Where is the waste engine oil, where to recycle the waste engine oil of the car?

The secret to turning used motor oil into a release agent.

Super release agent core masterbatch + waste engine oil + water + instant acid and alkali resistance transparent thickening.

Powder + Drawing Powder + Preservative + Flavor + Pigment = Release Agent.

The core masterbatch of super release agent is the core masterbatch specially developed by Chengdu Hengfeng Hongye Detergent Factory for the production of release agent, which has the following characteristics:

1. Special Features.

1. It can dissolve waste engine oil, engine oil, lubricating oil and other industrial oils and water in a few seconds.

2. It does not contain toxic solvents, alkaline, environmental protection, alkali resistance and hard water resistance.

Second, the production ratio:

Waste engine oil 10% + super release agent core masterbatch 2% + water 88% + instant acid and alkali resistant transparent thickening powder 500 grams + drawing powder 80 grams + pigment 1 gram + preservative, flavor appropriate amount = release agent, you can adjust the proportion according to the needs of cost and quality.

3. Production process:

First add the preservative to the water and stir, then add the core masterbatch of the super release agent to the water and stir, soak for one hour and then stir evenly to ensure that it is completely dissolved, and then add the waste engine oil and flavor pigment to the water and stir, and finally add the instant acid-alkali resistant transparent thickening powder and drawing powder to the water and stir, and stir the spoon after about half an hour of thickening.

Car repair shops, give enough money, you have as much as you want.

3 allIt can be sold to 4S stores.

If you dump the used engine oil from the car on the ground, the land will be deprived of grass for the next ten to decades, seriously damaging the land, and if it is dumped in the garbage can, it will seriously pollute the air after lifting the lid of the garbage can.

If it is poured into the sewer, it will also cause pollution to our lives, so it is the most correct choice for the waste oil to be collected by the ** people, and their disposal method is not only waste utilization, but also does not pollute the air and land.

Owners with strong hands-on ability, do not go to the ground and trash cans after replacing the waste engine oil of your car, and directly send these waste engine oil to the 4S store to make the most correct choice. After all, the environment is everyone's, and it also needs to be cared for by everyone, if some car owners really don't have time to send it to the 4S store, or if there is any reason why it is inconvenient to send it to the 4S store.

It is recommended to pour it in the gutter, not on the trash can and the land, which will pollute the air and affect the growth of the land, so it is the most correct way for the owner to rush into the gutter when it is inconvenient to send the waste engine oil to the 4S shop, which will not affect the land and will not pollute the environment.

The things you need to pay attention to when buying a car are as follows:

1. Confirm the purchasing ability

Determine the purchasing power, after buying a car does not affect the overall quality of life of the family, generally according to the average income of the family in the past three years, generally take out 20% of the family for three years, but not more than 10% of the value of the family's fixed assets.

2. Concerns:

The most important thing for a family car is safety, followed by affordability, because the safety of the car carries the life of a family, so safety is the top priority.

3. On-site confirmation:

According to the above two steps, basically determine the several models to buy, and go to the 4S store to confirm on the spot, including test drive, inquiry, loan, repair and maintenance, and other related information.

Released oil can be produced from used engine oil.

1. Demoulding oil production ratio:

1. 90% of waste engine oil.

2. 10% of waste engine oil becomes release oil masterbatch.

3. Add the waste engine oil into the release oil masterbatch into the waste engine oil (other suitable base oil can also be selected) and stir evenly to release the mold oil.

Second, the use of proportion:

When using, depending on the required concentration, the conventional ratio can refer to 10-100 kg of one kilogram of release oil mixed with water. Redeem as much as you want, and cash it out.

Where do tens of millions of tons of used engine oil go every year?

The ** of waste engine oil is a relatively unpopular industry, but in fact, it can make a lot of money, but you don't know. The engine oil that is replaced during car maintenance is waste engine oil, which is mixed with some impurities, such as dust or metal powder, resulting in a relatively black color and very high viscosity of gasoline. However, these oils still have a lot of functions, such as becoming lubricating oils, reducing friction and making parts last longer.

Used engine oil can also be re-refined into diesel and gasoline, which can then be resold and make a lot of money.

When purchasing used engine oil, it is very low, because these oils seem to be particularly useless, and the repair shop is also very unconcerned and will sell them at a low price. However, if it is in the hands of a professional and the amount of engine oil is very large, it can be purified, which is very useful. In the end, you get diesel and gasoline, but it's not very good quality and smells great.

You can also add some deodorants or acids and alkalis to remove these impurities, and you can also get gasoline or diesel with higher purity.

Mainly for purification, in fact, waste engine oil can also be used to produce concrete release agent. The use of concrete release agent is very large, which can prevent the concrete from sticking to the formwork, and can allow the formwork to be used repeatedly. When it comes to selling, it's also more expensive.

To make this kind of thing, you need to add some substances to the non-motor oil, such as liquid paraffin, preservatives, etc. Waste engine oil can also be simply purified, and then used to maintain the chain, so that the friction of the chain becomes relatively slight, which can make the service life of the chain longer.

It can be seen that the role of waste engine oil is very large, and this engine oil can also be directly burned, can be used for heating, and is generally used in livestock breeding plants, such as pig factories or cattle factories. If you don't know what to do, there is a certain way, you can go to the best waste engine oil, and you can also make a fortune.

Waste engine oil is very useful, although it has a lot of impurities inside, but after continuous smelting and purification, it can be returned to the market, and the performance can remain unchanged, and it can also play a lubricating effect, which can avoid wear and tear of the engine.

It can be used on construction sites, or used to sprinkle on urban roads to prevent dust, and other additives can be added to recreate engine oil, which has the effect of anti-pollution and sand-proofing.

It can be multiplied, with new additives, the oil can be modified, and then it can be resold in a different package, and it can be used as a release agent for concrete.

Hello, car waste engine oil can be used in the following ways**:1You can find your local car repair shop where they can collect used motor oil and send it to a dedicated disposal site.

2.You can find a local garbage disposal plant, or they can collect the used engine oil and send it to a place that specializes in the treatment of used engine oil. 3.

You can find a local ** agency, and they can also collect the used engine oil and send it to a place that specializes in the disposal of used engine oil. 4.You can go to your local environmental agency, and they can also collect the used oil and send it to a place dedicated to the disposal of used oil.

5.You can find your local car repair service center, and they can also collect the used engine oil and send it to a place that specializes in the disposal of used engine oil. In short, you can use the above several ways to ** car used engine oil to ensure the safety of the environment.

The use of waste engine oil: 1. Directly use waste oil as fuel and use it in oil-fired boilers. 2. It is used as a concrete release agent in construction. 3. Waste engine oil can be refined into diesel and gasoline.

Waste engine oil refers to the impurities such as water, dust, other miscellaneous oils and metal powder produced by the wear of parts in the use of engine oil, resulting in black color and increased viscosity. The second is the gradual deterioration of the engine oil, which produces organic acids, gums and asphalt-like substances.

The regeneration of waste engine oil is to remove the impurities in the engine oil by means of sedimentation, distillation, pickling, alkali washing, filtration, etc., which is a toxic substance and belongs to the solid hazardous waste marked by the state. Waste engine oil is strictly forbidden to be bought and sold at will, and should be handed over to a qualified waste oil treatment company to deal with.

The so-called waste engine oil refers to the impurities such as water, dust, other miscellaneous oils and metal powder produced by the wear of parts in the use of engine oil; The second is the gradual deterioration of the engine oil, which produces organic acids, gums and asphalt-like substances. The regeneration of waste engine oil is to remove the impurities in the engine oil by sedimentation, distillation, pickling, alkali washing, filtration and other methods, which is a toxic substance.

After use, the oil is often discarded due to various impurities such as water, organics, pigments, and dust. How to regenerate and utilize these waste engine oils mixed with various impurities?

The regeneration principle is based on the principle that oil and water are insoluble and the boiling point of water is lower than that of engine oil, and water can be separated by heating and static separation. The oxidation of concentrated H2SO4 is used to remove organic matter, the active clay is used to adsorb pigments, and mechanical impurities are removed by filtration, so that the purpose of oil regeneration can be achieved. Satisfied.

Waste engine oil is processed as lubricating oil and sent to auto repair shops.

1. It can be used as lubricating oil

First of all, the engine oil itself is a kind of lubricating oil, so even if it has turned black and cannot be used for cars, it is still very good to use it to lubricate the chain of the bicycle, all kinds of rusty metal, etc. You can use waste engine oil bottles to store these engine oils, put them downstairs or in some inconspicuous places, and if you need to use them, just pour a little out and wipe them on.

Moreover, the reason why the waste engine oil is black is because the engine oil is covered with engine oil impurities and iron filings, these things are solid, after standing for a period of time, these things will automatically be deposited into the lower layer of the old engine oil, at this time, the oil on it can be used as ordinary industrial lubricating oil.

2. Give it to a nearby auto repair shop

If you don't have so many places near your home to store these useless sundries, or if the property management in your community strictly prohibits such behavior, then you can only give all this waste engine oil to the nearby auto repair shop.

Rest assured, they will be happy to accept it, and even give you a little money in return if the relationship is good. These used engine oils, which are completely useless in your eyes, are treasures in the eyes of the mechanics of any auto repair shop. In their hands, the oil can be used to clean, lubricate, and remove car parts.

For many car parts that fail due to a lack of lubrication, instead of spending money on a special lubricant, it is better to use the old engine oil directly, and you can rest assured that they will know what to do with the old engine oil and use it to repair the car without any adverse effects on the car parts.