Why all of a sudden the computer won t turn on, saying that the system has been damaged

Such system damage is generally caused by the loss of system files or boot files, you can find a ghost system disc or make a boot U disk into the PE system, repair the boot or rebuild the main boot record and then restart, if not, backup the files you need in the C disk under the PE for reinstallation.

Can you enter the system menu, press F8 when you boot up, and then select the last correct configuration ......Try that one, or see if you can get into safe mode, and if you can, do a disk error scan.

There is also a situation where there is a problem with the hard disk or the hard disk data cable.

Reboot: If it doesn't work, you'll have to reinstall the system.

It is also good for the maintenance of the computer to reinstall the system, and the landlord does not have to worry.

Non-genuine systems are often like this,Don't make a fuss,It's very simple to reinstall the system,Install it,It's best to do a one-click restore backup of the C disk system files,You won't need a disc to install the system in the future,It's very simple。

Cleaning up the garbage is wrong.

Method:1Restart your computer.

2.One-click recovery.

Are there any important documents? If you have a micro system made of a USB flash drive, enter the computer, copy the files you want first, and then install the system, if you don't understand, you can hi me.

It may be that the computer has been attacked by a virus and has been damaged! Get it to the computer repair shop and reinstall the system!

Restart your computer, or reinstall it.

Operating system: Windows 10

After several attempts, your PC still won't boot here

1. After the official website of the computer system is reinstalled, we will turn on the computer, and when the interface of the win10 startup logo, then press and hold the power button to force the shutdown, and then shut down, and then to the interface of the win10 startup logo, and then press and hold the power button to force the shutdown, repeat this operation three times, there is a diagnosis of your computer, and the automatic repair interface will appear as soon as possible. (as shown in the image below).

2. At this time, the computer will enter the automatic repair interface, and we click on the advanced options. (as shown in the image below).

3. Click on the Troubleshoot option again. (as shown in the image below).

4. Then click on Advanced Options. (as shown in the image below).

5. In the advanced options interface, we click on Launch Settings. (as shown in the image below).

6. In the startup settings interface, we click Restart. (as shown in the image below).

7. The state number 4-6 of the socks are all safe modes, we can choose it according to our needs, there is no need for the network, press the number 4 key or F4 key, and enable the safe mode. (as shown in the image below).

8. After entering win10 security mode, think about what software was installed before encountering this problem, whether the driver was updated, such as the graphics card driver, uninstalled it, and tried to turn it on. We come to Win10 safe mode, click on the start menu, then click on Settings, and in the Windows settings interface, click on Apply. (as shown in the image below).

9. We will sort according to the installation date, uninstall all the software installed recently or on the same day, and try to see if it can enter the win10 system normally. (as shown in the image below).

In the case that the display system has been damaged, the advanced PE system needs to try to repair the vertical code pin to the program, if this still cannot enter the system, you need to re-mold and install the system.

The computer system is damaged, this needs to reinstall a system for your computer, if there is no mirror image of the system at hand, there is no boot disk, you can make one first, and then reinstall it.

The display system has been damaged, you need to enter the PE system to repair the bootloader first, if you repair the wide hole after the heavy wide preparation or can not enter the system, you need to carefully install the system.

The most straightforward way is to reinstall the W N10 system or reset the system.

Reason why the system does not boot properly:

1. If the system bootloader is lost, the software of the system is damaged;

Solution: Make a USB flash drive PE system, enter the PE system, and repair the system bootloader.

2. The system is damaged. Spike repentance does.

Reinstall the Purity System.

It is recommended to install a clean version of the system. If you want win7 pure system.

Here's how to install the GHOTS version of the CD

The first step is the same as above, enter the BIOS, set the optical drive to start, the second step, just put the disc into the optical drive, start the computer, enter a boot menu, you just click 1 and it's done, it will be installed automatically.

The fourth step is to use the one-click restore on the ghost version of the disc as a backup, and that's it.

3. The computer guessing hardware is damaged.

Solution: Go to the repair shop to find the master to replace the hard precursor parts.

The computer system is broken is the reason

1. If the file is damaged, it can enter the operating system without delay.

2. There is a virus in the system, and the antivirus software cannot deal with it.

3. There are various errors in the system, and it is more troublesome to modify the settings, so it is more convenient to reinstall the system directly.

4. The system runs slowly, and all kinds of junk files increase.

5. I want to change to another version of the system.

6. If you replace the new hardware, you can't enter the system, such as hard disks, graphics cards, etc.

1. Press F8 to press F8 to get the advanced option to appear in the release of the power, and select "The latest correct configuration" Enter to repair.

2. Please boot the computer and press F8 to enter the safe mode, use the system's built-in system restore, and restore to the time when there is no fault to repair.

3. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired.

4. If the fault persists, set the optical drive in the BIOS as the first boot device, insert it into the system installation disk, press the R button, and select "Repair Installation".

5. If the fault persists, it is recommended to reinstall the operating system.

If it really doesn't work, it is recommended to choose repair installation, so that the system can be repaired, and the programs and files of the C drive can not be lost.

This problem is that the screen is black, and the directory of the files is displayed on it, and there are missing files! No way, reinstall the system! The chances of other computer files being the same as yours are too small!

It's easy to do if you have a system disk.,You can fix it.,No, boot it and press F8 to enter safe mode to restore the last correct configuration.,If it doesn't work, you can only reinstall the system.。

It is recommended that you try to change the power battery first, if it still doesn't work, the parts of the machine itself are loose or the chip is damaged by virtual soldering, common reasons: the memory is loose or the memory itself is problematic, reinsert the memory or change the memory to try; The power supply chip of the motherboard is soldered or aged, the screen cable is loose or the motherboard short-circuits the power supply circuit of the screen; Graphics card, south bridge, north bridge BGA packaging chip virtual soldering or damage, generally there are more virtual soldering, just add soldering.

Depending on which files are corrupted, some can be copied from other machines and put in the corresponding directory, and some must be recovered with a system installation disk as prompted (a certain foundation is required). It is recommended to use PE to copy the important data of the C drive (including desktop, my documents, etc.) to other disks after entering the system, and then use the ghost version of the system disk or previous backups to restore the system.

The boot area file is broken, reinstall the system.