-
The main Samsung, Sony, Benq, LG, Philip, these optical drives are quite good.
-
Samsung, in fact, it doesn't matter if it is pulled, the quality of the optical drive is currently good.
-
Pioneer, Sony.
BenQ, Samsung are good.
-
I recommend a brand to you, the brand is big, ***, and the reading performance is also very good, which is the pioneer of the pioneer brand
-
The optical drive is a consumable product, and it will go wrong after a year or two, and now as long as it is not a defective product, it can be used at this time
I used LG ***, it's been a year, and nothing has happened
-
Samsung. It's better to use the ** version.
-
Buy a famous brand and the quality is generally very good.
Or look at its warranty.
-
I used Samsung's originally! It's broken just over a year! No accessories yet! Can't fix it! Can only be scrapped, buy a new one!
-
Buy one"Comput"Let's do it! +VCD+ Burner is just over 300!
-
Go to the daily ** online to check, and then use the performance comparison, see for yourself, and have a one-year warranty. If it breaks within a year, it will be replaced with a new one.
-
You don't try how to know.
I used BenQ and it felt pretty good.
-
Haha, the floppy drive port is much smaller than the optical drive port, and it can't fit the optical drive.
-
No, it's the whole *** can't be put in, or the tray can't be opened. There is no way to change the chassis for the former. The latter, no problem, the baffle in front of the tray is removed, and it's OK.
-
It's hard to get dizzy, you go and try to return it (80 original price).
-
The normal way is to go to the store to change the optical drive, and you can't give up the big and small.
-
I think your case is also very old, and the heat dissipation is not good in this kind of anymore! Change the chassis!
-
If you've moved your computer recently, you might as well unpack it yourself to see if it's an optical drive.
The wiring is loose. (There is a power supply there.)"My computer"There is a display, but it doesn't mean that the cable is connected! Or just plug it back and forth!
ps: Because a friend received the computer in the mail a few days ago, it turned on too.
The optical drive cannot read the disc. Unpack and see that the line is all scattered!
If it still doesn't work, try changing the optical drive to a good machine.
No, then you have to consider the hardware problem!
-
In fact, you can do that, and it's best to buy one with a longer warranty. Generally, it is about 100-200 yuan (** price), and the market is more than 200 yuan. The cheap one may be the old one, so it is not recommended.
-
It's hard to say about the problem of disc picking.
If the disc is a little problematic, you can correct the error when you encounter a high-quality optical drive, and the optical drive is not very good, and the disc can also be placed.
But if the bad optical drive encounters a bad disk, it will not work.
Is it good to use the optical drive of the brand machine, but it is better to buy a new one yourself.
If you can copy it, it should be fine, but generally the CD disk is encrypted, and you need to use a strong virtual drive such as alcohol or clonecd to record audio tracks.
-
It's not about the optical drive, it's not about the disk.,Some optical drives are just dials.。
-
It shouldn't be a problem with the optical drive.
You copy the ** inside the CD and try it.
See if there's a sound.
-
I've also encountered such a situation, because the iron around the laser head of the optical drive is magnetic! There is a suction power with the above, and I can only find a piece of paper to find a way to stick the middle spacer, and the suction power is small! You can switch it on and off freely! Otherwise, find a way to demagnetize.
-
Can't you push it out with a needle?
It may be that the casing of your optical drive is topped.
-
That's what my optical drive looks like.
There is a small hole in the front of the optical drive, and when you open it, you will be fine with a toothpick!
-
Again, the Metrojet board doesn't recognize the IDE CD-ROM drive. The transfer doesn't work, IDE he can't recognize it, you don't want to go back, Meijie's board. Hey!
-
Why can't I install it? The interface is wrong? Or is it the right size for the chassis?
It seems unlikely that there is an interface problem, if it is, see if there is an adapter.
If the size is not good, see if you can modify the chassis, file it, and change it to an external one.
If it doesn't work, find a seller to change it, or sell it.
-
Find the guy who sold you the drive.
-
Determine if your motherboard supports SATA connectors.
If you don't understand, open the case, look at the hard disk data cable, or what type of data cable the original optical drive is, and choose whether it is an IDE interface or SATA interface when you choose to burn an optical drive.
Or provide the motherboard model, and the merchant will generally know.
-
Whether the data cable you connect to the hard disk is wide or small, whether it is small is to buy the SATA interface, not to buy the IDE interface!~
At the age of 23, everything has just begun, you are having an inferiority complex and pessimism, in fact, everything is fine, but what you see is the opposite. >>>More
Calm down! There is no obstacle in the world that you can't get over, and you're still a man that women can rely on. >>>More
Sleep, or listen to jokes, of course I think you may be depressed, and I am also occasionally depressed ...... >>>More
Let's go out for a walk, walk and walk, forget all the unhappy things, keep yourself busy, do homework, play badminton, it's all good, so that your head has no time to think about unhappy things, and your mood will definitely get better
Don't take it personally.
Rest assured. No one will look the other way at you because of what you say. >>>More