x, 1 medium and long needle, 1 long needle, empty two needles, how to hook 20

Bow hook method:

Method steps.

The yarn is wound around two coils.

Hook two needles in each braid hole in the previous row, for a total of 12 short needles. The disc in the center of the bow is woven.

Hook 8 braid needles, pull.

Hook 15 long needles in a ring of 8 braid needles. Empty one needle to pull out.

Crochet 8 needles braid needles.

In the penultimate braid, start hooking 4 long needles, one medium long needle, one short needle, and lead dial.

Hook the other side of the bow symmetrically as before.

Pentagram Hook Method:

Method steps.

Start by wrapping two coils with wool.

In a two-step method, the prototype of the other four small corners is hooked.

Let's hook the outer corner of the star. The hook method is as follows:

1 braid needle and 1 short needle (corresponding to the two braid needles in the previous row).

In the long hole braid hole in the previous row) hook 1 short needle 1 medium long needle, connect 2 braid needles.

Hook 2 short needles at the middle and long needles that have just been hooked.

Hook 1 short needle 1 braid needle (corresponding to the two braid needles in the previous row).

Lead in the short braid hole of the previous row.

After hooking the five horns, the star is complete.

You read it wrong, it's not a long needle and an X, but a needle with an inner hook and a long needle outside, and the symbol of the inner and outer hook needles is a hook under the long needle.

1. First of all, the crochet needle is wound once before the thread.

2. After also inserting the crochet needle, it is two threads in the shape of wheat ears above the crochet needle, and one line below the crochet needle.

3. Then the needle is wound around the thread.

4. Bring out the thread from the needle, and there are three threads on the crochet needle.

5. Crochet winding for a week.

6. Bring the thread through the two coils on the crochet needle, and the remaining two coils on the crochet needle are completed.

7. Winding again.

8. Finally, two coils are brought over, one needle is left on the crochet needle, and a long needle is completed.

Preparation materials: wool, crochet needle.

1. First of all, wrap a circle on the crochet needle, that is, the needle in the long needle;

2. Then pass the crochet through the corresponding needle under the fabric, and there are three turns on the crochet needle at this time;

3. Then wrap a loop of wire on the crochet needle, and hook the first two coils at the same time, at this time, there are only two needles left on the crochet needle, and half of the long needle has been completed below;

4. Finally, wrap the wire again, and pass the crochet needle through the remaining two coils at the same time again, and a long needle is completed.

First take out the wool and tie a slipknot, insert the crochet into the slipknot, pull out from the place of insertion after winding, this needle is called the braid needle according to this method and then hook 4 braid needles, now there are a total of 5 braid needles, and make a mark on the 5th braid needle, and then hook 3 braids, these 3 braids are also called the place where the standing needle crochet hook is inserted into the mark buckle after winding, and then hook the thread out, and there are 3 coils on the crochet needle at this time.

First, wrap the yarn around the crochet needle twice (note that it is two turns, one more than the medium and long needles).

Insert the crochet needle into the left braid.

Hook out a stitch. Now there are four stitches on the crochet hook.

Two stitches and one stitch (the first time), now there are three stitches left on the crochet hook. Hook the thread and pull it to the right to continue and merge the needle.

Two stitches and one stitch (third time) are completed. Note that the parallel needle of the long needle should be repeated three times in total.

Here's ** you can check out.

Pull the thread out of the whip needle and pull it out sequentially in two turns around the crochet needle.

Hook a braid for the bottom needle, then a braid for the starting needle, and then a short needle.

After a short row of needles is hooked, then hook three more braids to make the first row of cross needles for the standing needle, then hook the first row of cross needles, and at the end of the first row of cross needles, hook a long needle.

Then hook a needle of braid to make the second row of short needles of the standing needle, then hook the second row of short needles, after the second row of short needles are hooked, then hook three more braids, and then hook the second row of cross needles.

Specific steps:

42 stitches from medium coarse wool, knit 4 rows of flat needles, knit 6 stitches in the 5th row, follow the needle held in the left hand 360 degrees (along the dry needle or counterclockwise direction as you like) turn a circle, every 6 stitches to turn a circle, with the same gesture to turn the rest of the circle.

The 6th row weaves 2 needles and 1 needle.

Knit 2 stitches and 1 stitch in the 7th row.

Knit 2 stitches and 1 stitch in the 8th row.

Leave some threads and cut them, and the remaining number of stitches is passed through with a sewing needle, and it is tightened and completed.

Turning 360 degrees means holding the needle in your left hand and turning it outward or inward, as if drawing an O on the left side of the right needle, forming a shape like a petal.

Note: If you want the flowers to look a little deeper, you can change to receive 1 stitch every 3 or 4 stitches.

Adjust the weave according to the size of your favorite flowers and the thickness of the yarn.

Tools: soles, wool, crochet hooks.

1. Prepare the soles, buy a stronger thread, and use the cone of the shoe. (I don't know if you've seen it, there are places to repair shoes.) Make a circle on the sole.

4. The most critical step is that the general women's shoes start with 14 stitches, and men's shoes start from 16 stitches. The first needle is hooked with two long needles, and the second is not hooked, so that the hook is separated by one needle. When hooked to the left side, the last stitch snaps with the line on the left side and the thread is pulled onto the hook on the right side.

5. Hook the top of the shoe with two long needles. The second line is hooked in the hole vacated in the middle of the first line, and the third line is hooked between the two long needles of the second line. You need to take the bait too much. Finally, the needle is done.

Needle of woolen slippers: according to the size of the sole, the needle can be started, or 7, needle. In short, the two sides should not be crooked, but should be equal.

How to weave woolen slippers.

1. First hook the line on the bottom;

2. Hook a short needle with wool on the bottom line, hook four rows, and don't hook four rows at the heel;

3. Weaving the bottom: use two rod needles to weave according to the shape of the bottom, according to the thickness of the wool and the size of the sole, add a needle on both sides of the second row of weaving to form a rounded corner, and add a needle to the width of the weaving point, not too much, the bottom of the weaving is better than the sole of the sole, because the wool shrinkage is good, and it will be too large and uneven;

4. Sew the woven bottom on the sole: if there is a thin sponge, put two layers under the woolen sole (the sponge and the woolen bottom can be sewn from top to bottom with a thread in the middle).

5. Needle: the toe of the shoe is facing yourself. To leave a piece of thread slightly longer than the sole, the needle can be started according to the size of the sole, or 7, needle.

In short, the two sides should not be crooked, but should be equal. The first stitch is short, then one braid, two medium and long stitches (i.e., one large stitch) in the third braid, two medium and long stitches in the fifth braid, and so on. Hook to the end and hook a short needle, and then hook the remaining thread out of the short needle loop and tighten it.

Again, the needles mentioned above are all large needles. The first stitch of the medium-length needle in the second row is hooked in front of a large needle in the first row, and the second needle is hooked in the braid needle below, (if the yarn is thin, you can also hook both needles underneath, so that it will be thicker.) The first needle of the medium and long needles in the third row is the same as above, the second needle is hooked in the middle of the two medium and long needles in the lower row, and so on.

Remember. The first and last stitches of each row are short stitches.

6. In order to make the upper not high or low, don't hook every braid, but properly separate the braid hook, if each braid is hooked, the upper will be high.

7. Hook flower: to choose the pattern suitable for the size of the sole, try to hook in the middle, the general size of the pattern is three big needles to start. Note:

The front and back should be symmetrical, and the front and back should be three large needles. The hook is more than 20 rows, the sole is long, and the number of rows will be more) When changing the color and line, it is changed when there are two medium and long needles and one needle.

I've never played before, so how can I learn faster.