-
There are generally the following reasons for the low volume of Apple mobile phones:
2. The volume of the mobile phone is not adjusted to the maximum.
3. When the volume of the mobile phone is at the maximum, if you still feel that the volume is low, you can turn on the hearing aid mode of the mobile phone to amplify the volume.
Solution: 1. The volume of the mobile phone is not adjusted to the maximum.
-
First of all, check whether your Apple 8P speaker is blocked by dust, clean it up or if the sound is small, go to the after-sales maintenance office to check it, and if you are under warranty, you can go to the Apple direct store in Beijing to see,
-
You can have specific hype that can make your phone louder.
-
The solution is as follows: first go to [Settings] - [General] - [Accessibility] and turn on the [**Noise Cancellation] switch; It is also possible that the earpiece part of the water ingress causes the handset module to malfunction, although the iphone8 series is IP67 waterproof, but the earpiece and speaker part are still the weak link of waterproofing, it is recommended to go to the after-sales point to overhaul it. 8P earpiece sound suddenly becomes smaller1, open the mobile phone [Settings] - [General] - [Accessibility], turn on the [**Noise Cancellation] switch in the auxiliary, and try to see if there is any improvement; 2. If it is still within the warranty period, it is recommended to check it at Apple's direct store or officially authorized store, it may be due to the failure of the handset module.
The above is mine, I hope it helps you <>
-
1. Press the volume adjustment button on the side of the screen when you are on a call, and adjust the sound volume. There are two volume buttons on the left side of the front of the Apple mobile phone, when we are playing**, please press the volume plus button, so that you can adjust the sound of the call to the maximum, and you can also see the sound size icon on the screen.
Second, in general, the above methods can be used to solve this problem. If you still feel that the voice is quiet, please pay attention to the posture of answering **. Since some Apple phones (such as iPhone 6 Plus) are big and long, they may not have adapted to it for a while, and they are too far away from the ears.
3. You can also change other ** cards to try it and see if it is a problem with Qinghong card.
Fourth, if it does not belong to the situation of the high reputation, it is recommended to send the Apple mobile phone to the Apple repair center for testing whether it is a hardware failure.
-
If it doesn't work, open the settings, find the general options, find the accessibility function, turn on the noise cancellation function, or you can turn on the hearing aid compatibility button, which can only turn on one of the two.
1. During the call, you can directly press the volume button on the left side of the phone to adjust the sound to the maximum, 2. If you feel that the sound is still small, click to open the settings, 3. After opening the settings page, find the general settings, 4. After opening the general settings, you can smile and see that there are auxiliary functions, click to turn it on, 5. Then turn on the function of noise cancellation, turn on this function to reduce the ambient noise and make the voice clearer, 6. Or you can also turn on the compatibility of hearing aids, which is also another way to make ** 7. These two settings can be opened one, and two cannot be opened at the same time.
The above is the solution to what to do if the sound of Apple 8P is small, I hope it can help you.
-
Apple8P solution to low sound: 1. Press and hold the volume plus button on the side to raise the sound of the phone to the highest and see if the sound can be louder.
2. If the number of bending and seepage is small, the new machine can tear off the protective film that comes with the factory, and the other party can listen to our normal sound size. If the other party's voice is too quiet, press and hold the volume plus button when talking to adjust the appropriate volume.
3. Find the settings in the mobile phone, click to enter, then click General, click Accessibility in the general interface, enter the accessibility interface, and remove the noise.
4. If the phone is in a situation where the volume cannot be adjusted, it may be that there is a bug in the system of the mobile phone, check whether the system of the mobile phone is the latest version, if it can be upgraded, try to upgrade to the latest version, and fix the bug on the volume of the mobile phone. If you don't want to upgrade the system, you can put your phone into DFU mode, then connect it to your computer and repair the system through iTunes.
Apple 8P use skills:Find the shouting album in the mobile phone,Click to enter,Find a picture in the album** that you want to hide**,After selecting this**,Click Hide below,Then the hidden** will not appear in other locations。
-
Hello, the sound of the pro-Apple 8 call can be solved by the following steps: 1. On the side of the Apple 8 mobile phone, press the volume plus button to turn up the volume; 2. In the "Settings" section, find the "General" option for the preparation of mu and click it, and in the "General" option, find the "Accessibility" option and click to enter; 3. In the "Accessibility" option, find the "Hearing Aid Imitation Book" function in the hearing function, click to enter, and in the "Hearing Aid" function, find the "Hearing Aid Mode" slide the button to the right to open the hearing aid mode; 4. Turn off "** Noise Elimination" in "Settings" - "General" - "Accessibility", so that the sound of mobile phone calls can become louder. 5. If the sound of the phone still does not return to normal, it may be that there is an error in the Apple mobile phone system, you can try to restart the phone to see if it is solved, if not, you can try to restore the factory settings of the mobile phone; 6. If there is still no improvement, it is recommended to contact the after-sales service of the Apple mobile phone to check and verify.
-
Here's how:
1. Click the volume + button on the left, and click the volume plus button on the left to increase the volume.
Method 21: Open your phone and tap Settings.
2. On the page that opens, click General.
3. Click Accessibility.
4. Tap Assistive Listening Devices.
5. Turn off the hearing aid mode first, and then return to the auxiliary settings.
6. Turn on ** Noise Cancellation is OK.
-
There are many reasons for the low sound, there is a lot of dust, the problem of the earpiece, the mobile phone settings, and the solutions are as follows:
Here's how dust causes it:
1 For more obvious external dust, you can try to clean it with some soft small brushes.
2 For some imperceptible or fine dust, you can try to use double-sided tape with good viscosity, tear it into a ribbon, and then stick the double-sided tape on the microphone or speaker, and after easy smoothing, tear off the double-sided tape to stick out a lot of small dust that you have not noticed.
Here's how to fix the setup:
1 First, adjust the volume adjustment button on the side of the phone to the maximum.
2 If not, make sure that Ring Mode is turned on, Ring Mode Open Path: Open Settings.
3 Swipe up in Settings and click Sound to enter.
4 In the sound interface, turn on the ring mode and adjust the sound volume to the appropriate position.
-
1. You can check whether the volume is up, you can press the volume + tone key on the screen to try.
2. You can check whether the phone is on silent mode, if there is no sound when the call comes in silent mode.
3. If the speaker problem is a hardware failure, then you need to find a local Apple repair center to test the machine.
-
Throw it directly in the trash and use Huawei instead....
-
Check it first to see if there is ash or dust at the bottom of the speaker, clean it with a brush, and then try it after cleaning, if it can't be solved, you may need to replace the speaker, don't get water or alcohol when cleaning, and the earpiece sound is small.
1. First of all, open the phone's settings, general, and accessibility functions. In the next interface, turn on Mono Audio and Noise Cancellation.
2. Also open the phone's settings first, find the equalizer, and change the mode to late night.
3. If it is not the hardware of the mobile phone itself, then it may be caused by external reasons The sound of the mobile phone is low, choose small brushes and alcohol utensils. Find the external speaker of the phone, you will find that this part of the phone is stuffed with dust, use a brush dipped in a little alcohol to clean off the dust. If there is no sound when playing **, then it is possible that the volume of the receiver or speaker is too low, just turn them up; It is also possible that the receiver of the phone is broken, and if this is the reason, then it is best to take the phone to a repair shop for repair.
-
The solution to the low sound of the Apple mobile phone is as follows:Tool: iPhone 12
System: iOS 13
Software: Settings.
1. First of all, we open the settings option of the mobile phone desktop, and then click the ** function on the settings page.
2. At this time, click on the equalizer option on the ** page.
3. Next, select the late-night mode on the equalizer page, so that you can successfully solve the problem of particularly small sound.
-
It is caused by the environmental noise in **, and the solution is as follows:
1. First unlock the Apple phone, and then find [Settings] in the phone, as shown in the figure below.
2. Then in the settings page that opens, click [Accessibility], as shown in the figure below.
3. Then in the page that opens, scroll down, find and click [Audio Vision], as shown in the figure below.
Try to ask a few questions:
Confirm if the router is damaged and there is no wifi; >>>More
Choose Huawei P40Pro. In terms of exterior design, Huawei P40 Pro and iPhone 8Plus are completely products of two worlds, if iPhone8Plus belongs to the past, then Huawei P40 Pro symbolizes the future. >>>More
3. After the installation is completed, click to enter the application, use Kuaishou to enter the mobile phone number bound to Kuaishou and obtain the verification code to log in on the login interface. >>>More
This is due to the sound being turned down or a hardware issue. >>>More
After deactivation, you can use iTunes to recover. Use an original data cable (non-original with data recognition function is also acceptable) to connect to the computer. >>>More