Is it possible that the mobile phone card is burned? The SIM card of the mobile phone is burned, wha

Updated on number 2024-05-11
8 answers
  1. Anonymous users2024-02-10

    In many cases, it's not that the card is burned, just say it, your SD card has a bad block, or the quality of the memory chip is not good, you need to use the software to regenerate it, and you can find the sdformatter on the Internet This regeneration software, the operation inside is very simple, you can do it OK by reading the instructions. There are professional organizations with SD abroad**, which also have this software. SD card no matter how to dial the small card next to it is useless,Always show SD write protection,Can't format,You can read the files inside,But you can't write or delete,If you're a U disk, it's very simple,Just find software mass production OK,But the card,Because the main control is on the card reader,Mass production is useless,Must be reformatted with special software。

    Choose fast when formatting, don't choose options such as overwriting or rewriting formatting, and then scan with easyrecover, 90% of important files can be retrieved as long as they have not been overwritten or rewritten, but your 15g scanning time may be a lot, a few hours is necessary, choose easyrecover when repairing the scan after formatting repair scan option. Good luck, I just helped a friend solve the same problem, and most of the information has been recovered, I hope it will be useful to you!

  2. Anonymous users2024-02-09

    Can't burn! It's okay to soak in water for a few days, thank you.

  3. Anonymous users2024-02-08

    Possibly, both SIM cards and SD cards may burn out.

  4. Anonymous users2024-02-07

    There is no possibility of RAM.

  5. Anonymous users2024-02-06

    SIM card for mobile phone.

    There is a problem with the production process, if there is a defect in the production, it will be easy to burn, and the mobile phone will cause the SIM card to burn the card due to unstable power supply, the easiest thing is that the contacts in the SIM card contact slot are crooked, resulting in the SIM card should not have a voltage position to be electrified.

    SIM card for mobile phone.

    If it's broken, you can bring your ID.

    Go to the business hall to reissue a new SIM card, the service requires the original mobile phone SIM card service password.

    If you have forgotten the original service password, you can provide the latest call history of the SIM card, recharge records, damaged SIM cards and other information blocking chain interest, and provide three correct ones to reset the password and replace the card.

  6. Anonymous users2024-02-05

    The mobile phone card is burned out, and the PUK code is entered many times in a row.

    Errors. Burning the card means that after the PUK code is entered incorrectly ten times, the SIM card.

    Permanently locked, the SIM card will be prompted to enter the PIN code before it is locked.

    There are three chances, if you make a mistake, you will be prompted to enter the PUK code, but there are only ten chances, if you enter them all wrong, then the phone card will be burned. There is still a way to solve the PIN code error, you can contact the corresponding business hall customer service to ask for the PUK code, if the PUK code is entered wrong ten times, then the card will be completely scrapped, if the mobile phone card is burned out, it is recommended to go to the business hall as soon as possible to re-handle. Key field.

    Reasons why the SIM card of the phone is broken:

    1. The software is broken: If the SIM card inserted is invalid, there is no signal, etc., it is generally a software problem.

    Solution: It is recommended to find a professional to check or replace the SIM card.

    2. The hardware is broken: If the mobile phone is inserted and turned on, it prompts "Please insert the SIM card", which is basically the hardware is broken.

    Solution: It is recommended to find a professional trouser for inspection or a new SIM card.

  7. Anonymous users2024-02-04

    It may be caused by the high temperature inside the phone.

  8. Anonymous users2024-02-03

    Summary. You can only get a new card. After the card is inserted into the mobile phone, it prompts "Please insert the SIM card", basically the hardware is broken, if it is other, such as the SIM card is invalid, there is no signal, etc., it is a software problem.

    If there is a hardware problem, it cannot be recovered, if it is software, it is recommended to go to the business hall to let them use special software, there is a certain possibility of recovery.

    There are many reasons for mobile phone card burning, such as unstable voltage, frequent power on/off, and repeated misuse of the mobile phone such as entering the wrong PUK code, which may lead to card burning. Prevent SIM SIM card from burning out:

    1) Don't let the mobile phone current be too large, such as using GPRS to surf the Internet, the mobile phone board will be very hot, and it will be even more hot while charging and playing.

    2) If you enter the PUK code many times in a row, the PUK will be locked ten times.

    What should I do if my mobile phone card is burned?

    Please wait a moment, I am doing my best to find an answer for you, please wait a moment.

    You can only get a new card. After the card is inserted into the mobile phone, it is prompted to "please insert the SIM card", the hail is basically the hardware is broken, if it is other touches, such as the SIM card is invalid, there is no signal, etc., it is a software problem. If there is a hardware problem, it can't be recovered, if the eraser is software, it is recommended to go to the business hall to let them use special software, there is a certain possibility of recovery.

    There are many reasons for mobile phone card burning, such as voltage instability, frequent power on/off, repeated wrong puk code and other behaviors that do not use mobile phones, which may lead to card burning. Prevent SIM phone card from burning out: Hail hole.

    1) Don't let the mobile phone current be too large, such as using GPRS to surf the Internet, the mobile phone board will be very hot, and it will be even more hot while charging and playing.

    2) If you enter the PUK code many times in a row, the PUK will be locked ten times.

Related questions
4 answers2024-05-11

A lot of people are looking for a teacher... I'm down here.

18 answers2024-05-11

If you are using a Huawei phone and the number of signal bars in the status bar is sometimes high or low, or the " " symbol appears on the signal bar, we recommend that you take the following methods to try to solve the problem: >>>More

9 answers2024-05-11

If there is no signal on your phone or an emergency call prompt is displayed on the screen, it is recommended: >>>More

12 answers2024-05-11

Hi! 1.Smartphones are just like computers, any incorrect operation and usage habits will cause the machine to react slowly; >>>More

7 answers2024-05-11

If there is no signal on your phone or an emergency call prompt is displayed on the screen, it is recommended: >>>More