How should the basketball hoop be maintained and maintained?

Basketball hoop use and maintenance methods:

Before the basketball hoop is installed, the field should be put out, and it is best to draw the line of the basketball court before installation.

The standard basketball hoop, the height of the hoop from the ground is 3050mm, the rebound is 2900mm from the ground, and the distance between the rebound and the bottom line is 1200mm. Here we mainly explain the installation of buried basketball hoops.

The main place to pay attention to the buried basketball stand is the location of the buried pit, before the hole, you need to know how much the arm length of the basketball rack is, take the most commonly installed round tube basketball stand in our company as an example, the arm length of the basketball stand is 1800, the distance from the bottom line to the column is 600, the width of the hole we require is 700mm*700mm, the depth is 800mm, the point that needs to be explained here is the depth of the hole, because the distance from the basket to the ground is 3050mm, when installed, Use a rope to put on the hoop, the length of the rope is just 3050mm, and the depth of the basketball hoop buried in the pit should be just enough for the rope to touch the ground. The distance between the pit and the bottom line is 350mm.

After the basketball hoop is put into the pit and the position is determined, the pit is filled with concrete, and within three days, it is not allowed to be used, and the rebound generally has 2-4 connecting rods, which are mainly used to adjust the angle of the rebounding and stabilize the rebounding.

For the special installation position of some basketball hoops, such as the roof or garage roof, we can also use embedded bolts to bury the flange in the pit and fill it, and then connect the bottom of the basketball hoop with the embedded parts.

The embedded parts of the basketball stand are not less than 400mm 400mm, buried 1 meter, the embedded parts should have a certain corrosion resistance, anti-acid, anti-alkali function, the upper and lower fixing of the embedded parts has firmness and insurance, and the fasteners and screws are treated with hot-dip galvanizing.

Chapter 3 Maintenance of Basketball Hoops.

Indoor basketball hoop because you don't have to worry about wind and rain, steel is not easy to rust, but there are also disadvantages, due to the lack of natural flushing of rainwater, after a long time, the backboard is easy to dirty, use a longer mop to clean.

Outdoor basketball hoop steel long-term exposure, once the paint off, the steel is easy to rust, such as found that the paint surface is broken, should be repaired in time, once found that the basketball hoop is seriously corroded, perforation and other phenomena, should be immediately stopped.

Rebounds cannot be broken under normal use, and it is forbidden to hit the rebounds with objects such as masonry and stone.

1. Regular inspection: The most basic work for the maintenance of basketball stand manufacturers is regular inspection. 2. Long-term use of the basketball stand will produce dirt and other impurities, and the basketball stand should be cleaned regularly.

3. The rational use of basketball stand manufacturers' products is also part of the maintenance and maintenance of basketball stands. You can find out from Nanfang Hongda that the basketball hoops we purchased here are all theirs.

The main thing is to clean it daily, and if it is found to be damaged, it should be repaired in time.

Paint and wax and wipe clean.

Equipment, like people, can get tired. But people are alive and know how to self-regulate. Things are dead, so they need human maintenance to maintain normal use for a long time.

Due to the long-term leakage of the outdoor basketball hoop, the steel is easy to rust, and if it is not repaired in time, there will be perforation in the case of serious corrosion.

The texture of the basketball hoop is not firm, and it is very dangerous during use, especially some elementary school students, who like to climb the basketball hoop. If such a phenomenon is discovered, the use of the ball frame should be stopped.

Mild detergents should be used during the cleaning of the surface of the ball rack. so as not to damage the surface of the ball frame. When buying a basketball stand, we must pay attention to quality and after-sales service, and the company should take corresponding measures in a timely manner for the opinions and information of customer reactions, and have relevant personnel to conduct quality tracking and return visits to the use effect.

It is necessary to conduct regular physical examinations on the basketball hoop, so it is necessary to check at least once a month to check whether the frame has paint off, whether there is rust, whether there are perforations, and if so, it is necessary to repair and anti-corrosion treatment in time.

Among them, the welding part is the most susceptible to decay, if there is looseness or decay, contact the manufacturer for maintenance and repair.

The basketball hoop is easy to break down during use, and it is necessary to prohibit the use of bricks and other objects to hit the rebound. The same goes for hoops, where the rebound is the most vulnerable part of the rack.

If it is found that the hoop is tilted or broken, the basketball hoop should be enclosed, forbidden to be used, and the manufacturer should be contacted for maintenance or replacement.

Basketball hoop is a very popular sports equipment, many people benefit from its simple and practical effect, but also very worried about the harm caused by its improper operation or disrepair, in fact, the basketball hoop also needs maintenance. Routine maintenance and maintenance of the basketball hoop can prolong the life of the basketball hoop, while also avoiding the normal use of the product. The most basic work of the maintenance of the basketball hoop is to check it regularly, check the degree of rust and firmness of the connection and welding parts twice a year, check whether the frame has paint off, whether there is rust, and check whether there are holes.

Once the paint peels off, it should be repaired in time, otherwise it will cause the steel of the basketball hoop to rust, corrode seriously, and eventually perforate. The rusty and perforated parts should be repaired and anti-corrosion, among which the welded part is the most prone to decay, if there is looseness or decay, contact the manufacturer for maintenance and repair in time. The reasonable use of the basketball stand is also part of the maintenance of the basketball stand, in which the rebound is the most vulnerable part of the stand, which is easy to be broken down in the process of use, and it must be forbidden to use bricks and other objects to hit the rebound.

The same applies to hoops, which are not spring-loaded hoops and are not allowed to be slammed if they are found to be tilted or broken. The basketball hoop should be enclosed, forbidden to be used, and the manufacturer should be contacted for maintenance or replacement. Long-term use of the basketball hoop will produce dirt and other impurities, the basketball hoop should be cleaned regularly, and neutral detergents should be used in the process of cleaning the surface of the hoop to avoid damaging the surface of the hoop.

Compared with the outdoor basketball hoop, the main maintenance work of the indoor basketball hoop is cleaning, because the lack of natural clarity of rainwater makes the rebound easy to get dirty when used for a long time, so it needs to have corresponding cleaning measures.

Maintenance method Check the connection twice a year, the degree of corrosion and firmness of the welding part, and find that abnormal phenomena such as loosening and rust should be repaired and anti-corrosion treatment in time. Neutral detergent should be used to clean the surface of the ball frame to avoid damaging the surface of the ball frame.

Outdoor basketball hoops, indoor basketball hoop maintenance tips.

Tell you how to maintain a basketball hoop?

1. Indoor basketball hoops do not have to worry about wind and rain, and the steel is not easy to rust, but Min Zihui also has disadvantages, due to the lack of natural flushing of rainwater, after a long time, the backboard is easy to be dirty, and it can be cleaned with a longer mop.

2. The steel of the outdoor basketball stand is exposed to the outside for a long time, once the paint is off, the steel is easy to rust, if the paint surface is broken, it should be repaired in time, once the basketball stand is found to be seriously corroded, and the phenomenon of bridge perforation should be stopped immediately.

3. Tempered glass rebounds will not be broken under normal use, and it must be forbidden to use masonry and other objects to hit the rebounds.

The main factor affecting the life of the basketball stand is the painting process, because the main material of the basketball stand is steel, which is exposed to the wind and sun, and once it rusts, it will affect its strength, and then affect the life of the basketball stand. Painting process is an important factor in the purchase of basketball hoops. Some small factories don't even do the most basic rust removal process, and paint directly, just looking good.

Our company's basketball hoops are all painted with baking process, which can be said to be the best armor of the basketball hoop. Basketball hoop paint is a high-performance special material, combined with heat resistance, chemical inertness and excellent insulation stability and low friction, with other coatings can not compete with the comprehensive advantages, its application flexibility makes it can be used on almost all shapes and sizes of products, non-stick, heat resistance, sliding, moisture resistance, wear resistance, corrosion resistance and other properties. The quality of the painted basketball hoop can be guaranteed for more than 5 years!

The baking paint of the basketball hoop refers to the semi-finished basketball hoop coated with high-performance paint and put it into the baking room at 300-400 degrees for high temperature baking, so that the powder in the high-performance coating is fully dissolved in the baking paint, and the process of baking the paint for 24 hours is completed!

Family affection in the poem? Nostalgia in the poem.

Basketball stand installation and maintenance requirements, you should be careful when installing the basketball stand to avoid injury. The installation sequence of the box basket of the basketball stand, the box, the draft column, the probe arm, the back lever, the rebound, the basket, the upper lever, the lower drop key to rent the rod, and add the counterweight. When the tempered glass backboard of the basketball stand is installed, the five connected regret points must be on a plane, the five points should be evenly stressed, the probe arm, the rebound, and the hoop should be in a line, and the probe arm and hoop are strictly forbidden to contact with the glass rebound.

After the composite FRP backboard is installed, the connection point should be sealed with glass glue to avoid damage to the blue board due to rainwater. Maintenance of basketball hoops:

1.The basketball hoop is inspected twice a year for the degree of corrosion and firmness of the welded parts. If it is found that abnormal phenomena such as loosening and rust should be repaired and anti-corrosion treatment should be carried out in time. to ensure the stability of the basketball hoop.

2.Neutral detergents should be used to clean the surface of the basketball hoop to avoid damaging the plastic powder surface of the basketball hoop.