What does austenite state mean 10

Definition: A solid solution with carbon and/or other elements in iron and a face-centered cubic crystal structure. It is usually represented by the symbol a.

It still retains the face-centered cubic lattice of Fe. Its carbon-solubility capacity is large, dissolved carbon is c at 727 and soluble carbon at 1148. Austenite is a tissue that can only be stably present at temperatures greater than 727.

Austenite has good plasticity and is the structure required for most steel grades to be pressed at high temperatures. Austenite is not magnetic.

Definition of austenite: An interstitial solid solution formed by carbon in Fe.

Its performance characteristics: austenite is a solid solution with good plasticity and low strength, and has a certain toughness. It is not ferromagnetic. Therefore, one of the ways to distinguish austenitic stainless steel tools (common 18 8 type stainless steel) is to use a magnet to see if the tool is magnetic.

When ancient blacksmiths struck iron, the red-hot iron was in an austenite state.

Austenite Explained.

Carbon dissolves in iron to form an interstitial solid solution that has a face-centered cubic structure and is non-magnetic. Austenite is the structure of general steel at high temperatures, and its presence has a certain range of temperature and composition. Some quenched steels retain some of the austenite until room temperature, and this austenite is called residual austenite.

In addition to carbon, other alloying elements in alloy steels can also be dissolved in austenite, and the temperature and composition range of the austenite stabilization zone can be expanded or reduced. For example, the addition of manganese and nickel reduces the critical transition temperature of austenite below room temperature, allowing the steel to maintain its austenitic structure at room temperature, the so-called austenitic steel.

AC1: Pearlite when heated.

temperature of transition to austenite;

ar1: the temperature at which austenite to pearlite is transformed during cooling;

AC3: When heating, the ferrite is annihilated and analyzed.

the final temperature at which all are converted to austenite;

ar3: the temperature at which the austenite to ferrite transition begins during cooling;

accm: the final temperature at which all the smolled jujube cementite is dissolved into the austenite during heating;

arcm: The temperature at which the secondary cementite begins to precipitate from the austenite during cooling.

Austenite is a crystalline structure that, in metallurgy, refers to the face-centered cubic structure (FCC) formed by iron and its alloys (such as carbon steel, stainless steel, etc.) at high temperatures. The opposite of austenite is martensite, which is a tissue state with a typical body-centered cubic structure (BCT) formed by rapid cooling at low temperatures.

The austenitic structure has good strength and toughness, and is easy to hot work and work hardening. Therefore, many metal materials need to control the structure of austenite in the production process in order to obtain better physical properties.

For example, in the manufacture of stainless steel, the austenite vertical sensitive microstructure of the material is controlled by controlling the content of alloying elements, heat treatment process and other methods to achieve the purpose of anti-corrosion, heat resistance, tensile resistance and so on. At the same time, in the process of welding and heat treatment of metal materials, it is also necessary to have an in-depth understanding and grasp of the transformation and deformation of austenite, such as chain laws, so as to avoid negative effects on the mechanical properties and use properties of raw materials.

Austenite is a laminar microstructure of steel, usually a non-magnetic solid solution with a small amount of carbon in -Fe, also known as Vostin iron or -Fe. The name austenite comes from the British metallurgist William Chandler Roberts-Austen.

Austenite is a laminar microstructure of steel, usually a non-magnetic solid solution with a small amount of carbon in -Fe, also known as Vostin iron or -Fe.

Martensite is a microstructure name for ferrous metals, which is a supersaturated solid solution of carbon in -Fe.

Differences: austenite has good plasticity, low strength, certain toughness, and no ferromagnetism. Martensite, on the other hand, has high strength, but poor plasticity and weldability.

The austenite state refers to the metal heat treatment process of heating the steel above the critical point to form austenite, and the heated workpiece makes the temperature reach above the co-rough analysis temperature, so that the ferrite and cementite at room temperature are converted back to austenite.

Among the various microstructures of steel, austenite has the highest density, the smallest specific volume, the largest linear expansion coefficient, and the worst thermal conductivity. Therefore, the heating speed of Ozvodelitic steel should be reduced when heating.

Austenite. Austentiite) is a lamellar microstructure of steel, usually a non-magnetic solid solution with a small amount of carbon in -Fe.

Also known as Vostin iron or -fe. The name austenite comes from the British metallurgist William Chandler Roberts-Austen.

Austenite has good plasticity, low strength, certain toughness, and no ferromagnetism.

Categories: Education Science >> Science & Technology >> Engineering Technology Science.

Problem description: What is martensite? What about ferrite?

Analysis: Hehe, friend, it's really interesting, because I also asked the same question as you and me, I don't know if you are also learning mechanics, if so, we are lucky.

Ferrite Ferrite is a gap solid solution formed by C dissolved in -Fe, with a body-centered cubic crystal structure, denoted by the letter F or .

Austenite Austenite is a gap solid solution formed by C dissolved in -Fe and has a face-centered cubic crystal structure, which is denoted by the letter A or

Martensite: m denotes a supersaturated solid solution of carbon in alpha iron. However, it is not divided into upper martensite and lower martensite, bainite is divided into upper bainite and lower coarse bainite, it can be divided into high-carbon martensite (rock bucket-aged slatted martensite) and low-carbon martensite (flaky martensite).

Residual austenite is supercooled austenite that has not yet transformed below 230 degrees.

As for what you said about the content of the gear, this is because the residual austier is not a stable tissue, at room temperature it has to transform into some stable structure, which causes some series of deformation of the material, and you are especially the gear, the gear is subjected to alternating load, which is particularly important for its content.