Record the temperature inside the refrigerated truck, what should I use

Record the temperature in the refrigerated truck, using a temperature and humidity recorder.

The minimum refrigeration temperature of the refrigerated truck is -18, depending on what items are stored and transported, such as: the general seafood requirements are qualified for storage and transportation below -18 degrees after quick freezing, if it is fresh vegetables and fruits, etc., it should be in the range of less than 4 degrees and greater than 0 degrees, and the requirements are different. However, as a refrigerated truck, it needs to have a wide adjustment range to store and transport different items.

It can be adjusted between -30 and 10 degrees to adapt to different food storage and transportation requirements.

Only the correct use and operation of refrigerated trucks can ensure the intact delivery and preservation of goods;

Because refrigerated trucks are specially used for temperature-sensitive products, temperature assurance is the key to refrigerated trucks. If it is not used or handled properly, it will result in the goods not being stored or shipped in good condition.

The common types of chillers are as follows:

domestic Kaida; domestic Kaixue; Imported cold king; Imported Carrier units and others.

The refrigerated truck refrigeration unit originally has a temperature display switch, which is generally installed and fixed in the cab, and there is a temperature that needs to be set on it, and the current temperature. However, if you still want third-party recording data, you can install another temperature recorder, which is a temperature and humidity recorder used by general pharmaceutical companies to transport drugs or vaccines, and the cost ranges from 3,000 to 5,000. No, this kind of recorder is professional, for individuals, it is not practical, only the benevolent can see the benevolent, the wise see the wise.

put. A thermometer is placed inside the car, so you can see the temperature in real time. The specific requirements are as follows:

1. The refrigerated truck should be equipped with two sets of temperature recorders, one for use and one for backup, to record and transmit temperature, location and other data in real time.

2. The number of temperature measurement points installed in the compartment of the refrigerated truck shall not be less than 2. If the volume of the carriage exceeds 20m3, at least 1 temperature measurement point will be added for each additional 20m3, and if it is less than 20m3, it will be calculated as 20m3. Each refrigerator or incubator should be equipped with at least one temperature measurement point terminal to ensure the safety of the transportation of new coronavirus vaccine goods.

The temperature in the compartment should be automatically controlled, displayed in real time, automatically alarmed and automatically recorded.

Preparation of refrigerated trucks and equipment.

The carrier shall allocate appropriate refrigerated trucks, refrigerated containers or incubators and other equipment according to the characteristics of the new coronavirus vaccine cargo and the requirements of the transportation temperature, and the specific requirements are as follows:

The refrigerated truck should be equipped with 2 sets of temperature recorders, one for use and one for backup, to record and transmit temperature, location and other data in real time.

The number of temperature measuring points installed in the compartment of the refrigerated truck shall not be less than 2. If the volume of the carriage exceeds 20m3, at least 1 temperature measurement point will be added for each additional 20m3, and if it is less than 20m3, it will be calculated as 20m3. Each refrigerator or incubator should be equipped with at least one temperature measurement point terminal to ensure the safety of the transportation of new coronavirus vaccine goods.

The temperature in the compartment should be automatically controlled, displayed in real time, automatically alarmed and automatically recorded.

The refrigerated trucks for transporting new coronavirus vaccine goods should be dual-temperature controlled, and the cooling and heating power should be matched with the box.

Automatic temperature monitoring equipment, temperature measurement accuracy requirements within the range.

The verification, regular inspection, cleaning and maintenance of transportation facilities and equipment shall be the responsibility of a special person, and records and archives shall be established.

Refrigerated trucks should be disinfected regularly to avoid the spread of the new coronavirus through the cold chain.

The carrier shall establish or access an information system that can meet the requirements of drug traceability.

Jinan refrigerated truck manufacturers and sales manufacturers, welcome to consult!

The temperature of the refrigerated truck is determined according to the contents stored on the car, which is described as follows:

1. Before loading the goods, clean, disinfect and ventilate the inside of the refrigerated truck. Contamination of meat products by direct or indirect contact with truck surfaces without cleaning and disinfection; Some foods tend to absorb odors and need to be ventilated to try to avoid strong odors inside the truck.

2. Before loading the goods, the goods and the cargo hold must be pre-cooled. Refrigerated trucks are designed to be transported while maintaining the temperature at which the goods are loaded. Loading goods at high temperatures or high refrigerated temperatures may result in a deterioration in the quality of the goods.

3. Circulation of air conditioning in the cargo hold. The cargo hold should be kept at the same temperature, and it is important to pay attention to the space for the goods to be placed and not to be too full.

4. Fast entry and exit of goods. When the doors of a refrigerated truck are opened, the airflow from the outside causes the air inside the vehicle to lose and the temperature rises. The opening time should be kept as short as possible.

Nowadays, the requirements for refrigerated trucks are getting higher and higher, and some require transportation at different temperatures, so it is necessary to separate the spaces of different temperatures. Refrigerated truck double temperature plate will be your best choice, with our double fan, with temperature control (fan one positive and one reverse, temperature control set temperature) double temperature plate, only ordinary refrigerator can achieve freezing and refrigeration, can also be multi-temperature. Refrigerated truck double temperature plate, refrigerated truck large car strut, powerful fan, temperature control system, air supply cloth, refrigerated truck hardware.

The room temperature is 10 to 30 degrees, and the refrigerated truck is 2 to 8 degrees.

To choose a different unit, the freshness is minus 5 degrees. Freezing is minus 15 degrees Celsius.

The minimum temperature for refrigerated trucks is -18 degrees. Refrigerated trucks are classified as follows:

1. City distribution refrigerated trucks: generally tons, 2. Intercity distribution refrigerated trucks: 3-15 tons;

3. Long-distance distribution refrigerated trucks are generally large refrigerated trucks with tow heads: 10-20 tons;

There are many kinds of subdivisions, and the requirements of refrigerated trucks are different for different types of transportation goods.

Roughly: refrigerated trucks for fresh-keeping, generally with unfamiliar fruits, seafood, milk, etc.; Refrigerated trucks for refrigeration, general application and frozen product transportation; High-risk goods refrigerated trucks, banquet pants are generally used and chemical transportation; vaccine transport vehicles, which should generally be in place with the pharmaceutical system; Electronic components, refrigerated trucks, etc., subdivided into many varieties!

Refrigerated truck insulated envelope:

The refrigeration unit of the refrigerated truck is used for temperature control, and the function of the envelope is for temperature maintenance. If the refrigeration unit is the provider of energy, then the envelope is the storage of energy.

Among the three major components of the refrigerated truck, the refrigeration unit and the insulated envelope are the most important, and the removal of the chassis can be used as a small thermal insulation and refrigerated storage. The selection of the envelope generally follows several points: good thermal insulation performance, light weight, and not easy to damage.

Refrigerated truck refrigeration unit provides a steady stream of "cold" seepage blind important equipment for refrigerated truck containers, which are generally installed at the top of the front of the container, with an air-conditioner-like appearance, but has a stronger refrigeration capacity than the air conditioner of the same volume, and the choice of refrigerated truck refrigeration unit.

Generally, according to the volume of the refrigerated envelope and the temperature requirements of the transported goods, the cluster air-cooled units with different power refrigeration capacity are selected. <>