How to connect two wives with one route

Method steps.

First of all, connect the LAN port of the computer and the router separately with a network cable, check the username and password on the back of the router, and log in to the router!

Set up the secondary router separately first, and don't connect the network cable from the top-level router to the secondary router that is not set up! ）

Find the LAN settings, different routers, the LAN port settings may be different.

Change the LAN port address to a different address from the Layer 1 route you are in.

Save the router and reboot, and log in to the router again with the LAN port address you just set (the user name is still the same as before)!

Find the WAN port settings (generally next to the LAN port settings), select the static IP, the WAN port IP address is set to one of the IP address segments of the top-level route, do not conflict with the existing IP, subnet mask, the default gateway is the default gateway of the top-level router, the preferred DNS and the standby DNS and gateway fill in the same!

For example, if this is filled in, the default gateway must be correct!

Restart the router and connect the network cable from the top-level router to the WAN port of the second-level router.

If you can't connect to the network automatically, you can disable the local connection and then enable the local connection!

I don't understand too much, a router is a wifi

Why should a router be connected to two wifi

And the router does not have wifi, and the router itself dials up the Internet or obtains it dynamically.

The router must be plugged into the network cable, and wifi is a service provided after the router dials up successfully.

Please add a description.

The specific steps are as follows:

The first wireless router is set up

1.First, let's log in to the router that is connected to the Broadband Kitten.

2.Set the SSID number and Channel in Wireless Settings - Basic Settings, and set the fixed channel number.

3.Set the wireless signal encryption information in the wireless settings - wireless security settings. Record the SSID, channel, and encryption settings of the wireless router after it is set.

The second wireless router is set up

1.Log in to the second wireless router that needs to be bridged.

2.In the Network Parameters - LAN port setting, change the IP address to be different from the first router (to prevent IP address conflicts), if you save it, the router will automatically restart.

<>4.Select the SSID number of the first router in the list of scanned signals, as shown in the figure below, and click "Connect".

5.Set the channel to be the same as the first router channel. At the same time, set the encryption information to be the same as the first router, and click "Save".

6.Shut down the DHCP server. In the DHCP server, select "Do Not Enable", save it, and restart the Luchang gripper.

7.At this point, the first wireless router and the second wireless router have successfully established WDS.

Summary. Through the bridging method, multiple routers can be connected to the grid.

Through the bridging method, multiple routers can be connected to the grid.

1. Connect the router reed device through the "cat" given by the telecom operator when handling broadband. Connect the WAN port of the router to the LAN port of the cat with a network cable.

2. Use the computer to search for the wifi of the router and connect, the computer opens the browser, and the browser address bar enters "log in to the management page of the router, and set the wifi name and password of the router.

3. Bu Wusong selects "Broadband Dial-up Internet Access" in "Internet Settings" and enters the broadband password provided by the telecom operator. The main router can be successfully set up.

4. The secondary router is used as the setting of the router that needs to be bridged, and the secondary router is connected to the power supply.

5. Use a laptop to connect to the wifi of the sub-router, open the browser, and enter the router settings interface of the sub-router. Click on "Application Management" and select "Wireless Bridge", and click to enter.

6. Select the wifi name of your main router, click "Next", enter the wifi password of the main router, after confirmation, the router will restart, and the parameters of the bridge can be automatically modified in the process of dismantling the router and restarting, such as the IP address of the secondary router or something.

You can use cascade or bridging.

Set the channels (frequency bands) of the two routes to the same, preferably 6 or 9;

Router A does not need to enable the WDS (i.e. Bridge) bridging function, route B needs to be enabled, and click Scan to fill in the key type and key of route A.

DHCP must be enabled for route A, and DHCP must be disabled for route B.

Finally, restart route B.

2. Cascade: Put a network cable from router i to router ii, router i is connected to lan port, router ii is connected to wan port;

The management IP addresses of the two routers cannot be on the same network segment. If Router I is, then Router II is changed to;

Router I turns on the DHCP service, and the WAN port of Router II is set to automatically obtain IP addresses.

Restart Route II.

1. First, find a network cable and connect the network cable with the output interface of the first router;

2. The second is to connect the other end of the network cable with the input port of the second router, and then use another network cable to connect the output port of the second router with the computer, and set the IP;

Log in to the settings page of the second router, then find the option of "WAN port settings" or "Internet access settings", and set the dynamic IP (automatically obtained IP address) of the second router to surf the Internet.

In addition, you need to find and open the options of "LAN port settings" or "LAN IP" on the settings page to change the IP address of the second router.

Hope it helps you.

It's very simple, change the IP of the LAN port of the second wireless route (B), and then go to the DHCP service to set it to ON (the DHCP server of route A is closed, or it is set to not conflict with the address of the beginning and end of route B), subnet mask, gateway, DNS1 and DNS2 fill in (go to the running state of route A to see what DNS is), and then enter the wireless settings of route B, turn on WDS, point scanning, the wireless list appears, select route A, enter the password of route A, The setup is complete. Purely manual input, please set a satisfactory answer

Two or more routers are used in many places, especially in places with relatively large housing areas, such as offices, shopping malls, etc. Nowadays, basically people use wifi routers, so how to connect two wifi routers? What are the router brands?

First of all, log in to the management settings interface of the main router, set the IP to, and then connect the two WiFi routers with network cables, and then, log in to the management settings of the secondary router, and set the IP to.

What are the router brands.

Smart home. With 600 million PC users and more than 700 million mobile phone users, the company focuses on providing home life solutions to a wide range of consumers. The company's children's guard, 360 portable wifi, 360 security router and other products sell well all over the country and have been recognized by countless consumers.

In 2015, the 360 smart home domain name began to be launched, and gradually involved in smart home.

2. Mercury Network

Founded in 2001, the brand is committed to providing solutions for security monitoring and network communication. The company's headquarters is established in Shenzhen, with a professional technical team, but also established a complete independent production and marketing system, its products include: routers, wireless, integrated wiring, power line network, security monitoring, etc.

Up to now, the company has established sales and technical service points in more than 20 cities such as Shanghai, Beijing, Shenzhen and Guangzhou.

3. Netgear Netgear.

Founded in the United States in 1996, the brand focuses on providing networking** solutions for businesses and homes. The company's products are powerful, smart, and easy to use, making it easy for you to live a smart home. The company has launched a product that is simple to operate, which can smoothly stream vertical movies at night, without buffering, which is very convenient.

In daily life, we often encounter such a situation: one device is connected to one wifi, and another device needs to be connected to the same wifi. So, how do you get these two devices to connect to the same wifi?

First of all, we need to make sure that both devices support wifi connection. Next, find the name and password of the wifi on the first device and tell it to the second device. This can be done by checking the WiFi settings or by asking the WiFi administrator.

Next, let the second device find the wifi that the first device is connected to in the wifi list, and click the "Connect" button. If WiFi requires a password, enter the password provided by the first device. Once you have completed these steps, the second device can be successfully connected to the same wifi.

It should be noted that if the two devices are too far away and the signal is weak, the connection may fail or the connection speed may be as slow as pants. At this point, we can move the location of the device or increase the coverage of the wifi signal to solve the problem.

In short, it is not difficult to connect two devices to the same wifi, you just need to find the wifi name and password, and then set it up accordingly in the other device.