to go. I've been using it this way, installing a virtual machine specifically for browsing dangers**.

So far, no one has stolen any of my information, and I haven't been hit by any virus, if your memory is large enough, it is dangerous to install a virtual machine to browse**, so the poisoning is also in the virtual machine, and it has nothing to do with the host system.

The other computer has a different computer name.

Then use the computer name or computer IP to access it.

If there is a prompt to tell us what the prompt is, it would be best if it could be accessed directly

The IP address is set to a network segment.

Change the name of the computer

If the antivirus software is Nordun, you can't enter the name of the computer during operation, and you need to use the IP to access it (the reason is that the firewall that comes with Nordun is playing tricks).

It's the same as XP, you just need to fill in your wide loan account number in which land game, and you don't need to fill in the IP address, you can get it automatically.

Two computers share a public network, and files can be shared on a local area network.

The local connection IP address must be set to a network segment, such as and .

1. Prerequisites: one cat + one router + three network cables.

admin password: After entering, click on the setup wizard, select the Internet access method of your home, generally oppoe, click Next, and then enter the broadband password provided by China Telecom, China Unicom or Tietong. Next, next, until it's done.

3. After the router is set up, connect one end of another network cable to the network port of the cat, and connect the other end to the WAN port of the router.

4. One end of the last network cable is connected to any remaining network port of the router, and the other end is connected to the network port of another computer.

5. You're done.

1.Double-click to open the "Network" icon on the desktop and follow the steps (below) to set it up.

2.Right-click to open Manage for Computer. Follow the steps in (below) to set it up.

3.Start Menu Run the input command:

4.Delete the "guest" in "Deny access to this computer from the network", that is, the guest user.

5.The network access type is changed to Guest Only - Authenticates the local user as a guest.

6.Find the folder you want to share and follow the steps (below).

7.After the sharing is successful (below).

Note: Don't turn on "Homegroup" and "Join Homegroup" before setting up, select "Public Network" in "Network and Sharing Center".

8.After the sharing is completed, the start menu opens and runs, or press the shortcut key win+r to enter: For example, the IP address of the host of the shared file is: So long to type, you can see the shared file after confirmation.

Click "Share" on the folder step by step, and when you use it, double-click "Online Neighbors" on the other brain and click "View Workgroup Computer".

As a first step, click Start > Computer, and find the folder you want to set up sharing. Then right-click and select the Share command.

Step 2: In the File Sharing Setup Wizard, select the user you want to share the file with from the drop-down list, or select Create New User from the drop-down list to create a new user through the wizard. After the selection of premature beats is complete, the unit "Add" button.

The third step is to set the corresponding permissions for the selected user. Vista provides a total of three types of permissions: "Reader", "Contributor", and "Co-Owner".

Among them, the reader permission will only be able to view the content of the shared file; The participant permission allows them to view files, add files, and delete files that they have added (this option is not available for sharing files alone), but they cannot delete information added by other users. This is a little different from the one in XP. The co-owner, on the other hand, has the highest permissions to manipulate file resources, including viewing, changing, adding, and deleting all shared files.

By default, the user's permission is Reader. We can also click on the user name to change it in the list of permissions that appears. Then click the "Share" button, and Vista will set up the sharing.

After the Vista operation is completed, the access path of the shared resource will be displayed (if there is a problem with DNS, it is recommended to replace the machine name with an IP address). Other users can access the shared resources provided through the access path shownOther notes: 1. You should log in with the username of administrator permission.

Right-click on the computer icon on the desktop and select "Manage" and - User - Double-click Administrator - uncheck the box before the account has been disabled.

2. Right-click the desktop network icon and select "Properties", then open all sharing functions, such as network discovery, file sharing, sharing, etc.

1. Locate the folder where you want to share files.

2. Click one or more files or folders that you want to share, and then click Share in the toolbar.

3. In the File Sharing dialog box, do one of the following:

a.Type the name of the person you want to share the file with, and then click Add.

b.Click the arrow to the right of the text box, and then click Find. Type the name of the user you want to share the file, click Check name, and then click OK.

c.Click the arrow to the right of the text box, and then click "Everyone" to share the file with everyone in your network.

The name of the user or group you select appears in the list of users you want to share the file with.

a.Click Readers to restrict users or groups to only view files in the shared folder.

b.Click Contributors to allow users or groups to view all files, add files, and change or delete files they added.

c.Click Co-owners to allow users or groups to view, change, add, and delete files in the shared folder.

Note: If you're sharing a file instead of a folder, you can't choose to set the permission level to Contributor.

5. After you have finished selecting the users or groups you want to share the file with, click "Share".