The system composition of a high pressure micro mist humidifier

The ultrasonic industrial humidifier adopts the world's most advanced atomization technology and integrated atomization components, the diameter of the fog particles produced is only 1-5 m, the particles are uniform, and can be suspended in the air for a long time. According to the different spray amounts, the output pipeline is divided into single pipeline output PVC pipeline and double pipeline output PVC pipeline, which can be reasonably arranged according to the user's need for humidification place, evenly distributed fog outlets, and the connection between pipelines needs to be sealed. The ultrasonic ultrasonic humidifier is divided into two designs: mobile and external wall hanging, and the equipment is made of stainless steel box as a whole, which is beautiful, practical and low in operating cost.

1. Pumping station unit: The high-pressure ceramic piston pump can produce 3 7MPa high-pressure water, which can adapt to the stable adjustment of the flow rate between 5kg h and 900kg h, and has a variety of protection functions; Stable performance, reliable and durable, strong continuous work.

2. Ultra-fine atomization nozzle: the core part is made of titanium alloy material and comes with a pressure-limiting starting valve, and the shell is made of copper or stainless steel, which has the characteristics of fine spray, no wear, small pressure loss, anti-clogging, no dripping, etc. Aperture:

Spray volume: at p=4MPa).

3. Control unit: microcomputer automatic control, automatic filtration, automatic humidification, and self-contained humidity control interface to realize automatic adjustment and control of humidity.

4 High-pressure shunt valve unit: The high-pressure shunt valve can automatically realize the supply or discharge of high-pressure water to the multi-way ultra-micro nozzle unit according to the requirements.

5. Super Filtration System: Po Super Filter, equipped with 5 micron and 10 micron two-stage water filters, effectively solves water quality problems and ensures that the sprinkler head is not blocked.

6. High-pressure pipeline: high-pressure seamless copper pipe, high-pressure seamless stainless steel pipe or high-pressure rubber steel wire composite pipe, the longest pipeline can reach 150 meters.

Low pressure alarms in high-pressure micro-mist humidifier systems are usually caused by several reasons:

1.Pump failure: If a pump in a humidifier system fails, it can cause insufficient water flow, which can reduce the pressure, triggering a low pressure alarm.

2.Clogged filters: If the filter element in the humidifier system is not cleaned or replaced for a long time, it will cause the filter element to clog, which will affect the water flow and pressure, and trigger a low pressure alarm.

3.Insufficient water level in the water tank: When the water level in the water tank is insufficient, it will cause the water supply of the pump to be insufficient, which will cause the pressure to drop and trigger the low pressure alarm.

4.Leaking lines: Leaking lines in a humidifier system can lead to a decrease in water flow, which can lead to a low pressure alarm.

5.Controller failure: If the humidifier system controller fails, it may cause the control signal to fail or error, causing a low voltage alarm.

To solve the problem of low pressure alarm in the high-pressure micro-mist humidifier system, it is necessary to investigate the above causes one by one and repair or replace them accordingly. At the same time, the maintenance of the humidifier system is also important, and the pumps, filter elements, pipelines, etc. are regularly inspected and cleaned to ensure the normal operation of the system.

Hello, these are common industrial humidifiers, and their main advantages and disadvantages are:

1. Wet film humidifier.

Advantages: clean and noiseless. It has the effect of washing and filtering the air. It has the effect of humidification and cooling. Clean, isoenthalpy humidification, no "white powder" phenomenon.

Disadvantages: large volume, small humidification capacity.

2. High-pressure micro-mist humidifier.

Advantages: Nano-scale spray particles, with a diameter of only 5-10 microns, suitable for indoor humidification, especially in textile and printing workshops with high humidification requirements.

Disadvantages: high-pressure air pump is required, high requirements for water quality, and noise interference.

3. Two-fluid dry mist humidifier.

Advantages: fine atomized particles, 100% dry mist, particle diameter of 3-5 microns, the pipeline adopts PPR pipe, beautiful, no dripping, no condensation, no later maintenance costs. The first choice for humidification of electronic workshop, automobile spraying workshop and dust-free workshop!

Disadvantages: Pure water needs to be used, and air source is used.

4. Centrifugal humidifier.

Advantages: It can be automatically humidified, ventilation and humidification can be selected separately, which is more suitable for direct humidification in the working environment of humidity (>60%RH). The use of Chen Ben is low, and the application is relatively mature.

Disadvantages: large particles, poor uniformity, waste of water. Suitable for outdoor humidification.

5. Ultrasonic humidifier.

Advantages: small particles, transportable, low energy consumption (only 1 10 to 1 15 of electric humidifiers), long service life, automatic humidity balance, automatic protection without water; It also has the functions of medical atomization and so on.

Disadvantages: High requirements for water quality.

The micro-mist humidification system needs to be prepared for the following quasi-fiber skin before operation:

1) The water supply pipe is connected to the inlet of the equipment filter and the water source is opened;

2) Add the potion to the original medicine tank, and the automatic dosing ratio pump adjusts to a certain dilution ratio;

3) The equipment has water inlet and water shortage protection, and can sense the water level of the mixed water tank.

4) Check whether the pipes and fittings in the host are tight and do not leak;

5) The power supply provided by the user must have its own leakage protection. Check whether the power wiring is correct and whether the ground wire is well connected to prevent leakage; Check whether the power supply voltage is consistent with the motor voltage;

Ultrasonic nebulizers utilize electronic high frequencies** (oscillation frequency is.

Or, beyond the range of human hearing, the electronic oscillation is not harmful to human beings and animals), through the high-frequency resonance of the ceramic atomizer, the liquid water molecular structure is broken up to produce a natural and elegant water mist, without heating or adding any chemical reagents. Compared with the heating atomization method, the energy is saved by 90%. In addition, a large number of negative ions will be released in the atomization process, which will produce electrostatic reactions with smoke and dust floating in the air to precipitate, and at the same time, it can also effectively remove formaldehyde, carbon monoxide, bacteria and other harmful substances, so that the air can be purified and the occurrence of diseases can be reduced.

2.With the right use, the nebulizer has a service life of about 3,000 hours and is extremely easy to replace. Its use of longevity is also related to the quality of water, such as:

If limescale is deposited on the atomizer sheet, please clean it with a soft cloth. According to different water quality and use purposes, different atomizers can be selected, such as stainless steel-coated atomizers in areas with hard water quality, and glass-glazed atomizers are selected for acid-resistant use environments. The atomizer has the function of automatic protection when the water level is lower than the water level switch, the atomizer will automatically stop working.

When the atomizer is working, do not put your fingers on top of the atomizer, because of the high frequency**, there will be a tingling sensation in the hand, but this is not an electrical shock or leakage.

3.Generally, the household humidifier is composed of a positive feedback resonant circuit composed of an atomizer sheet and BU406, capacitance and resistance, and the output resonant power can be adjusted between the 28V-50V DC voltage to control the size of the atomization.

1 Fog Fine high-pressure micro-mist cooking mouth can produce 5 billion fog droplets per second, and the diameter of the fog droplets is only, like the clouds in the mountains, and the humidification effect is excellent.

2. Energy atomization of 1 kg of water consumes only 6W of power, which is one percent of the traditional electric humidifier and one-tenth of that of a centrifugal or gas-water hybrid humidifier.

3. Reliable high-pressure micro-mist humidification systemZheng Wei main engine adopts imported industrial piston pump, which can operate continuously for 24 hours, and the cooking nozzle and water mist distributor have no power and vulnerable parts, and will not be damaged in a high dust environment.

4. Safe self-permeation cherry blossom pressure reliefWhen the cooking fogger stops working, the machine automatically releases the pressure of the high-pressure cooking pipe to prevent the cooking head from dripping.

The feature is that the high-end atmosphere is explosive.

Heating, labor-saving, this is the characteristic.

There aren't too many people making this machine right now.