Machine Auto Black Screen of Death 10, Machine Auto Black Screen of Death

Updated on number 2024-05-13
14 answers
  1. Anonymous users2024-02-10

    There may be three reasons for your situation: one is that your memory module is not plugged in tightly, and it may be that it was not plugged in when it was installed. You open the case and check it out.

    If you have a problem with your CPU fan, open the lid of the case as well, and then turn it on to observe the operation of the fan. The third is that your motherboard burned out for some reason, the possibility of this is relatively small, but it does not mean that it is impossible, my friend's machine used to be just equipped with the same, he didn't like to turn off the computer when the lights went out at night, and he wanted to wait for the power to turn off automatically, as a result, after several power outages, his machine was also a black screen of death as you said, and sent it back to check that it was the motherboard burned, but fortunately, within 15 days of the package return, he was given a free motherboard.

    You check the reason as soon as possible, if it's not a problem with the memory and fan, then send it back for inspection as soon as possible, otherwise it will be a loss if the time drags on.

  2. Anonymous users2024-02-09

    There are many reasons, solved step by step:

    1。Reinstall the operating system, don't go online, use it for a day or two to see, if it's not good.

    2。If the temperature of the graphics card is too high, add a fan (the possibility of the graphics card being bad is relatively high, it is recommended to change it).

    3。Change the memory and run it with a single memory for more than an hour at a time.

    4。If the power supply is dirty, if it is dirty, disassemble the power supply and clean it, and check whether there are any electronic components damaged in the power supply (professionals are recommended to do it).

    5。Pay attention to whether the temperature of the north and south bridges is high, if the fingers are hot, the motherboard is not good, and you have to change it.

  3. Anonymous users2024-02-08

    1。Software conflicts, incompatibilities: redundant similar software installations! The computer is overclocked or there is too much software installed, and the system memory is insufficient!

    360 Butler, Software Uninstall, Find Uninstall, Again: Powerful Cleaning!

    Or: Start Menu, Programs, Find Excess Software Uninstalled!

    2。The computer system is interfered with by stubborn viruses and Trojans or worms, or you have lost your system files!

    360 system first aid kit, start first aid, after finishing, restart the computer!

    After booting up, [File Recovery Area], click on: suspicious startup items and Trojans, delete files completely!

    Again: [System Repair], select all, fix it now!

    Network Repair]. Restart your computer!

    Jinshan first aid kit, after the next mu regrets loading, click on the lower right corner: upgrade now! After finishing, click [Extended Scan] to scan immediately, process immediately, and restart the computer!

    Antivirus, Full Scan, Quarantine, Trojan and Suspicious Viruses, Point: Completely Removed!

    3。Do it when necessary: restore the system or reinstall the system with one click!

    4。Hardware problems, hard disk or motherboard or fan problems, send it for repair!

  4. Anonymous users2024-02-07

    Anti-virus or computer hardware is not compatible or something.

  5. Anonymous users2024-02-06

    The black screen has always been a problem with the graphics card, in fact, the color lines that run through it up and down are flashing, which is also a problem with the graphics card, 1 is a problem with the graphics card itself, 2 is incompatible with the hardware, I suspect that the biggest problem is caused by the incompatibility between the graphics card and the memory module, so this is also the reason why the black screen but the CPU works, it is recommended that lz check it well.

    In fact, there is another main reason for the crash: heat dissipation, my family is like this, sometimes playing games, it will crash, but this should be paid attention to, if necessary, you can come to an external radiator, look at lz consideration...

  6. Anonymous users2024-02-05

    I guess it's still a memory problem, and I'm not enough.

  7. Anonymous users2024-02-04

    Your problem is not easy to solve, depending on the situation you are describing should be a component crashing.

    From what you said, hardware aging is most likely the main cause. The above you said that you must unplug the power supply before you can restart, which means that your hardware has lost control when it fails (here refers to the motherboard), so it means that your hardware itself or the contact between the hardware has a problem, so it is not easy to do (if possible, you look at the bottom of the motherboard, if there is a discoloration phenomenon, it is not good).

    I'll give you a way, but it's also a palliative, not a cure, give it a try.

    Remove dirt from the chassis, observe the parts of the motherboard that need to be dissipated, and increase the ventilation of the chassis.

    There is also a suspicion that the hard disk and the system, the virus needs to be eliminated by yourself, it is recommended that the hard disk can be organized.

  8. Anonymous users2024-02-03

    You try it with a different memory, and you pay attention to your CPU temperature to see if the temperature is normal before the black screen.

  9. Anonymous users2024-02-02

    And what you said about playing in safe mode will not crash black screen, that is impossible, you said before that you have reinstalled the system, unless you have a problem with the system itself, causing you to have a black screen of death. Start the machine in safe mode without loading any of your drivers, so that the drivers are minimized. There is less data buffering and low hardware usage. It can be seen that it is still a hardware problem with your machine itself.

    The black screen of death that causes you to have this situation is possible in the following ways: 1. The memory is too small 2 The power supply is insufficient 3. The hard disk is damaged (excessive heating) It doesn't matter what the graphics card is at all and there is a CPU thing If it's one of these problems, you can't turn on the machine and can't enter the game In addition, the cable of your monitor should be plugged in.

  10. Anonymous users2024-02-01

    The computer first crashed, nothing responded, the sound was also the sound of the crash, then the screen went black, and then it didn't reboot or shut down.

    This is a graphics card issue! You change the 3D vertical effect in the graphics card properties.

  11. Anonymous users2024-01-31

    I suggest that if you can't reinstall it, just disassemble the case, wipe the dust, put static electricity, and you're good to go.

  12. Anonymous users2024-01-30

    One is that your computer has poor heat dissipation, or your memory module is loose.

  13. Anonymous users2024-01-29

    It looks like it's a notebook and I've been using it for a few years.,The heat dissipation is not good.,Go clean up the dust.,The graphics card is about to break.,You need to replace it with a new one.。

  14. Anonymous users2024-01-28

    Everything on the motherboard is re-pressed; A little · · In the clean-up clean-up, it is estimated that there is not much of a problem

Related questions
13 answers2024-05-13

Hello, computer blue screen, mainly: "memory error" or "software incompatibility" caused! >>>More

16 answers2024-05-13

Choosing to inhibit regeneration --- this is a palliative solution. >>>More

14 answers2024-05-13

With the progress of science and technology, the development of computer, automation and mechanical design technology is getting faster and faster, and automatic welding has become an advanced manufacturing technology. >>>More

17 answers2024-05-13

I am an ATM engineer, in this case, you can check the balance after 20 minutes after the end of the transaction, because all ATMs have the function of automatic reversal of withdrawal failure, that is, the system will automatically flush back the money that has not been issued in the account for you, and the transaction reversal of the bank is generally within 10 minutes, and the inter-bank transaction time will be longer. If it has been corrected, then there is nothing to do, you just change the device and continue to withdraw money, if there is no correction, you complain to your card issuer, remember that it is the card issuer! For example, if you are a CCB card withdrawing money on an ICBC ATM and you have not paid out the banknotes, you have to complain to CCB instead of ICBC, if you are a CCB card and you are trading at a CCB ATM, you should complain to CCB, in a word, which bank the bank card belongs to! >>>More

6 answers2024-05-13

When we choose the equipment, we will give preference to the fully automatic, automatic toilet paper rewinder adopts the technology of modern computer programming, simple operation, low technical requirements for operators, no special requirements. >>>More