How do the 15 Buick Yinglang tire pressure sensors match?

As an automaker, I will answer the matching method of the 15 new Yinglang low-configuration tire pressure sensors that are difficult for everyone to solve. Because there is no menu key on the low-profile light adjustment lever, the method is slightly cumbersome. First of all, there must be a special tire pressure matching instrument for Buick models, and a treasure is dozens of pieces to search for yourself.

First use the Yuanzheng 431 computer to enter the BCM interface, select the tire pressure reset, click OK, and then the car will sound twice, and the turn signal will continue to flash, then pick up the matching instrument and aim at the valve (between the rim and the tire), press the matching instrument button, hear the horn sound, indicating that the tire is OK, and then repeat the action to operate the other three tires. After the four tires are finished, the horn will sound two more times, and it will be fine at this time.

Hello: The low configuration needs to press and hold the kilometer adjustment button, the kilometers are not displayed, only the total kilometers are often pressed, and you can wait for the air pressure light to turn on. High configuration press and hold the gage button to find out the tire pressure display, and press and hold the enter key (about 3 seconds) [If you have a problem with the car, ask the car master.

4S shop professional technician, 10 minutes to solve. 】

You can get it in the 4S store or manually match the low configuration by yourself, you need to press and hold the kilometer adjustment button, the kilometers are not displayed, only the total kilometers are often pressed, and you can wait for the air pressure light to turn on. In the high configuration, press and hold the gage button to find the tire pressure display, and press and hold the enter key (about 3 seconds).

This can be matched manually, but it is relatively simple and convenient to match with a dedicated computer, the TS601 of Daotong supports the tire pressure sensor learning and activation of most models, and you can also use the tire pressure sensor matching of Taotong to learn programming, a tire pressure sensor supports the use of multiple cars.

Hello, you need to use a professional instrument to reset, you can also run on the road after the power off to see if there is a display. If not, you can go to the 4S store to reset the tire pressure.

Hope it helps, thanks! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

The operation steps of the Ming body are as follows:

1. Step on SAIC-GM Buick Yinglang sullenly.

The brake pedal is used to prepare the engine to start.

2. Press the one-button start button of SAIC-GM Buick Yinglang.

3. The instrument lights of SAIC-GM Buick Yinglang are all lit up, which proves that the engine of SAIC-GM Buick Yinglang is started.

Fourth, inflate the four tires of SAIC-GM Buick Yinglang to the standard air pressure.

5. Press the tire pressure reset button of SAIC-GM Buick Yinglang to complete the Pipei spine. (Done).

Buick Yinglang tire pressure matching method: Yinglang's tire pressure matching is more troublesome.

Stop the vehicle, pull the handbrake, and operate the vehicle with power on. Press the "MENU" button on the turn signal lever to switch the small screen on the instrument cluster to the "Vehicle Information Bar". Turn the up and down selection buttons on the turn signal lever to find the tire pressure information bar.

Press and hold (long-press) the "Set CLR" function key on the head of the turn signal lever until "Tire pressure learning" is displayed, then select "Yes". After the selection is completed, the horn will sound twice in a row to confirm the start of tire pressure learning. At this time, the left front turn signal is on.

To deflate the tire, the sequence is: left front - right front - right rear - left rear, unscrew the valve cap, and poke the small column in the valve core with a key stick or something to make the air in the tire out. The valve can be released until you hear a horn sound, the turn signal on the current tire side goes off, and the right turn signal comes on.

When the right turn signal is on, repeat the above method and continue to deflate the right front tire until the horn sounds and the right turn signal goes out. Stop deflate. Stop deflate.

Do this in turn. Observe the air pressure of each tire on the instrument, the tire pressure will be less than the normal value, then it is necessary to inflate the tire in order, and the tire pressure should be within the normal range, generally. After the operation, if there is a "please service the tire pressure monitoring device" is normal, if there is too much deflation, it can be rematched.

After 12 years, Buick series models do not support manual reset, can only use the tire pressure reset instrument for tire pressure reset, 4S and some repair shops have, in fact, this reset instrument is not expensive, about 150 yuan, Ma Yun's family some tire pressure monitoring shops can put a deposit to borrow the tire pressure reset instrument, only the round-trip express cost.

The reset instrument is shown below.

Mine is Regal, the learning method is as follows, your model should be basically similar, go to the driving computer menu to find it.

1.Enter the tire pressure display interface of the trip computer, display "press the set ctrl key to re-learn", press the set ctrl key, the turn signal will start for 3 seconds and the horn will beep twice to enter the learning mode. 2.

Starting from the left front wheel, press the reset antenna upwards against the valve core, close to the tire sidewall of the hub, press the tool start switch, and when the horn beeps out, the tire pressure sensor information has been read. 3.According to the above-mentioned method, the right front right rear left rear wheel wheel speed sensor is read in turn, and when the learning process is over, the turn signal starts for 3 seconds and the horn beeps twice.

Buick Yinglang tire pressure sensor matching method:

1.When the tire pressure display of the driving computer is inconsistent with the actual tire pressure data, Danpai can re-learn the tire pressure and use tire pressure monitoring to re-learn the method;

2.When the vehicle is ignited, turn the left joystick of the steering wheel and select the input tire pressure display bar;

3.Press the Set CRL button on the Zolasan bar (about 2 to 3 seconds) and the trip computer will prompt the tire pressure monitor to re-learn. Select Yes (to enter TPM re-learning mode); At this point, the horn goes off twice, indicating that the tire pressure monitoring study is resuming.

The trip computer also has a display screen: tire pressure learning);

4.The vehicle's left turn assist light and left mirror turn signal illuminate to indicate that the left front tire pressure is re-read. At this point, increase (inflate) or decrease (release) the pressure on the left front tire for about 5 seconds.

Complete the re-learning process of the vehicle's left front tire pressure monitoring; The horn sounds to prompt you to enter tire pressure learning mode;

5.The horn honks twice and the turn signal is on for about 3 seconds, indicating that the four TPMS units have been relearned.

If you want to monitor the tire pressure of Yinglang, you can first press the menue button on the turn signal lever, and then enter the vehicle information, and then rotate the ring on the lever to see the tire pressure displayed on the screen.

Yinglang emits a radio signal containing tire pressure information inside the tire. Yinglang's tire pressure detection sensor is mounted on the rim, fixed with a nut, and runs with the tire, and it has its own coin cell battery to power the sensor. When the tire pressure monitoring computer receives the tire pressure signal from the tire pressure sensor, it converts it into a human-readable tire pressure value, which is then transmitted to the instrument control unit.

When the instrument control unit receives the information, we can call up the current tire pressure status from the on-board screen. If you want to monitor the tire pressure of Yinglang, you can first press the menue button on the turn signal lever, and then enter the thick type into the vehicle information, and then rotate the ring on the lever to see the tire pressure displayed on the screen.

Generally speaking, the replacement of the tire pressure sensor requires tools and certain technology, so the general owner is directly to the 4S store for replacement, the labor cost is generally about 60 yuan, the sensor depends on the 4S store, the sensor is generally in the 60 to several hundred, mainly depending on the needs of the owner to buy. If the owner will not install it himself, it is recommended to go to the 4S shop for replacement.

Photo by Rent Zhiwen: Q&A called the beast) Model Y Model 3 Model X AION V Ideal One Xpeng Motors P7 @2019

Indicates that the tire pressure alarm is caused by inaccurate sensor detection data or other reasons. On the premise that there is no problem with the tire pressure and tire condition, go to the maintenance organization as soon as possible to confirm the cause of the failure. Tire pressure monitoring is a function that many cars are equipped with, this function is very practical, the tire pressure monitoring system can monitor the tire pressure, when the air pressure is abnormal, it can alert the driver.

Most cars are equipped with tire pressure monitoring systems that use wheel speed sensors to detect wheel speed, which can only alert the driver when the tire pressure is abnormal, but the driver cannot see the real-time tire pressure data. Some high-end cars have tire pressure sensors in their wheels, which allow the driver to see real-time tire pressure data. If you often run high speeds or long distances, you can add this kind of sensor.

The tire is the only part of the car that is in contact with the ground, and the tire is very important for the driving stability and driving safety of the car. The air pressure of the tyre should not be too high or too low, and if the tyre pressure is too high, it will reduce the contact area between the tyre and the ground, which will affect the grip and handling. If the tire pressure is too low, the tire will deform at high speeds, which will increase the chance of a puncture.

Therefore, it is recommended that riders often check their tire pressure, and also check whether there is any damage on the surface of the tire.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, glad to answer for you. The 17-year-old Buick sedan Hongyinglang tire pressure monitoring figures remain unchanged, and the summary is that if the tire pressure alarms, but the tires are not abnormal. Indicates that the tire pressure alarm is caused by inaccurate sensor detection data or other reasons.

On the premise that there is no problem with the tire pressure and tire condition, go to the maintenance organization as soon as possible to confirm the cause of the failure. Tire pressure monitoring is a function that many cars are equipped with, this function is very practical, the tire pressure monitoring system can monitor the tire pressure, when the air pressure is abnormal, it can alert the driver. Most cars are equipped with a tire pressure monitoring system that uses a wheel speed sensor to detect wheel speed, which can only alert the driver when the tire pressure is abnormal, but the driver cannot see the real-time tire pressure data.

Some high-end cars have tire pressure sensors in their wheels, which allow the driver to see real-time tire pressure data. If you often run high speeds or long distances, you can add this kind of sensor. The tire is the only part of the car that is in contact with the ground, and the tire is very important for the driving stability and driving safety of the car.

The air pressure of the tyre should not be too high or too low, and if the tyre pressure is too high, it will reduce the contact area between the tyre and the ground, which will affect the grip and handling. If the tire pressure is too low, the tire will deform at high speeds, which will increase the chance of a puncture. Therefore, it is recommended that riders often check their tire pressure, and also often check whether there is any damage to the tire surface under a closed book.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions!

Hello. If you can't learn the Buick Yinglang key manually, it is recommended that you need to use a special tire pressure. decoder.

If the decoder can't match this situation, it is necessary to focus on checking whether it is caused by the failure of the tire pressure sensor, and if the tire pressure sensor is faulty, it is necessary to replace the pressure sensor to solve the fault. Replacing the tire pressure sensor with a new one and then rematching it to the tire pressure sensor will solve the problem. It is recommended that it is best to go to a 4S shop or a professional car repair shop for inspection and maintenance, so as to avoid unnecessary damage to the vehicle due to improper operation by the repairman when repairing in an ordinary repair shop outside.

Why can't I learn the tire pressure monitoring of the 14 Buick Yinglang?

Hello, this question can give you a perfect reply, wait for me to sort out the information, I'm typing, 2-3 minutes, don't finish.

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! Hello. If you can't learn the Buick Yinglang key manually, it is recommended that you need to use a special tire pressure.

decoder. If the decoding hunger meter can not match this situation, it is necessary to focus on checking whether it is caused by the failure of the tire pressure sensor, if the tire pressure sensor is faulty, it is necessary to replace the first sensor of the dismantling pressure transmission mu to solve the fault. Replacing the tire pressure sensor with a new one and then rematching it to the tire pressure sensor will solve the problem.

It is recommended that the best Nachai is to go to a 4S shop or a professional car repair shop for inspection and maintenance, so as not to cause unnecessary damage to the vehicle due to improper operation of the repairman when repairing in an ordinary repair shop outside. When the time comes, the gains outweigh the losses. Thank you very much for this inquiry, and I hope my answer can be helpful to you.