How high should the ambient temperature be during wallpaper construction?

During construction, the room temperature should be above 10 degrees. During construction and before drying, prevent sudden changes in wind and temperature.

Construction points. 1.Before construction, other processes should be completed to avoid pollution and surface damage.

2.For the wallpaper or other raw materials entering the site, the quality should be inspected to see if it meets the design requirements, and the same type of wallpaper should be used with the same batch number or the same production date.

3.Sticking all kinds of wallpaper should be according to the design regulations, and the corresponding adhesives should be selected, such as moisture-proof, mildew-proof, fireproof, moth-proof, etc.

4.The base surface of the adhesive should be dry, the moisture level of the concrete and plastered walls should be about 8%, and the wood plywood wall should be about 12%. For rooms with high humidity and often damp walls, materials such as wallpaper and adhesives with waterproof properties should be used during construction.

5.During construction, the room temperature should be above 10 degrees. During construction and before drying, prevent sudden changes in wind and temperature.

6.When pasting, there can only be a slice of the slice, not a horizontal seam of the joint.

7.For the wall and ceiling surface of the wood plywood, first flush the round nail cap into the wood surface, hit putty at the nail cap, and smooth the sandpaper after drying, so as to avoid the nail cap from directly contacting the adhesive and rusting and polluting the front of the wallpaper.

8.Some wallpapers, the thickness is too thin, and there is a phenomenon of penetrating the base surface. The base surface should be brushed with a base color or base oil similar to the color of the sticky wallpaper to ensure that the complexion is pure and does not lose its true color.

9.When adjusting the adhesive, there should not be any fine particles and impurities mixed in, otherwise the surface will not be smooth.

10.When the adhesive is blended, the wall and tissue paper base should be thinner, and the ceiling and thick base should be thickened, and treated as appropriate.

11.The wallpaper that does not match the flowers, should be marked with the number in the same direction, and pasted in order to avoid the color difference of the wallpaper by light refraction.

12.The wallpaper should be glued parallel to the main window to avoid light refraction.

13.When the adhesive-backed wallpaper is attached to the ceiling, in order to increase adhesion, an appropriate amount of adhesive should also be brushed on the paper.

14.When gluing with the knife drawing method, the knife edge cannot be repeated, otherwise the paper seam is difficult to tighten.

15.In the room that is being pasted or has just been pasted, the window should not be opened, so as not to cause excessive air flow and temperature difference to open the wallpaper.

Spring is a good season for decoration, but there are also many people who put the decoration in the summer, for the summer decoration of consumers, we will give you a few special suggestions today, so that you can be successfully completed in this season, so as not to leave regrets in the future.

Wallpaper and paint should be dried naturally: Paint and wallpaper are commonly used decorative wall materials. In the spring, because the air is humid, the doors and windows are opened to ventilate in order to dry the walls as quickly as possible.

Summer is different, because it is dry, so the wallpaper is generally soaked in water before paving, and then brushed with glue to pave. If you open the doors and windows at this time, let the freshly laid wallpaper blow "through the hall", the wallpaper will shrink and deform due to rapid water loss.

Be sure to remove the musty smell: In home decoration, it is common to encounter the problem that latex paint will dry slowly and become moldy and smelly in hot flashes. In this regard, the general method of decoration companies is to turn on the air conditioner to dehumidify and extract the moisture in the air; Furniture cabinet doors are not closed to keep ventilation.

After decoration, there will also be a variety of odors that cannot be dispersed, affecting people's health. The suggestion of the decoration company is to put more green plants after the decoration, or put two or three lemons or oranges and bananas in the room, which can achieve a quick deodorization effect.

Don't paint on rainy days: Experts recommend that when painting varnish or mixing oil on wood products, remember not to paint them on rainy days. On rainy days, ask the construction team to do some other work first, or even temporarily suspend work for two days, and don't do paint work on rainy days.

Room temperature! I can stick in Foshan for more than 30 degrees! In Hefei, you can also stick a few degrees! However, it is best not to open the doors and windows for ten days or eight days after sticking! The glue dries too fast, it's not good!

People ask you what the temperature is, as for it? No less than 0 degrees is fine. Dry slower at most.

There is no clear requirement for how many degrees are suitable for wallpaper, but wallpaper needs to take into account the ambient temperature, and it is suitable for pasting wallpaper in the season when the temperature will not change drastically.

Before construction, the relative humidity of the air should be below 85%, and the temperature should not change drastically, and it is necessary to avoid construction in the humid season and on the wet wall. During construction, doors and windows should be opened during the day to maintain ventilation; Close doors and windows at night to prevent moisture from entering. The wallpaper that has just been pasted on the wall is forbidden to blow violently, which will affect its bonding fastness and surface engineering.

The cut wallpaper can only be pasted after being wetted, generally soaked in clean water, and placed for 10 minutes to brush the glue. Brushing glue is also a key part of wallpaper paste, requiring the glue to be evenly and tightly, not missing brushes, and paying attention not to wrap and pile up to prevent staining the wallpaper. After the back of the wallpaper is brushed, the glue surface and the glue surface should be placed on top of each other, which can not only prevent the glue surface from drying out quickly, but also prevent the paper from being polluted, and at the same time facilitate the pasting operation.

If the indoor temperature is greater than 10 degrees Celsius, the wallpaper should be dried naturally and the indoor humidity should be maintained. Do not turn on the air conditioner or open doors and windows for ventilation. In order to avoid the wallpaper drying too quickly and too quickly, it is easy to cause the wallpaper to open the glue or shrink the joint. Wait 2-3 days for the wallpaper to dry completely before opening the doors and windows for ventilation.