How to make the computer screen go black quickly please thank you

Right-click on Properties-Settings,There's a screen saver in it that's black,Nothing,Time setting1 minute,Change auto-sleep to never,Then press fn+end to adjust the screen brightness to the lowest,Wait until 1 minute later, the screen saver runs,The brightness becomes very small,And then turn the book in another direction,That's it.,I've been using this method.,I haven't turned off the computer since February 1st.。 Hope it helps.

Desktop right-click properties--- screen saver There is a power supply in the lower right corner Tap on The power usage scheme has an off monitor Set to 1 minute You can also close the computer directly, but you have to --- Advanced in the power settings and choose not to take any action when closing the laptop.

Implement Start Running User Configuration Administrative Templates Control Panel with Group Policy Display Screen Saver Timeout Enabled. Then enter the enablement time, in seconds. Then enable the screensaver to go black.

In the power settings, you can choose to turn off the monitor for a certain period of time. Quickly turn off the display, and you can set that time to 1 minute.

You can set the time· ·1 minute can be black screen · Display settings in settings

Click Properties, click Frequency Screen Protection, select a black screen, and then click Preview to leave him alone

Summary. The easiest way to make the computer black screen is to make the computer automatically sleep, there is no hibernation interface, first turn on the computer, click the start button, select the control panel - hardware and sound in turn, find the power supply, and then click "change the computer sleep time", after entering the interface, you can freely adjust the time you want to choose in "make the computer go to sleep".

Another way is to let the screen standby, that is, the host computer is running normally and the computer screen is off.

How to make the computer screen black.

The easiest way to make the computer black screen, the easiest way to make the computer automatically sleep, there is no hibernation interface, first turn on the computer, click on the start button, select the control panel - hardware and sound socks in turn, find the power supply, and then click "change the computer sleep time", after entering the interface, in the "make the computer sleep state" you can freely adjust the time you want to choose. Another way is to let the screen standby, that is, the host computer is running normally and the computer screen is off. Reputation is exciting.

Black screen. Right-click on the properties on the desktop, then screen saver, and then select blank in the lower mode, and set the time directly. This method is generally used for automatic entry of the laptop when it is not in use for a long time, such as a screensaver.

If you leave temporarily, or enter the Heichang shed screen mode in a hurry, you can use the finger Xun that comes with the notebook. To do this, find the FN key on your keyboard, usually between CRTL and ALT.

Then look for notebook F1 F12. There is usually a small screen icon on the keyboard, and you can use the fn+ key with the small icon to immediately enter the black screen mode. If you have a pen and a notebook, you can directly press the power button to enter sleep mode, and if you wake up with a mouse, it is similar to entering the screensaver.

Hello! Regarding the question 1 you saidIf it is a laptop, you can press fn+f2 f7 A certain F key, depending on different notebook brands and models, that is, there is a key with a display logo on it, so that you can achieve a black screen, and press Li Tong again when recovering.

2.If it's a desktop, there is currently a shortcut key to turn off the monitor, but you can directly turn off the power of the monitor. 3.

In fact, it is estimated that lz wants to quickly cut out the current interface and pretend that nothing has been done, right? There is another way to try, press Win+D (that is, the key of the Windows logo), which can directly display the desktop, and press it again, and the operation window will be restored. win+m is to minimize all windows, and the effect will be displayed like the sail scrambler, but pressing again will not restore the original window.

There are several ways to make your computer screen black:

1.Dormant Qizhou mu mode:In Windows, you can click the "Start" menu, select the "Shut Down" or "Logout" option, and select "Hibernation" in the pop-up dialog box to put the computer into hibernation mode, at which time the computer screen will turn black.

2.Lock Screen Mode:On Windows, you can put your computer into lock screen mode by pressing the "Windows+L" key combination or clicking on the Start menu and selecting the "Lock Screen" option, at which point the computer screen will turn black.

3.Screen Saver Mode:In Windows, you can click the "Start" menu, select "Settings" - "Personalization" - "Screen Saver" to set the screen saver mode, at this time the computer screen will enter the screen saver mode, the screen will go black or show other screensaver content.

4.Turn off the display:If you just want to make the computer screen black, instead of putting the entire computer into sleep or lock mode, you can turn off the monitor by pressing the power button on the computer monitor or adjusting the brightness of the monitor, and the computer screen will go silently black.

It should be noted that the above method only makes the computer screen black, not to turn the computer completely off or enter sleep mode. If you need to shut down your computer completely or put it into sleep mode, you need to press the power button on your computer's host computer or use the shutdown option in your operating system.

At the same time, you need to pay attention to the security of your computer, and do not let others operate your computer without permission, so as not to cause data loss or other security problems.

Steps. 1. Click the start menu of the taskbar, find the "Control Panel" option, then open the control panel, and find the "Power Options" button in the control panel. Steps.

2. Double-click "Power Options" to open the setting window of power options, and then click to select the "Change Computer Sleep Time" option. Steps.

3. Finally, set the time of "turn off the monitor" and the specific time of "Zen people make the computer go to sleep" above the settings of the change plan. [ooooo

Question 1: What key can I press to make the computer screen go black immediately? In the past, the keyboard used to have a sleep key and a work key, but now it seems that there are no more.

You can set it: press the power of the main unit to go to sleep. This way you can press the host power to enter the black screen and press it again to recover.

Screensaver Power Advanced Press the host power: power off, sleep, no operation, etc.

Question 2: How to make the computer quickly become a sleeping black screen Some keyboards have sleep directly on it, and it will sleep as soon as you press it.

You can also set the computer's boot button in the BIOS, and it will sleep with a tap.

Generally, you can wake up by pressing the left mouse button.

If you are afraid of what others will see, you can also use the quick lock screen, windows key + L, you can lock the screen immediately, try it is also very useful.

Question 3: How to make the desktop computer quickly enter the black screen state of stool noise standby right-click on the desktop, Properties.

Find the tab of the screensaver.

There is a monitor off setting, so you can set the monitor to turn off automatically when there is no operation.

The display turns on automatically when you press the keys and move the mouse.

Question 4: How can I make my computer enter the standby black screen state instantly? After pressing the Windows logo key, press the L key twice in a row.

Question 5: How to make the computer screen go black instantly? What key to press on the laptop F1 to F12 There will be a key painted with the moon icon, you look for it first, each brand of notebook is different, after finding it, press and hold the fn key and then press the key with the moon icon you found to instantly make the notebook standby to achieve the effect of black screen, but the host is still running, you can press the boot button if you want to start, I hope it can help you....

Question 6: Is there a shortcut key for a black screen computer It is simply to make the screen black, you can use fn+f2;

If it's a desktop, turn off the monitor.

You can also search for power options in the control panel.

Question 7: How to set the computer screen not to automatically go black is available in the computer power options.

No operation How many minutes after turning off the monitor and how many minutes after turning off the hard drive.

Question 8: How to press the shortcut key when the computer is black when the computer is not turned off, and the shortcut key to open Some computers do not have this function. For example, mine is MSI's useless, and ASUS's press fn and f7 will make the screen black.

Question 9: Is there any shortcut key on the computer that makes the computer quickly black The notebook seems to be fn+f1, and the brightness is the lowest. The power setting power button is hibernating, press it and it will be black, and the world knows that there is also to close the computer cover.

If you are on a desktop, turn off the monitor switch or unplug the power supply, or let the circuit short-circuit, smash the screen, etc.

Question 10: How to make the computer screen go black quickly Sometimes at night, I want to turn off the laptop display, and I want to continue to read things.

My solution is: right-click on the desktop Properties Screensaver Power Advanced, and choose to take no action when the laptop is closed. When you close your notebook, it doesn't go into standby and sleep.