-
It seems that the concept of landlord is not fully understood;
Traffic refers to the data you and other hosts transmit over the network, and the meaning of your question is easy to misunderstand.
First of all, the meaning of your question, theoretically, if there is no data exchange in the established network, there will be no traffic, but this ideal state basically does not exist, even if there is no communication in the network, as far as the current Ethernet mechanism is concerned, it will also generate listening packets from time to time to determine the state of the network. Therefore, theoretically, there can be a network without traffic, which means that it is meaningless in reality;
Now let's take a look at your report; The amount of traffic reported refers to the continuous increase in the amount of data transmitted in the Internet; Causing network congestion; My understanding is that the intention of the report is to refer to the increasing number of Internet users, which leads to the exhaustion of Internet IP resources, or the lack of resources of ISP service providers, resulting in the inability to access the Internet. But there's no need to worry about that, because now IPv6 has made the IP address enough for the whole world, and you can read the relevant books.
Wrong place to point out?
-
How can the traffic run out? Internet access is transmitted via fiber optic cables. Traffic is not a non-renewable resource!
Unless you can shut down the world's Internet technology, or the country stipulates how much data each person can use per computer for a day or a month, but I don't think so. I advise you not to worry anymore. I'm too sleepy, I'm sleeping, that's all, remember to choose me!
-
Theoretically, yes, once the traffic is full, it can't be up.
But you can go to the Netcom company to ask for an increase If you're lucky, you can apply for it, but the price is also very expensive, it's 1 trillion 7 cents.
-
Yes, it will not be able to go up after the traffic is restricted.
-
OK. But you have to charge money, and it's expensive. 1 trillion 1 bucks.
-
If there is a problem, traffic is not a non-renewable resource.
-
Hello, just because you run out of mobile data doesn't mean you can't access the Internet.
If you continue to surf the Internet, you will be charged for the data you generate.
It's best to buy a traffic package, otherwise you will incur a lot of costs.
Hope it helps!
-
When the traffic runs out, it will not automatically stop, and you can continue to use it, and now the operator wants to make more money. Know that ** is down in arrears. There is no restriction on the use of data usage when the data usage deduction reaches a certain fee, and it is only available for the current month. It is recommended to open a flow refueling package, otherwise the deduction will be very strong.
-
There are 2 reasons, one is to have a wireless network.
The other is super traffic consumption, if it is this, turn it off quickly, the cost is very high.
-
Mobile phone traffic is generally ** internal traffic, after the traffic is used up, the traffic of the poor student will be deducted from your phone bill, it is not cost-effective, it is recommended that you do another traffic package.
-
Hurry up and turn it off, your data link is still open when the fixed traffic runs out, and you will be charged per kb, which is very expensive.
-
Of course, you can also surf the Internet when the traffic is gone, and the phone bill will be deducted directly.
-
wifi。Or wait for you to use it, and when you run out, I will find you to settle the general account.
-
You can use it when you run out of traffic, and the cost is very expensive.
-
Explain that you used the free wifi nearby
-
If you are using a China Unicom card, you may not be able to access the Internet for the following reasons:
2.China Unicom card does not have the Internet access function;
3.The mobile terminal does not support the network of the Unicom business used;
4.** There is a range of use for traffic (such as directional traffic, cell traffic, etc.);
5.Whether the traffic switch in the mobile phone is turned on;
6.**Check whether the traffic in the current month has reached the maximum traffic value.
-
This is a feature that comes from the network.
1 Just like a child who can't see his mother when he is a child, a child who can't see his mother will first cry and send a signal from his mother to find his mother, then the mother will run to comfort the child, and if the mother is not there, the child will cry and then send a signal to look for an adult.
2 The same is true for mobile phones, when the mobile phone has no data connection and signal connection, the mobile phone will automatically send a data search signal to find a hidden station, that is, the mobile phone base station in a silent state, and the mobile phone communication tower to obtain the signal connection, data connection, if it has not been found, the mobile phone will find it again every once in a while.
3 When the mobile phone finds the mobile phone base station with a signal through the transmission signal, and then the parameters will be checked between the two, such as whether it is within its own service range, whether the frequency is correct, whether it can provide the services required by the mobile phone, etc., this is also transmitted between the base station and the mobile phone, and the mobile phone is required to send traffic, that is, negotiation.
4 If the negotiation between the mobile phone and the base station cannot be completed, the base station will attack and refuse to access, and the mobile phone will also check the dust to find other base stations, which also requires a certain amount of traffic.
5 Traffic here to say, in addition to our usual movies, watching, chat data, traffic also carries the mobile phone and mobile phone base station to negotiate brother data, this is equivalent to a courier package, the outside of the package is your address, **number, inside is your items, the courier needs the address on the express package to determine the package to be sent to**, to whom, the package inside is what the user needs, both are indispensable.
-
There may be a caching phase, transient.
-
1.Data limits: First, make sure that your phone or device's data feature is turned on.
Sometimes, the data function will be automatically turned off on the phone after a certain data limit is exceeded, and you need to manually enable it. You can find the data option in your phone's settings and make sure it's turned on.
Setup error: APN (Access Point Name) is an information configuration used to connect to the mobile network. If the APN is set incorrectly, your device may not be able to connect properly with your carrier's mobile network.
You can find the APN option in your phone's settings and check if it's set up correctly. If you are unsure of the correct APN settings, please contact your carrier's customer service and they will provide you with the correct APN configuration information.
3.Network coverage issues: If you find that you can't access the internet only in certain locations or at certain times, it may be because of unstable coverage or weak signal. In this case, you can try moving to an area with a strong signal or wait for the network to return to normal.
4.Overdue or downtime: If your mobile** is in arrears or expired, your carrier may stop providing you with data service. Make sure that your status is normal, such as paying your fees in a timely manner, to ensure that your data service is not interrupted. Volta.
5.Device setting issues: When the Office of Governors is disturbed, the settings of the device may cause the data to be unavailable. You can try restarting your device, or check your network settings, VPN settings, etc., and make sure you don't have an option to block your data traffic.
If you've tried the above methods and still can't fix the problem, we recommend contacting your carrier's customer service. They can further examine and provide a solution specific to your specific situation. <>
-
The reasons are: 1. The signal is not good, especially in some remote places, such as mountainous areas, suburbs, basements, parking lots and other places with poor signal coverage, resulting in 3G and 4G network signals.
2. When the wifi and data traffic are turned on at the same time, the mobile phone detects the wifi signal, and it will automatically give priority to the use of wifi and disable the 3G and 4G networks. In this case, check whether the wifi switch is turned off first, if not, turn it off first, and then turn on the data traffic switch.
The landlords are so professional.
You're going to die... >>>More
First try if you go back to the house first, open P2P, and wait until they come back so that the web page won't open, which means that they don't have P2P Terminator installed, you can install a little limit their host speed. >>>More
Online games consume very little network traffic.
You're limited in your flow rate per second, right? >>>More
Go online and search for the speed test of your local telecom or Netcom or Tietong**. If the speed is between 100-200, it is 1m, and if the speed is between 200-300, it is 2m. The file after the speed test will not occupy disk space, and the disk cleaning file will be cleaned up after the speed test is completed.
There is one of the most effective solutions in our computer room. It is to pull the cord as soon as it is attacked. Do it a few more times. The customer will be very autonomous to call ** to tell you that I was attacked to pull the cord handle...