Apple 5 charger can t slide when charging

My apple 5 also has a screen that doesn't work when charging, and the screen fails when charging an online iphone phone.

I accidentally found that the screen would fail when the mobile phone was charging, and solved it decisively. Most of the answers are so-called original charger data cable questions! But buddy even experimented with the original three-seater of the Hong Kong version, and the result was useless, so I had no choice but to decisively check the working principle of the capacitive screen.

The detailed principle is not detailed, it is too complicated and it is difficult to understand non-professional work) finally understand the two major elements that affect the work of the capacitive screen, one is weak static electricity, and the other is temperature, if the insulator moves the screen will never move! (I don't believe that you can experiment, of course, friends who understand what capacitance means don't need to explain) The temperature is higher than 45 degrees, and the capacitive screen will fail for a short time. Therefore, when the mobile phone uses the protective case, especially when the fully enclosed one, the temperature is particularly easy to rise during the charging process, which is one of the reasons, and secondly, when the mobile phone is charged in the process of special metal shell, the mobile phone is electrostatic, when the human body static electricity and the mobile phone static electricity are neutralized, (I don't understand) then it is equal to no discharge, and no discharge is equal to the insulator touching the screen.

Naturally there was no response! So when the screen fails during the charging process of the mobile phone, don't waste money to buy the so-called original, the problem is easy to solve, remove the protective case, try to touch the metal frame of the mobile phone with two fingers, the problem is generally OK! If it doesn't work, congratulations, you can go to the after-sales service for a new machine!

The charger is not good, there will be this problem, my previous 4S is like this, when I plug in this charging, press the number to jump, and then change the charger on the OK, I hope you change the charger to try, I wish you success!

The voltage is not suitable for iphone5 to find an aftermarket replacement charger.

Screen touch failure while the phone is charging may protect the phone battery.

Hello! I've tried the same issue myself! It is caused by the mismatch of the charger (mainly caused by high voltage or excessive current fluctuation), just change to a good point or licensed charger!

If you find that the touch screen is not sensitive when charging, you can try replacing the charger and cable to see if that solves the problem. Because sometimes some copycat cables and chargers can cause some strange problems, and similar situations may occur with some chargers that are not original.

If it still doesn't work after replacement, you can try replacing a power strip or socket. Because sometimes the socket or plug-in board is unstable, which can lead to a similar situation.

If you have tried both of the above methods, you can also pound your iPhone directly to the computer to charge. If the touch screen doesn't work when charging on the computer, it means that the charger is a problem.

If there is no problem with the charging accessories and power supply above, you can also try to turn it off and on again.

You can also press and hold the home button and the power button at the same time for about 10 seconds to force your iPhone to restart and initialize the system.

1: There is a problem with the data cable. 2: The voltage is unstable. 3: Phone setting problem.

First, the cause of the failure: iPhone uses a capacitive screen, a major disadvantage of the capacitive screen is drift, when the ambient temperature, humidity changes, or the environmental electric field changes, it will cause the drift of the capacitive screen, resulting in inaccurate failure and other phenomena.

Second, the treatment method:

1. Forced shutdown: Press and hold the power (power button and power button) + home button at the same time, release the home button after the black screen appears, the white apple logo will appear within a few seconds after the home button is released, at this time the power button should not be released, wait until the white apple logo disappears and the screen is turned off to complete the shutdown.

2. Force Restart: Press and hold the power and home buttons of your iPhone at the same time and hold them for a few seconds, let go when a white apple appears on the phone screen. After that, the iPhone will automatically restart.

3. Sometimes if the iPhone encounters particularly cold weather, or the fingers are relatively dry, the so-called "touch screen failure" will occur. Please use it in a suitable temperature environment, and the fingers touching the screen should not be too wet or too dry.

4. It is also possible that the iPhone has been dropped before, and the screen may be broken, please go to the Apple retail store for help from after-sales personnel.

Your charger or cable is not original, which will cause this phenomenon! It is recommended that you change the charger.

Protective action prevents the voltage of the impulse from being unstable due to the power consumption during operation.

This is a common problem of iPhones, you take off the phone case and try it.

Because there will be a current when charging, the current will affect the touch accuracy of the screen, but this problem is generally ...... with a third-party charger

Your charger or cable is not original, which will cause this phenomenon! It is recommended that you change the charger.

1. It may be that there is a problem of static electricity around the phone, it is recommended to drain the battery of the mobile phone and then turn it off for a while.

2. It may be that the cable is loose, and it is recommended to send it to a repair shop for maintenance.

3. It may be a problem with the data cable and charging plug used by the mobile phone, it is recommended to use the original charger for charging.

4. It may be a problem with the mobile phone film, and it is recommended to tear off the mobile phone film.

If you have a static electricity problem, just remove the phone case.

It's a static electricity problem, and it's fine after going to the phone case.

No, check your phone or charger.

Cause: static electricity will be generated when the mobile phone is charging, especially if the mobile phone is a metal shell, the metal shell will absorb a part of the static electricity, because the shell and the screen are connected together, resulting in a change in the electric field of the screen, resulting in the screen failure during charging.

Here's how to fix it:

1. Method 1: First of all, you can use the electrostatic electrostatic shock screen in the lighter to change the electrostatic electric field, not all of which are applicable, but you must be cautious when using them.

3. If the above methods have no effect, you can try them all over and over again, but if it doesn't work, you should go to a mobile phone repair shop to change the screen.

The charger and charging cable do not match the phone and are not original.