After the laptop is connected to CMCC, I need to re enter the IP address to use the wireless router

Generally speaking, private wireless routers can also be set to automatically assign IP (that is, change the DHCP setting of wireless routers to enable), so that when connecting wireless routers and CMCC-edu, you don't need to set IP addresses, which is more convenient.

The first way:

First, use a network cable to connect the network port of the laptop to the network port of the computer.

2. Enable local connection and wireless network connection in the notebook, after connecting the wireless CMCC through the wireless network connection, find the wireless network connection icon from the online neighbor, right-click - Properties - Advanced, allow other networks to connect to the Internet through this network - check - the system will prompt the local connection IP is automatically set to OK - OK.

3. Enable the local connection on the computer, and set the IP and DNS to be automatically obtained, you can access the Internet through the laptop, set it carefully, this will definitely work. The disadvantage is that the laptop must be turned on as a soft route, and the desktop can access the Internet.

The second way:

It is recommended to buy a wireless network card with RJ45 interface, the extension cable can be 30-50 meters, the longest can reach 100 meters, place the wireless network card on the outdoor roof or roof, and face the wifi hotspot, and transmit the received CMCC signal to the room with a network cable directly into the wired network port of the notebook, and then enter the ordinary wireless router** to the mobile phone, computer, notebook, and multiple devices can share a CMCC account at the same time, without cumulative timing, There have been many such success stories. You can **search on it: "WiFi wireless network card RJ45 interface network cable transmission can be connected to the router can receive CMCC" to take a look, the introduction is very detailed.

Are you a CMCC in a school dormitory?It was quite slow, and we reported to the mobile company that they were asking them to strengthen the signal, and then they seemed to have reinstalled the transmitter, but after graduation we don't know what the signal is now. The signal of chinanet and China Telecom is better.

I'm struggling with your question. CMCC is the use of Cisco program-controlled switches to send LAN wireless signals, do you want to convert wireless to wired? Receiving CMCC directly is the fastest, and it will be slower if you go through the route**.

The signal you said is not good, it may be that your wireless network card is interfered with or the quality is not good, it is recommended that you try it with an external wireless network card.

The wireless nodes (APs) can connect two wireless devices to each other through a bridge, but your device cannot.

Can I repeater (wireless relay) signal through TP-Link TL-WR702N 150M Mini Wireless Router

Connect wirelessly to CMCC to get a local verified address.

Use the dd repeater to connect to the cmcc to make a note of the ip assigned by dd and open the modified authentication address in ie.

The assigned ip)&ssid=cmcc&vlan=530 can be shared by all computers with only one number.

Hello, if you mean that your computer cannot successfully connect to the network when using the CMCC network, it is recommended that you first confirm whether your computer has retrieved the CMCC network, if you confirm that there is a network but cannot connect. You need to confirm the following two points: first, in addition to your computer, whether other terminals (such as mobile phones and pads) in the same place can log in to the CMCC network; Second, in addition to the CMCC network, can your computer log in to other wireless networks?

Corresponding to the confirmation result:

1. If other devices can use CMCC, please check the network settings of your computer, you need to choose to automatically obtain IP address, restart the device and try again.

2. If your computer cannot log in to other wireless networks, please check the wireless network card driver, reinstall and try again.

3. If all terminals cannot log in to the network, it means that the network information is weak or unstable.

Doesn't CMCC ask for user passwords? Mobile user passwords. Wireless connection will be limited, and then you need to open the network and enter your own registered user password to get on.

If you change the IP, it is equivalent to using someone else's computer IP, which will not only conflict but also illegally. You can change the IP back, log in to the network and enter the user password. If you can't connect, is your signal too weak?

Refers to where you would have been.

Do you have a mobile WLAN? Once connected, open a browser and enter your account password.

IP and DNS must be set to be acquired automatically

Hello, there are several possibilities that you can try to do if you can't pop up the login page:

1. Browser problems:

Try to use Internet Explorer and turn off the pop-up blocking feature. Open the browser, click the toolbar "Tools" at the top of the browser, select "Internet Options", click "Connection" - LAN Settings in turn, if the content under "Server" is ticked, it means that the network is set**, and removing both checks means canceling the network**. To use WLAN normally, you need to remove the two checks at the "server" to ensure that the browser is not in use.

2. IP issues:

It is recommended to obtain the IP address automatically. To check the IP, click in order: Start - Control Panel - Network and Sharing Center - Wi-Fi Connection - Details - IPv4 Address, or click the Wi-Fi icon in the lower right corner, select CMCC, right-click, and select Status to view the IPv4 address.

3. Other issues:

Use the authentication screen (portal screen) in your favorites. If you save the authentication screen (portal screen) that has been popped up in the browser and open it from the favorites the next time you use it, the authentication screen (portal screen) will not be displayed properly.

If none of the above methods can solve the problem, we recommend that you delete the original link and try again.

On the one hand, there is a problem with the signal, it is recommended to put the network card in an unobstructed place to ensure that the signal is good. On the other hand, check whether the computer system is normal, whether there are any collisions in the drivers, etc.