-
I will teach you a very simple method: it is to use the reference object to judge, for example, when the car is about to approach, you don't have to look back, on the contrary, you can look at the front of the car and use the reference object in front to judge. For example, the road ahead, the house, the two piles in front, etc.
In fact, when you are about to approach the library, it is enough to look at the three mirrors in front of you. Everyone's thinking is different, and the habit of driving is also different, which depends on your own practice, which is the so-called proficiency, practice a few more times I believe you can practice very well.
-
You put a conspicuous tape or a small sticker in the middle under the rear glass or something, and then look at that reversing car and sex, that's how I got it when I was learning to drive
Hope it helps.
-
When looking at the reversing mirror, the car is in the big phase when the front center bar and the rear center bar are on a line, and the car is positive, which means that the direction is going to be right at this time! And you look a little farther ahead! I judged it for myself! Just practice a few more times!
-
Hello friends, I just learned the car this year, just after the road test on March 31, I can get the car book in a few days, and I learned the inverted rod in February, and I also encountered the situation you said, and I saw whether the car was correct The best way is to look at the rear of the car, as long as the rear of the car is flat, the car is right, and the reincarnation is reversed.
-
The method of correct reversing for novices is as follows: 1. Confirm safety. For novices, the first step is to confirm whether the back of the car is safe, if you are not sure whether it is safe in the car, you can get out of the car to check, confirm the safety and then prepare to reverse, if there is someone next to you it is better to let others help to take a look.
2. Correct posture. A good driving posture is important for safe driving, and it is also important to have a correct posture when reversing. When looking at the rear window, hold the upper part of the steering wheel with your left hand and look sideways at a wide angle.
If you are reversing from the side, hold the steering wheel with your right hand and your head slightly extended. 3. The speed should be slow. The speed when reversing must be well controlled, must not step on the accelerator pedal, for novices, you can control the clutch with your left foot, keep the semi-clutch state, and put your right foot on the brake pedal, ready to brake at any time.
-
As for the improper reversing, this is not busy, when you have kilometer experience, you can solve it, practice makes perfect! There are no shortcuts to speak of, and individuals have experience, but when it is said to you, it is not clear, and you may not be able to do it. The only way is to practice the true knowledge, everyone has this process, there is no need to rush.
As for shifting gears, it's learned. There may be two reasons, one by one;
First, the key to shifting gears is to release the clutch to "two fast, two slow and one pause". It is important to note this "pause". What does that mean?
Just in the clutch's empty stroke and free stroke, it should be released quickly, slow down in the initial linkage and full linkage, and be sure to pause a little in the semi-linkage! Because before and after shifting, the engine speed should rise and fall for up to 1000 rpm, if it does not stop, there will be a shock to the engine, and people will feel that the car is taken by the engine! The two slows are not infinitely slow, they are just a little slower.
Driving, even veterans have to have this process, pay attention to the "pause", and grasp the key to the oil separation. Let's take a closer look.
Second, if you shift gears at the appropriate speed (engine speed), the impact on the engine will be minimized. This speed (Beverly) is 20, shift to 2nd gear, 40 to 3rd gear, 55 to 4th gear, 75 to 5th gear. The engine speed is:
2000-2200 shifts the second gear, and the others are all 2500 shifts.
As long as you experience the "two fast, two slow and one pause", and then change gears according to the speed of the car or engine speed, you will not be frustrated.
I wish you a speedy skill.
-
In the first step, we park the vehicle in the designated area and then reverse gear. At this point, look in the left rearview mirror. When we see the line on the left side of the lower edge of the left mirror, this is the sweet spot where the steering wheel hits to the right.
-
How do novices reverse?
1. Before reversing, first see the situation behind the car, estimate the route of reversing, determine whether the front of the car will hit obstacles, try not to step on the accelerator when reversing, and control the speed not too fast.
2. According to the needs of the rear direction of travel, turn the steering wheel with the left hand: if the rear of the car needs to travel to the right rear, turn the steering wheel to the right; Otherwise, turn the steering wheel to the left. According to the Anji Driving School, this is actually the same as the steering of the car when driving forward, and remembering this point will not lead to the wrong direction and be in a hurry.
3. Novices should not keep looking at the back of the car when reversing, and on the premise of confirming the safety of the rear of the car, they need to observe the left and right rearview mirrors from time to time, pay attention to the distance between the obstacle and the body, and use the steering wheel to correct the position of the body when it is retreating.
4. If you feel that the front of the car may hit an obstacle during the reversing process, you also need to look at the front of the car at the appropriate time. Especially in the case of a large rotation amplitude of the steering wheel, because the turning radius of the steering wheel is greater than the turning radius of the rear wheel during the steering process, and the head of the car is thrown outward when reversing, so it is necessary to pay attention to the front of the car to avoid rubbing.
-
When learning to drive, follow the steps of the coach, don't listen to others, others will be chaotic, and you will realize it after a long time.
-
Tips for reversing.
1 Although the car is rearing backwards, the eyes should be looked forward, especially for novices. This is because driving schools don't usually teach these practical knowledge. If you don't pay attention to the front of the car when reversing, it is very likely that things will rub on both sides of the front of the car, and it will be even more troublesome to step on people.
When reversing to the left, pay attention to the right front of the car, and when reversing to the right, pay attention to the left front of the car. I often see scratches on both ends of the car, but I don't pay attention to this one.
2 If the place is cramped and there are obstacles on both sides of the car (such as parked cars), when reversing to the left, try to make the body stick to the left, and vice versa, so that you can turn the handlebar in advance and shorten the reversing distance. How to paste it, you can pour it straight first, and then go up, stick it left or right when you go up, and then pour it again.
3. Observe the terrain before reversing, and when driving in the parking place, you should pay attention to whether there are obstacles around the vacant space. Novices often do not pay attention, after driving down, in case there is a low pile or a child behind the car may step on the safety gear or hit someone, although the probability is small, must not be prevented. For the sake of convenience, some people don't want to reverse into the warehouse and wait, so they are willing to plunge into it, so don't you have to pour it when you come out.
I've always been head-out, bitter first and then sweet.
4 If someone is with the car, you can help command, remember to roll down the window, otherwise the people outside will shout in their throats, and you won't hear it, especially the novice is easy to panic and can't take care of it, and the sound through the window may not be heard. Another benefit of rolling down the windows is that you can stick your head out and look if you can't see what's going on on the ground.
5 If the place is not spacious, you don't need to reverse too much, just walk in front of you. After all, it is a little more difficult to go backward than forward, and the risk factor is a little higher.
6 When the old land parking car is reversed, it is just the opposite, the more you reverse when you reverse, and the more you go up when you go forward, the easier it is to park the car, especially the parking space with a small distance should be operated in this way, otherwise you may not be able to park at all. This is used with caution by novices, and it is used by intermediate drivers to improve their skills.
7 When parking and reversing, the angle of entry is about 40 degrees to enter, in the past right backward as an example, the timing of entering the left direction is very important, pay attention to the front of the car, feel that the front of the car can pass (that is, the front of the car will not step on the front car when the right throw), you can play the direction. In my experience, the rear of the car is usually the back third of the parking space. If you hit the direction too late, there is not enough space in the back, and the body may be too far to the right, and if the right side is a wall, it will be topped; If you play too early, the body may still be outside, and you will have to move it several times before you can get into place, and novices may not be able to move it at all.
When reversing and parking, the timing of the cut angle and the wheel is very important. This article is based on experience and field conditions, and it is extremely challenging, and novices should have the courage to practice more. I've practiced many times in our community, and I feel a great sense of accomplishment.
8 Finally, an important lesson, don't play the wheels on the spot, damage the car, and sink the boost. If you need to move the car a few times, pay attention to the completion of each up and down action, when the car will stop and not stop, return a wheel in the opposite direction, how big can you play, so that your next action will save so much, its practical significance is to shorten the time when turning around, save effort and space when moving the car, we should learn more and develop habits.
-
Looking at the mirror reversing is the most formal way to make a fuss, but also to pave the way for the future to develop good driving habits, you must have a reference when reversing, if the direction is off then the liquid belt did not hit it, human instinct will make you know how to pour, where to pour, in fact, reversing is not difficult, more skilled on OK.
-
No, the general master has two ways to reverse, one is to look at the back, and there is a mirror to pour, when the sleepy look at the mirror down, pay close attention to the left and right distance of the poles on both sides, the wheel is scattered or see the front of the car is right, the ruler can fall down directly.
1 Gear increase requires one gear at a time, and no gear downshift is required. 1 can't go straight to 4, but 5 can go straight to 1 >>>More
Haha, it seems that you are quite diligent in your studies! >>>More
Hehe, first of all, don't be nervous, have a good mentality, how big is it to learn to drive and get a driver's license?! It's only the second day of learning to drive, and I definitely don't feel it, I have never held the steering wheel, and I have never stepped on the clutch, of course, I am not familiar with it. You have to let go, open more and you will naturally be proficient, the coach sits next to him anyway, if there is a problem, he will step on the brakes in time, don't be afraid, let go, ask the coach if you have a problem. >>>More
What should I do if I have a poor sense of direction? Today I will teach you a few basic principles, simple and practical.
Turning the steering wheel in a counterclockwise or clockwise direction to the bottom is called a steering wheel kill. It is used for automobiles and other vehicles for short distances, so that vehicles can complete large steering actions with a small moving distance. >>>More