How easy to set up the router

1.There is a small hole in the back of the router, which is generally written as rst or reset, and the small hole can be restored to the factory settings of the router after poking the router for more than 5 seconds after finding a small and sharp thing; 2.A router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows:

Connect the network cable out of the broadband cat to the WAN port of the router, each computer is connected to the LAN port of the router, the IP address of the computer network card is set to be automatically obtained, enter it in the address bar of the computer browser, specifically to view the network parameters obtained by your computer network card, and log in through the IP address of the gateway) Log in to the router, the general user name and password are admin, select the WAN port setting, Set your broadband account and password to the PPPoE mode (if it is a fixed IP, you should choose the static IP mode), save and restart.

This answer belongs to the "harmonious" individual, and it is shameful to copy According to the following data settings, you can realize the sharing of the Internet: If you use a router to set up a local area network, realize the network sharing equipment; In general: Here's how to connect and set up:

This answer belongs to the "harmony" individual, copy shameful 1: connect the network cable (RJ-45) of your broadband cat to the WAN of the router, and connect the network cable (RJ-45) of the rest of the computers to the LAN port of the router; This answer belongs to the "harmony" individual, copy shameful 2: The IP address of the computer network card is set to be obtained automatically, and there is also input in the address bar of the computer browser, specifically according to the network parameters obtained by your computer network card, through the IP address of the gateway to log in to the router, most of the usernames and passwords are admin, select WAN port settings.

This answer belongs to the "Harmony" individual, copy shameful 3: Set your broadband account and password to the PPPoE mode (if it is a fixed IP, choose the static IP mode). 4：

After saving, restart your computer and you're good to go. This answer belongs to the "harmony" individual, shame on copying Thank you for my answer! Beg.

Find the restart button on the router, restart it is generally very small, poke it with a pen, set it up, and the router manual has to look at it carefully.

There is a small black hole next to the router's power plug. When the power is off, press and hold it down. Plug it in – five seconds before releasing it. Factory reset.

1. Appearance of the wireless router.

Let's first understand the various interfaces of wireless routers, basically wireless routers are similar, and the position of the reset button may not be the same.

Connect the wireless router well, I believe this is difficult for everyone, after connecting, start the router.

2. Wireless router parameter settings.

Use a network cable to connect the wireless router to the computer, of course, you can also use the wireless search connection directly, but it is recommended for beginners to use a network cable to connect directly. After connecting, open the browser, it is recommended to use IE, enter it in the address bar to enter the settings interface of the wireless router.

You need to log in before you can set other parameters, the default login username and password are admin, you can refer to the manual (the simplest is to directly look at the instructions on the shell of the routing period).

After successful login, select the Setup Wizard screen, which will automatically pop up by default.

After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and you can click Next directly.

According to the setting wizard step by step setting, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection.

Enter the account and password you applied for from the network service provider, and go directly to the next step after entering.

3. Restart the wireless router after the settings are complete.

Next, go to the wireless settings, set the SSID name, this item defaults to the model of the router, this is just the device name displayed when searching, you can change it according to your own preferences, easy to search and use. The rest of the setting options can be defaulted according to the system and do not need to be changed, but a password must be set in the network security settings to prevent being rubbed on the network. Once the setup is complete, click Next.

At this point, the setup of the wireless router is complete. Restart your router and you're ready to connect to the Wi-Fi.

There is a small black hole next to the router's power plug. When the power is off, press and hold it down. Plug it in – five seconds before releasing it. Factory reset.

1.There is a small hole in the back of the router, which is generally written as rst or reset, and the small hole can be restored to the factory settings of the router after poking the router for more than 5 seconds after finding a small and sharp thing; 2.A router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows:

Connect the network cable out of the broadband cat to the WAN port of the router, each computer is connected to the LAN port of the router, the IP address of the computer network card is set to be automatically obtained, enter it in the address bar of the computer browser, specifically to view the network parameters obtained by your computer network card, and log in through the IP address of the gateway) Log in to the router, the general user name and password are admin, select the WAN port setting, Set your broadband account and password to the PPPoE mode (if it is a fixed IP, you should choose the static IP mode), save and restart.