-
Turn off the mobile phone, and press and hold the plus button + power button of the volume at the same time Volume plus key + home button + power button Don't let go, release the button after the screen lights up, at this time the phone will enter an all-English interface, referred to as recovery mode.
Use the volume up and down keys to select the first one: wipe data factory reset (wipe data, factory reset) press the power button or home button to confirm the selection, and find the yes option to confirm. Then select wipe cache partition (clear the user's data cache and software cache), and also select yes, (note that the 2 steps cannot be saved, otherwise there will be problems in the flashing process).
After performing the above operations, all third-party software installed on the phone will be erased, and the data will also be erased. Then select Install Zip from SDCARD, confirm your selection, and the flash will start automatically.
Pay attention to the flashing process do not do any operation on the phone, before flashing the phone to keep the power sufficient, at least over 50%, it is best to be full, to prevent the flashing process from happening accidentally. After brushing, it will return to the recovery interface, select the first reboot system now (restart the phone), at this time the flashing is over, due to the new system, the first boot time is longer, and it will be good later.
-
Dear Hisense users, hello!
It is very important to read the instructions carefully and follow the upgrade instructions!
There are activities in the smartphone section, and there are surprises in attendance
-
Posted on 2016-10-24 14:58[ color][ url][ size].
**Author is banned or deleted Content is automatically blocked **quote].
hahahahahahahahahahahahaahhahahahahahahaaahahha
-
I recommend you give it a try.
Brush Master and Bell Pepper Brush Machine.
The ROM package of these two software is relatively complete.
Or search directly in the ROM base and ROM home.
-
These miscellaneous machines do not have a brush package, and now the brand machine is not expensive, so you can consider it.
-
Hello !
According to your description, the Hisense E51-M phone wants factory reset
We recommend that you try it by following these steps:
When the device is fully charged, after backing up data, press and hold the [Power Button] and [Volume +] buttons for 10 seconds with the device off (off).
After entering recovery mode, move the cursor with [Volume+], Volume-] (see figure below).
Operate 2-wipes again
Select Wipe Data Factory Reset > yes, home] to confirm.
Select wipe cache partition > yes , home] to confirm.
Select reboot system now > yes , home] to confirm.
After doing so, restart and you're done.
Hope this helps you!!
-
The password is set by yourself, the phone itself does not have a password, if you forget it, you don't want to lose the data, take the ID card to the after-sales unlock.
-
Hello !
Your HiSense E51-M phone wants to be rooted
Hope this helps you!!
-
There are too many things in the memory, not enough memory, or the mobile phone version is too low. If the memory is not enough, you can use a pea pod to move the things that are installed in the memory to the SD card, and if you can't move it, you can delete some games that are not often played.
-
The all-in-one machine can't be taken up, and when you open it after the sale, you can't use the battery If the battery is damaged, it's easy to explode.
Unlocking is a must. If you need to flash your phone, leave an email to send you the Huawei C8812E smart flashing tool, the tool set unlocks (unlock code according to the link in the tutorial to apply), root, flash into the third-party recovery in one, as long as you follow the tutorial, the operation is very simple. You just want to remove the built-in software, just perform unlocking (unlock code required), root and you're good to go.
Khan
You're all copying all these things? >>>More
Eh, I have a package that can be verified to use!
The so-called flashing,It is to change the system、ROM or root of your mobile phone,Simply put,If you brush Android,Then your phone is Android after flashing。 No additional installation is required. >>>More
There are two types of lattice machines: hard and soft.
1) Soft grid machine: divided into two types of sequential input * under the standby screen, after which the phone is displayed to factory settings, and you are asked to enter the lock code, the initial password is: 12345, if you have changed the phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed After a few minutes, the grid machine will be completed in the order of entering * under the standby screen, restore factory settings, and also need to enter the initial password: >>>More