Is Great Wall engine GW4C20 the same as 4C20

Hello, it is the same, the general factory name is 4C20, it is the most advanced in-cylinder direct injection gasoline engine independently developed by the Great Wall Company, mainly equipped with Haval H6 7 8 9 [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Same. The GW4C20 engine was developed by Great Wall in 2009.

On October 16, 2010, the medium-displacement gasoline direct injection supercharged model was officially ignited, using a 4-cylinder 16-valve design, through the fuel cylinder direct injection, exhaust gas turbocharging, intake and exhaust dual VVT, variable intake system, double side-mounted balance shaft, sodium-filled valve, timing tooth silent chain and many other latest technology engine, the maximum torque is 324Nm, the maximum power is 160kw.

At that time, compared with the traditional model, the power performance index was increased by more than 50%, the fuel consumption was reduced by 15%, and the emission met the European index, which could reach the Euro + standard.

Hello. Same. GW means Great Wall. I wish you a happy use of the car [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello car owner, this is the same [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

1. The power of the two engines of Great Wall Motors is different. The power of the Great Wall Motors GW4C20NT engine is more able to meet the more complex road conditions, the maximum horsepower of the engine is as high as 234 horsepower, while the maximum horsepower of the Great Wall 4C20NT engine is only 197 horsepower, so it is inferior to the Great Wall GW4C20NT engine in terms of power.

2. The fuel economy of the two engines of Great Wall Motors is different. The performance of the Great Wall engine GW4CT20NT in terms of fuel is not as good as that of the 4C20NT engine, and it is in a more fuel-consuming situation. The fuel economy of the 4C20NT engine is relatively good, and it is more fuel-efficient in daily use.

3. The exhaust bypass valve control device of the two engines of Great Wall Motors is different. The exhaust side of the Great Wall GW4C20NT engine is a motor control type, while the exhaust side of the Changshou leaky Jingcheng 4C20NT engine is controlled by a vacuum tank, and the performance is not as good as the Great Wall GW4C20NT engine, so the two engines are different in terms of control devices.

The main difference between GW4B15A and GW4N20 is that the engine displacement is not the same as that of the car. Other parameters are also different.

GW4B15L inline 4-cylinder turbocharged engine 135 kW 184 hp, 275 Nm. Si Huai Shi.

GW4N20A inline 4-cylinder turbocharged engine 175 kW, 238 hp, 385 Nm.

Summary. The differences are as follows: 1. The power is different:

The Great Wall GW4C20A engine has 110 horsepower, while the Great Wall GW4C206DCT engine has 140 horsepower. 2. The gearbox is different: the Great Wall GW4C20A engine is equipped with a 5-speed manual transmission, while the Great Wall GW4C206DCT engine is equipped with a 6-speed dual-clutch transmission, which can provide more flexible shifting operation.

3. Different fuel efficiency: the fuel efficiency of the Great Wall GW4C20A engine is, while the fuel efficiency of the Great Wall GW4C206DCT engine is more energy-saving and environmentally friendly. 4. **Different:

The Great Wall GW4C20A engine is much lower than the GW4C206DCT engine, which is also a big difference between the two engines.

The differences are as follows: 1. The power is different: the power of the Great Wall GW4C20A engine is 110 horsepower, while the power of the Great Wall GW4C206DCT engine is 140 horsepower.

2. Different gearboxes: The Great Wall GW4C20A engine is equipped with a 5-speed manual variable type gearbox, while the Great Wall GW4C206DCT engine is equipped with a 6-speed dual-clutch gearbox, which can provide more flexible transmission operation. 3. Fuel efficiency is different

The fuel efficiency of the Great Wall GW4C20A engine is, while the fuel efficiency of the Great Wall GW4C206DCT engine is more energy-saving and environmentally friendly. 4. **Different: The ** of the Great Wall GW4C20A engine is much lower than the GW4C206DCT engine, and the letter tape** is also a big difference between the two engines.

Thank you. Data expansion, the usual maintenance methods of automobile engines: 1. Use lubricating oil with appropriate quality level, not the higher the better.

The selection standard of automobile lubricant shall not be lower than the requirements specified by the manufacturer. European and American countries require that all automotive lubricants above SL must be used, and our country also has clear requirements for the use of Naminyou's level of engine oil, mainly depending on the suitable model for their own models. 2. Change the oil and filter element regularly according to a certain time and kilometers.

Regardless of the quality level of lubricating oil, the oil quality will change during use, in order to avoid the occurrence of failure, the lubricating oil should be replaced regularly in combination with the use of the vehicle. 3. Keep the crankcase well ventilated, and regularly remove the pollutants around the PCV valve. The crankcase is cleaned regularly, and during the operation of the engine, the oxides of high-pressure unburned gas, acid, moisture, sulfur and nitrogen in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, and mix with the metal powder produced by the wear of the parts to form sludge.

Therefore, the crankcase should be cleaned regularly to keep the inside of the engine clean. 4. Regularly clean the fuel system to control the generation of carbon deposits, so that the engine can be kept in the best condition. 5. Rust and scaling of the engine water tank are the most common problems.

Rust and scale can reduce coolant flow, reduce heat dissipation, and cause engine overheating or even engine damage. Therefore, it is necessary to clean the tank regularly to remove rust and scale from it.

The engine of GW4B15 is generally good, the mainstream engine is Mitsubishi 4G series engine, and some engines are independently developed by Great Wall Mitsubishi Heavy Industries Turbo. The home transportation is completely adequate and easy to maintain.

Great Wall Motor's inline four-cylinder turbocharged engine, codenamed GW4B15, is a completely new engine product. Compared with the engine codenamed GW4G15T that Great Wall Motors has already installed on the Haval H6 and Great Wall C50, this new engine has been greatly improved in terms of power output parameters.

Great Wall Motor's engine codenamed GW4B15 has a peak torque output of 280 Nm, which can output a peak torsional attitude moment at 1400 rpm. The torque output of this engine is more powerful than that of the Ford EcoBoost. It may be because the engine is tuned to pay too much attention to torque output, and it is inferior to Ford's engine in terms of maximum power and limb quietness parameters.

However, compared with the engine codenamed GW4G15T, it is still a big improvement. The engine will likely replace the GW4G15T engine, and with a new 7-speed dual-clutch transmission, it will become a new powertrain for the Haval H6 and Great Wall C50.

Engine model of Great Wall Haval H6:

gw4b15l、gw4b15d、gw4g15f、gw4b15a、gw4c20b、gw4n20、gw4b15d。The Haval H6 is powered by two engines, one turbocharged and the other turbocharged, mated to a 7-speed dual-clutch gearbox.

The turbocharged engine has a maximum power of 110 kW and a maximum torque of 210 Nm, with a maximum power speed of 5,600 rpm and a maximum torque speed of 1,800 to 4,400 rpm. The turbocharged engine has a maximum power of 145 kW and a maximum torque of 345 Nm, with a maximum power speed of 5500 rpm and a maximum torque speed of 2000 to 3200 rpm.

Take the Haval H62022 third-generation automatic two-wheel drive PLUS as an example: length, width and height: 4653 1886 1730mm, maximum power:

135kW, maximum torque: 275 Nm, horsepower L4 engine with 7-speed wet dual-clutch gearbox.

Summary. Depending on the make and model of the car, the distribution of the vehicles is also different, and the engines are also very different. The average car is 100 to 200 kg.

Or liter engine (including transmission cooling system) about 300 to 400 kg. Types of engines: Engines are divided into external combustion engines, internal combustion engines, gas turbines, and jet engines.

Technical characteristics of the engine: The driving mechanism of the engine valve adopts the hydraulic support roller rocker arm structure and some gasoline engines on the market now. The required driving force is relatively small, which can reduce the power consumption and fuel consumption of the engine to a certain extent, thereby effectively reducing the weight of the whole vehicle.

Characteristics of the car: 1The automobile engine is the device that provides power for the car, is the heart of the car, and determines the power, economy, stability and environmental protection of the car.

Common gasoline engines and diesel engines belong to reciprocating piston internal combustion engines, which convert the chemical energy of the fuel into the mechanical energy of piston movement and output power to the outside world. 2.Gasoline engines have the advantages of fast speed, light weight, low noise, easy starting, and low manufacturing costs.

Diesel engines have high compression ratios, high thermal efficiency, and better economic performance and emission performance than gasoline engines.

Dear, I'm glad to answer for you that the Great Wall 4C20 engine has 150 kg.

Depending on the make and model of the car, the distribution of the vehicles is also different, and the engine is also very different. The average car is 100 to 200 kg. Punch crack or liter engine (including gearbox cooling system) about 300 to 400 kg.

Types of engines: Engines are divided into external combustion engines, internal combustion engines, gas turbines, and jet engines. Technical characteristics of the engine:

The driving mechanism of the engine valve adopts a hydraulically supported roller rocker structure and some gasoline engines on the market today. The required driving force is relatively small, which can reduce the power consumption and fuel consumption of the engine to a certain extent, thereby effectively reducing the weight of the whole vehicle. Features of the car:

1.The automobile engine is the device that provides power for the car, and is the heart of the car, which determines the power, economy, stability and environmental protection of the car. Common gasoline engines and diesel engines belong to reciprocating piston internal combustion engines, which convert the chemical energy of the fuel into the mechanical energy of piston movement and output power to the outside world.

2.Gasoline engines have the advantages of fast speed, light weight, low noise, easy starting, and low manufacturing costs. Diesel engines have high compression ratios, high thermal efficiency, and better economic performance and emission performance than gasoline engines.