Internet speed issues on several computers. How much internet speed do 10 computers use

Brother, let me tell you, that friend of yours used a network traffic limiting tool to throttle your internet speed, such as P2P Terminator. You can go to the search to find out the specific function, control the traffic of the machine in the local area network, for example, limit the traffic of your machine to only 30kbm.

Give it a try.

Let's see if there's any thunderbolt, electric donkey. PPS. QQ**Ah.

In short, if all the applications are turned off, it is still so slow, which means that there is a virus.

You must have used a router with 3 computers! You can set it up from the router!

You give it to your friends! Maybe he's in the router!

You can go into the router to restrict him!

It's impossible to occupy Got it.

It's like a road, four people walking, one person walking three people's road, and the other three are on a jumping road

He can set the acceleration of your next PSP, etc., but he can't control the network of those ones, you know.

Summary. The solution to the slow computer network speed is as follows: 1. The first is to modify the settings, change the setting of the network speed in the computer to the optimal choice, the method is to right-click the network on the desktop, enter the properties, configuration, advanced, connection speed and duplex mode to adjust to the automatic detection will be modified to the maximum, and then after the determination, the network speed can be maximized.

2. The second is to check whether the router at home is set up correctly, because some laptops will use the wiif network connection, if the network speed is slow, it may be that there are more people connected to the router, or someone is using the network to limit the network speed of other connected devices, you can improve the network speed of the computer.

Hello, dear, for you to find: 10 computers with 100 megabytes of network speed.

The solution to the slow computer network speed is as follows: 1. The first is to modify the settings, change the setting of the network speed in the computer to the optimal choice, the method is to right-click the network on the desktop, enter the properties, configuration, advanced, connection speed and duplex mode adjustment to the automatic detection will be modified to the maximum, and then make sure that after the operation, the network speed can be maximized. 2. The second is to check whether the router at home is set up correctly, because some laptops will use the wiif network connection, if the network speed is slow, it may be that there are more people connected to the router, or someone is using the network to carry out **, the network speed of other connected devices is limited, and the network speed of Xiangliang can be improved by Xiangliang.

If you use it at the same time, it's about 1 in 10, and if you only use one computer, it's about 90%.

10m fiber is sufficient. Set the upstream and downstream routes in the route.

Limit. You can limit each client, such as a maximum of 1 m downlink and 512k uplink. The speed of 2M is equivalent to an exclusive bandwidth of 8M. The ADSL of the family may not be able to reach a downlink speed of 1m.

There is also binding MAC address and IP address, so that you can better prevent virus attacks.

The switch must be in gigabits, and hundreds of gigabytes are not enough.

The theoretical switching speed of a 100 Gigabit switch is 100 Mbps, and the actual transmission capacity is about 11 Mb S. This is not a big problem for the average home user. Gigabit switches are 10 times more and backward compatible with 100M and 10M products.

Gigabit switching speed is faster, if there are two Gigabit network card users at full speed at the same time, the 100 Gigabit switch can only use about 5 Mb s per person, while the Gigabit switch can transmit 10 Mb s per person.

A computer's network card can be either 100 Gigabit or Gigabit.

If there are different transmission rates at both ends of the network cable, the adaptation is the lower one, so the selection of network cards and switches should match. The peak transfer speed of a 100 Gigabit network card is 100 Mb s, which is basically the same as Gigabit if used by one person, but if it is used with multiple people, it is faster than a Gigabit network card with 100 Gigabit.

I opened an Internet café in 2007, 10m is enough, but your computer configuration can't be too low, and now it's enough to play online games at about 4,000. Then you have to change the 1000m switch, such as your switch is 100m, m, your network card is 100m, it is not the right way, or it is the same together, in order to start the speed and coexist, all 100m. It is enough to use a rapid speed of 10m with a light drill (now the general light drill is about 10m **1500, which is generally based on the county and city's own positioning**).

Of course, the faster the Internet speed, the better. Now fiber to the home, the speed can reach more than 100m, because the computer is actually not possible to access the Internet at the same time, so each computer can actually reach a speed of more than 10m, which can fully meet the general needs. However, the actual network speed of the computer is also limited by the speed of the computer and the number of users, so the speed of accessing each is not the same, some are easy to log in, and some are more difficult to log in.

Secure computing should be a gigabit network speed that uses fiber optics directly. Otherwise, it is not enough to open an Internet café at a fast speed. The speed of online games can't keep up.

If you want to change the diskless system, you have to change the gigabit switch and network card, and add broadband if you continue to have disks.

It's not for any reason, that's it, because the units are different, there are MB and MB, and the units of the two are not the same.

It has nothing to do with the need for the best light 1,000 2m can also be slow , the financial problem is still to use the community to treat it 4m should be.