About the placement of items around the fire tether box in the company s corridor??

Article 60 of the Fire Protection Law stipulates that if a unit violates the provisions of this law and commits any of the following acts, it shall be ordered to make corrections and shall be fined not less than 5,000 yuan but not more than 50,000 yuan

1) The configuration and setting of fire-fighting facilities, equipment or fire safety signs do not conform to national standards or industry standards, or are not kept intact and effective;

2) Damage, misappropriation, or unauthorized dismantling or dismantling of fire-fighting facilities and equipment;

3) Occupying, blocking, or closing evacuation passages or safety exits, or engaging in other conduct that impedes safe evacuation;

4) Burying, occupying, or blocking fire hydrants or occupying fire spacing;

5) occupying, blocking, or closing the passage of fire trucks, obstructing the passage of fire trucks;

6) Setting up obstacles on doors and windows in crowded places that affect escape and fire fighting and rescue;

7) Failure to take timely measures to eliminate fire hazards after being notified by the fire department of the public security organ.

Where individuals exhibit any of the conduct in items (2), (3), (4), or (5) of the preceding paragraph, they are to be given a warning or a fine of up to 500 RMB.

Where there is conduct in items (3), (4), (5), or (6) of the first paragraph of this article, and corrections are refused after being ordered to make corrections, compulsory enforcement is to be carried out, and the costs required are to be borne by the violator.

According to the ** you provide, the flowers on the hydrant box do not block the normal use of the fire hydrant, and the fire hydrant box also has obvious signs so it is okay.

It doesn't affect the opening of the door, so it should be fine.

1. According to Article 2 of the "Shanghai Shanghai Fire Hydrant Management Measures": it is strictly forbidden to pile up objects within 10 meters (10 meters) around the fire hydrant, and it is not allowed to stop within 15 meters, and it is not allowed to manufacture fire hydrant tools and joints without permission, and to open the fire hydrant without authorization.

2. Article 10 of the relevant provisions of these measures, unauthorized change of the use of fire hydrants, affect the use of fire hydrants or theft, destruction of fire hydrants, by the public security fire supervision agencies in accordance with the following provisions of the punishment:

1) A fine of between 50 and 500 RMB is imposed on individuals, and where the circumstances are serious, a fine of between 500 and 1,000 RMB is imposed;

2) A fine of between 2,000 and 20,000 yuan shall be imposed on units or individual industrial and commercial households, and if the circumstances are serious, a fine of between 20,000 and 100,000 yuan shall be imposed.

Fire hydrant, officially known as fire hydrant, is a fixed fire protection facility, the main role is to control combustibles, isolate combustibles, and eliminate ignition sources. It is divided into indoor fire hydrants and outdoor fire hydrants.

Fire protection systems include, outdoor fire hydrant system, indoor fire hydrant system, fire extinguisher system, and some will also have automatic sprinkler system, water cannon system, gas fire extinguishing system, fire detection system, water mist system, etc. The fire hydrant is mainly used by fire trucks to draw water from the municipal water supply pipe network or outdoor fire water supply pipe network to extinguish the fire, and can also be directly connected to the hose and water gun to extinguish the fire. Therefore, the indoor and outdoor fire hydrant system is also one of the important firefighting facilities for fire fighting.

No sundries can be placed on the front and both sides of the indoor fire hydrant box, and there shall be no items covering the fire hydrant.

The Trial Measures for the Safety Management of Fire Hydrants stipulates: "It is strictly forbidden to pile up objects within 10 meters around the fire hydrant, and no parking is allowed within 15 meters. “

Placement: 1Fire hydrants should be placed in public shared spaces such as corridors or halls, and generally in the walls of the above-mentioned spaces"Fire hydrants"and shall not set up obstacles in front of it to avoid affecting the opening of the fire hydrant door.

2.Fire hydrants are generally not located in rooms (such as boxes), which do not meet the regulations of fire protection and are not conducive to the timely rescue of firefighters.

Article 21 of the Fire Protection Law of the People's Republic of China stipulates that smoking and using open flames in places with fire and high risk are prohibited. If it is necessary to use open flame operation due to special circumstances such as construction, the approval procedures shall be handled in advance in accordance with the regulations, and corresponding fire safety measures shall be taken; Operators shall comply with fire safety regulations.

Personnel who carry out fire hazard operations such as electric welding and gas welding and operators of automatic fire protection systems must be certified to work and abide by fire safety operation procedures.

Article 19 stipulates that the place of production, storage and operation of flammable and explosive dangerous goods shall not be set up in the same building as the place of residence, and shall keep a safe distance from the place of residence.

Where the place of production, storage or operation of other articles is set up in the same building as the place of residence, it shall comply with the national technical standards for fire protection in engineering construction.

Where to place the hydrant:

1. The fire hydrant should be placed in the corridor or hall and other public shared spaces, generally in the wall of the above-mentioned space, no matter what kind of decoration it is made, it is required to have a conspicuous mark (write "fire hydrant"), and no obstacles shall be set in front of it to avoid affecting the opening of the fire hydrant door.

2. The fire hydrant cannot be separated in the room (such as the box), which does not meet the regulations of fire protection and is not conducive to the timely rescue of fire personnel.

Article 28 of the Fire Protection Law of the People's Republic of China stipulates that no unit or individual shall damage, misappropriate or dismantle or stop using fire-fighting facilities and equipment without authorization, shall not bury, occupy, or block fire hydrants or occupy fire spacing, and shall not occupy, block, or close evacuation channels, safety exits, and fire truck passages. Doors and windows in crowded places shall not be equipped with obstacles that affect escape and fire fighting and rescue.

Article 21 of the "Fire Protection Law" makes the following provisions on the maintenance of fire-fighting facilities, equipment, fire-fighting spacing and fire-fighting passages: no unit or individual shall damage or misappropriate, dismantle or stop using fire-fighting facilities and equipment without authorization, shall not bury or occupy fire hydrants, shall not occupy fire-proof spacing, and shall not block fire-fighting passages.

The Fire Protection Law clearly stipulates that fire hydrants are special equipment for fire fighting, and fire hydrants are not allowed to be used for other water purposes unrelated to fire fighting. If there are special circumstances, it must be approved by the relevant water supply department before it can be used, and no unit or individual shall open the fire hydrant without permission.

Indoor fire hydrants are strictly forbidden to be blocked or occupied. As long as it doesn't affect the normal use of the fire hydrant, I think it should be fine.

Answer: Hello, fire hydrant management regulations: 1Article 1 In order to strengthen the management of fire hydrants, ensure fire water supply, and ensure the safety of economic construction and people's lives and property, these regulations are formulated in accordance with the relevant provisions of the Fire Protection Law of the People's Republic of China and other relevant provisions, combined with the actual situation of the city.

2.Article 2 All units and individuals within the municipal administrative area (including counties and cities under the jurisdiction of the municipality) must abide by these provisions. 3.

Article 3 These provisions shall be implemented by the public security and fire supervision organs at all levels. 4.Article 4 Fire hydrants are urban public fire safety facilities, which should be included in urban construction planning, and the municipal public utilities management department is responsible for unified construction.

Look at the Fire Protection Law first, and then look at the Fire Safety Regulations of the Ministry of Public Security.

1. Hemp lining glue belt (20 or 25 meters).

It is possible to extend the extinguishing radius and increase the extinguishing area.

2. Fire hydrant (DN65 or DN50).

Fire extinguishing can be carried out in the event of a fire.

3. Water gun (16-19).

In the event of a fire, the water channel can release the water source to extinguish the fire.

4. Indicate the red light.

Instruct the hydrant on how to use and operate.

5. Alarm button.

Alarm in the event of a fire.

6. Fire pump lifting button.

Turn on the water pump of the fire hydrant.

7. Self-rescue fire hose reel (20 or 25 meters).

It is possible to extend the scope of application of fire hydrants.

There is a fire hydrant head, there will be water in it, and the fire hydrant hose sprinkler head ** can be used to extinguish the fire when it is connected to the fire hydrant head.

There are alarms, fittings, hoses, water guns, valves.

There is no problem in terms of specifications, but the pretending is too ugly.

Aesthetically, it should be changed to installation before construction.

It is required to avoid abrupt twists and turns to prevent the reduction of water pressure resistance; Based on GB6246 "Fire Hose".

Announcement No. 23 of 2011 of the Standardization Administration of the People's Republic of China approved the issuance of GB6246-2011 "Fire Hose", which is a mandatory national standard and will be implemented on June 1, 2012.

Sudden twists and turns should be avoided when laying to prevent the ability to reduce water pressure resistance; Twisting should also be avoided to prevent the inner snap hose interface from disengaging by the rotation of the hose after filling with water. After filling with water, it should be avoided to forcibly drag on the ground, and when it is necessary to change the position, it should be lifted and moved as much as possible to reduce the wear and tear of the hose and the ground. Contact with corrosive chemicals such as oils, acids, and alkalis should be avoided.

There is no basis but there is a principle, that is, when it is to be used, it must be able to be taken out quickly and neatly, that is, one end of the hose can be quickly connected to the fire hydrant, and the other end can be pulled out very smoothly.

The fire hose should be neatly rolled up and placed in the hydrant box.

In case of fire, the water bag can be quickly opened and connected to the water pump for water supply.

A fire hose is a hose used to transport flame-retardant liquids such as high-pressure water or foam. Traditional fire hoses are lined with rubber and wrapped in linen braid. State-of-the-art fire hoses are made of polymeric materials such as polyurethane.

Fire hoses have metal joints at both ends, which can be connected to another hose for longer distances or nozzles to increase the pressure of the liquid jet.