-
It should be good to rinse, or you decorate it with some water and start it, the stainless steel one is still very easy to wash.
-
Generally, when buying a soymilk machine, a rough dishcloth is given, and it is also sold in supermarkets.
-
Use a soft scouring pad and you'll be fine.
-
The cleaning method of bile rust in Joyoung soymilk machine is as follows:
1. Effervescent tablets
Soak the effervescent tablets in the inner tank of the Joyoung soymilk machine, rinse the inner tank with water, and the dust will fall off. This method should be careful with the stainless steel part of the machine, if it takes too long, it will rust.
2. Bicarbonate
Use an appropriate amount of baking soda on the inner liner of Joyoung soybean milk maker, soak it in water, and then scrub it with a cleaning cloth.
3. Alcohol
Use a dry cotton cloth dipped in an appropriate amount of alcohol to scrub the inner liner of the Joyoung soymilk machine, so that the inner liner of the Joyoung soymilk machine will be as clean and bright as the one you just bought.
4. Clean the ball
The disadvantage of cleaning the inner tank of Joyoung soybean milk machine with cleaning ball is that the stainless steel part will be damaged, which will reduce the service life of the barrel, but the effect is still very good.
5. Toothpaste
Squeeze an appropriate amount of toothpaste on the replaced toothbrush, then add an appropriate amount of water, and scrub the inner tank of the Joyoung soymilk machine vigorously.
Joyoung soymilk machine can make five grains soymilk, whole soybean milk, fruit and vegetable soymilk, corn juice patented easy-to-clean multi-functional soymilk machine unique simmering process, boiled thoroughly, drink fragrant lafal net, large mesh, bottomless net, easy to touch buttons for cleaning, blue backlight display, sound and light alarm intelligent safety protection.
-
Usually we all think that stainless steel will not rust, but due to the complex use environment, stainless steel will also have rust under certain conditions, once rust can be removed by soaking it in vinegar and wiping it with a scouring pad.
-
You can soak it in vinegar and water for 10 minutes, if you feel dirt, it is recommended to scrub it with gauze dipped in salt, which can achieve the effect of sterilization and descaling!!
-
How to remove the dirt from the inner liner of the soymilk maker:
1. Use white vinegar.
1. Rinse the soymilk machine with water.
2. Add an appropriate amount of water and white vinegar and soak for a while.
3. Scrub repeatedly with a cotton cloth.
2. Use edible alkali in the kitchen.
1. Use a sponge to dip some edible alkali.
2. Pour some water into the soymilk machine.
3. Then start to foam with a sponge.
4. Finally, rinse with water.
-
How to remove the dirt from the inner liner of the soymilk maker:
1. Use white vinegar.
1. Rinse the soymilk machine with water.
2. Add an appropriate amount of water and white vinegar and soak for a while.
3. Scrub repeatedly with a cotton cloth.
2. Use edible alkali in the kitchen.
1. Use a sponge to dip some edible alkali.
2. Pour some water into the soymilk machine.
3. Then start to foam with a sponge.
4. Finally, rinse with water.
-
1. Rub with potatoes. Peel the potatoes and wipe the rust inside the soymilk machine, repeating it many times to remove the rust without causing damage.
2. Wipe with toothpaste. Wipe the soymilk machine with a toothbrush dipped in toothpaste to clean the inside of the soymilk machine, but it should be noted that after wiping the song, it should be rinsed with Qingying grinding water, and if the rust is difficult to remove, it should be wiped several times.
3. Wipe with lead vinegar. Wipe the stains or rust stains with 15% acetic acid solution and wash them the next day to remove the stains and rust together.
4. Wipe with lemon water. Moisten the rust stains with 10% citric acid solution, then add salt, and scrub again the next day to remove the rust. If the effect is not good, try oxalic acid solution instead!
-
How to remove the dirt from the inner liner of the soymilk maker:
1. Use white vinegar.
1. Rinse the soymilk machine with water.
2. Add an appropriate amount of water and white vinegar and soak for a while.
3. Scrub repeatedly with a cotton cloth.
2. Use edible alkali in the kitchen.
1. Use a sponge to dip some edible alkali.
2. Pour some water into the soymilk machine.
3. Then start to foam with a sponge.
4. Finally, rinse with water.
-
Dip a clean dish towel or paper towel in a little toothpaste and wipe with some force.
-
Try to rinse with dish soap and water, but do not use low-concentration hydrochloric acid.
-
White vinegar and water can be washed.
-
The dirt in the inner part of the soymilk machine is the residue of soymilk. Because the bai soymilk machine is heated at the bottom, the okara du
Adhesion to the bottom of zhi, it will accumulate more and more over time, and it is easy to paste the pot, it is best to clean it in time.
How to clean the dirt at the bottom of the soymilk machine:
1. Wash and clean with steel wool balls, which is easy to cause scratches to the stainless steel gall.
2. Pour in a little white vinegar and wipe it with a dishcloth, the dirt is thin and less, and it is easy to wipe off with this method.
3. Pour in a little 84 and soak overnight, and wash it several times the next day until it is odorless. Or wash and wash the meal to remove the smell.
4. Wipe with a damp cloth dipped in toothpaste, the descaling effect of toothpaste is very good, and it can also sterilize.
In addition, the key to decontamination is to clean it after each use, the thicker the dirt, the more difficult it is to clean and can breed bacteria.
-
Hello, the simplest and most direct way is to use descaler, this kind of thing can be bought in the place where the water dispenser is sold, and then you just need to follow the instructions to do it, and the descaling effect is very good.
-
How to remove the dirt from the inner liner of the soymilk maker:
1. Use white vinegar.
1. Rinse the soymilk machine with water.
2. Add an appropriate amount of water and white vinegar and soak for a while.
3. Scrub repeatedly with a cotton cloth.
2. Use edible alkali in the kitchen.
1. Use a sponge to dip some edible alkali.
2. Pour some water into the soymilk machine.
3. Then start to foam with a sponge.
4. Finally, rinse with water.
Personally, I think stainless steel is better, easy to clean, plastic is OK at the beginning, after a period of time, because grinding beans will leave a lot of scratches, it looks dirty, it looks unclean and can not be washed off is very troublesome, as for the hot problem, stainless steel is a little hot, but it mainly depends on what kind of you buy, like the white one is thicker, not very hot, the old-fashioned wall is thin, it is naturally very hot, the purchase of soymilk machine mainly depends on a few points: examples. >>>More
Cleaning method of soymilk machine seven:
To clean the barrel, it is necessary to loosen it clockwise, remove the slurry separator, pour out the bean dregs after pulping, and gently wash the soybean milk fibers on the surface with water and brushes. >>>More
If it is commonly used for aluminized domestic ovens, and if stainless steel is better for commercial ovens, the following is a comparison of the two: >>>More
There are many types of paint, in fact, most of the paints are not acid-resistant, soaked with dilute nitric acid, and the paint will fall off quickly. >>>More
I recommend Oujingle, although it is stainless steel, but it is still very beautiful, and the color and appearance are all my favorite styles.