How many ways do you tie your shoes?

I would tie my shoelaces in three ways. One is the traditional bow, which my mother taught me, just put two laces through the shoe and tie it into a simple bow. The other is to write a cross and weave a more complex pattern like a Chinese knot.

I would tie my shoes in two ways. The first is the common way to tie your shoelaces, first wear the shoelaces in, and then tie the shoelaces down crosswise. The second is to put the present through it first, then go down vertically through the hole, and then pass sideways to the side.

I would have 4 kinds. The first is a slower, bow-tying method. Then the second one is faster, two fingers, tie the bow in 2 seconds (the appearance is average), and the third way is to tie the shoelaces to the back of the foot.

The fourth is to tie a flower (the four-petal kind) with shoelaces. ）

There are tutorials on the Internet about the patterns of tying shoes, and I have learned several before.

But in general, I still use the most basic model.

Or wear it on the left and tie it on the right.

At the moment, if I can insist on tying my shoes, this is the only way I can use it.

I will have a lot of ways to tie my shoes, I usually like to fiddle with these things when I am fine, and I hold the shoelaces a little bit of experimentation, but my most common use is the more popular way of tying shoelaces, and I usually have nothing to practice and play with that kind of trick.

I'm ashamed to say that there is only one way I can tie my shoes, which is to tie a dead knot and wear them until they can't be used.

Of course, the shoes I bought are also durable, so when I throw them, the shoes will have a strong smell...

I will tie my shoes in two ways, one is the most classic way we all know, but I am used to the extra strap in the end and I am used to racing it back into the shoe; The second is to cross two different colors of rope together, which is particularly cool, especially the laces with very different colors are the highlight.

I would only use the two stupidest methods before, one is to directly tie the dead button. You shouldn't want to learn this method, because it's rare to be able to untie it after tying it up. The other is to send two live buckles, that is, tie one live buckle first, and then tie the other one on the basis of this live buckle.

1. How to tie the laces: First of all, the two ends of the laces are natural. Stagger the ends of your laces together in the middle.

Wrap the left lace around the right lace and straighten it. Fold the left-hand laces into a double layer. Fold the right-hand lace up and place it on top.

Thread the laces on them through the hole in front of the left. Tidy up your shoelaces and you're done.

2. How to tie the laces: first straighten the two ends of the laces. Stagger the ends of your laces inward.

Wrap the laces around each other. Fold the laces on both sides into your nose with both hands and pinch them. Interlace the two noses of the laces.

Thread both noses of the lace through the hole underneath. Pull both noses apart and tidy them up, and the laces are tied.

No, 1 flat straight method (European style).

1. Thread the head of the shoe straight from the bottom (gray part) into the two bottommost holes from top to bottom.

2. One end of the lace (yellow end) is worn diagonally from bottom to top and straight into another shoe hole in the second horizontal row.

3. The other end of the lace (blue end) is diagonally diagonally through the third row of shoe holes from bottom to top and straight into the other shoe hole.

4. Repeat the operation, and the two shoe heads are alternated.

NO, 2 rope ladder tie method.

1. Thread the shoelace head straight from bottom to top from the bottom (gray part) of the bottom two holes.

2. Thread the two ends of the laces straight up into the second row of shoe holes.

3. Before threading the laces upwards into the next row of holes, cross the laces and thread them under the laces on the other side in the vertical direction.

4. In the topmost hole, the two shoehead heads cross again and pass under the vertical part, and then tie them tightly.

The simple way to tie the laces is easy to learn, and it can be easily learned, reducing the time it takes to wear shoes.

Place the shoe with laces in front of you in the same way you walk, put the laces on, and adjust the length of the laces on both sides so that they are the same length.

2.Straighten the laces on both sides and adjust the length of the laces on both sides according to the comfort of your feet.

3.Cross the laces on both sides and pass them through each other to form the first step of cross-tieing.

4.Hold the laces on both sides with both hands, pinch the root of the lace with your hand, and pass the lace on the right hand through the left lace from the bottom.

5.Press the right lace into the loop with your left hand, tighten the buckle from side to side with both hands, and adjust the length of the right loop.

6.Hold the coil part in your right hand, hold the single lace part in your left hand, press the single lace with the middle finger of your left hand, and pass the single lace through the loop formed by the middle finger and the double lace.

7.The shoelace loops formed by two-way tensioning.

8.Adjust the length of the lace loops on both sides according to the length of the remaining laces so that the first and second lace loops are about the same size, so that the laces are tied.

There are seven ways to tie your shoelaces1. Cross knots1. One end is knotted on the inner side, and the other end is perforated in order;

2. Jump a hole and penetrate it;

3. Tie it in the same way;

4. After repeating, the remaining shoelaces are tucked into the inner side and knotted;

5. Purple shoelaces are also perforated in the same way and in order;

6. Wear it from below and then out from above;

7. Choose harmonious laces according to the color of the shoes;

8. Excess shoelaces are knotted on the inside.

2. Trapezoidal knots1. After adjusting the length of both ends of the laces, pull out the laces from the inside to the outside;

2. Pull out the shoelaces and thread them into the second hole from the outside to the inside;

3. The left shoelace is worn out from under the shoelace between the two holes on the right, and the right side is the same;

4. Repeated operation;

5. Pay attention to the direction of the cross laces at both ends;

6. Excess shoelaces are stuffed into the shoes and knotted;

7. The trapezoidal knot after completion.

3. Twist knots1. Two shoelaces are knotted inside and worn out;

2. Wear out of the second hole after the two shoelaces are crossed;

3. At this time, in order to center the intersection as much as possible, tighten the laces;

4. The appearance of twist is produced in the process of centering the intersection;

5. Enlarged twist knots**;

6. Leave the last hole;

7. Finally, use x to deal with it, so that it is more convenient to put on and take off;

8. The remaining shoelaces are knotted together in the shoes.

Fourth, double X knot1. Start with the second hole and run through the laces from the outside to the inside;

2. Tie white shoelaces with the X knot method;

3. White X knot look;

4. The end is plugged into the inner side and knotted;

6. Knot the ends of the blue laces;

7. The remaining lines are relatively long, and you can make a ring;

8. Go around a few times and pass through the ring.

Fifth, double direct knots1. After leaving a length of yellow laces, they are worn out of the left face and entered from the right face;

2. Wear shoelaces in the direction of the dotted line;

3. Adjust the shoelaces so that they remain in a straight shape and do not roll them up;

4. Tuck the excess part into the shoe;

5. Also leave a section of the white shoelace on the inside, and knot it with the yellow shoelace inside;

6. Wear shoelaces in the direction of the dotted line;

7. Adjust the white shoelaces so that they are on top of the yellow shoelaces;

8. The excess part is knotted with the yellow laces on the inside of the shoe.

6. Diagonal knots1. After passing through the first hole, make a single knot inside, and the other end passes through the third hole on the left side from the inside to the outside;

2. The shoelace is then threaded through the second hole on the right side;

3. Use blue laces to complete the slash knot;

4. Use white shoelaces to tie a diagonal knot in the opposite direction;

5. The method is the same as that of blue shoelaces;

6. The blue and white laces eventually come out of the hole of the tongue part;

7. The appearance of piercing out of the tongue part;

8. It looks better if it is loosely tied.

7. Internal X knot1. After something is consistent at both ends, each end is pierced through the second hole;

2. Penetrate into (2) hole from (1) hole, and then penetrate out from (3) hole;

5. Knotting on the inside;

6. The finished style.

Ask the question: Yes. I understand thank you.

Okay, thank you.

Proper shoelaceing can prevent blisters on the soles of your feet and abrasions on your heels, and there are several ways to tie your shoes:

1. Cross knots

1. One end is knotted on the inner side, and the other end is perforated in order;

2. Jump a hole and penetrate it;

3. Tie it in the same way;

4. After repeating, the remaining shoelaces are tucked into the inner side and knotted;

5. Purple shoelaces are also perforated in the same way and in order;

6. Wear it from below and then out from above;

7. Choose harmonious laces according to the color of the shoes;

8. Excess shoelaces are knotted on the inside.

2. Trapezoidal knots

1. After adjusting the length of both ends of the laces, pull out the laces from the inside to the outside;

2. Pull out the shoelaces and thread them into the second hole from the outside to the inside;

3. The left shoelace is worn out from under the shoelace between the two holes on the right, and the right side is the same;

4. Repeated operation;

5. Pay attention to the direction of the cross laces at both ends;

6. Excess shoelaces are stuffed into the shoes and knotted;

7. The trapezoidal knot after completion.

3. Twist knots

1. Two shoelaces are knotted inside and worn out;

2. Wear out of the second hole after the two shoelaces are crossed;

3. At this time, in order to center the intersection as much as possible, tighten the laces;

4. The appearance of twist is produced in the process of centering the intersection;

5. Enlarged twist knots**;

6. Leave the last hole;

7. Finally, use x to deal with it, so that it is more convenient to put on and take off;

8. The remaining shoelaces are knotted together in the shoes.

Fourth, double X knot

1. Start with the second hole and run through the laces from the outside to the inside;

2. Tie white shoelaces with the X knot method;

3. White X knot look;

4. The end is plugged into the inner side and knotted;

6. Knot the ends of the blue laces;

7. The remaining lines are relatively long, and you can make a ring;

8. Go around a few times and pass through the ring.