Where do the specified IP addresses come from when the DHCP server is set up? 10

This is a private address and is used within the LAN. A DHCP server is set up with an address pool. This refers to the gateway address, which is the mask.

Indicates that 256 IP addresses are a network segment. The gateway address and broadcast address are removed. So only 253 addresses can be used.

This means splitting these 254 addresses into a local area network. to be a local area network. The DHCP server is set up to facilitate automatic acquisition of IP addresses.

You can get the IP from the server only by clicking on the automatic IP on the computer. You don't have to set it up yourself.

This is the private network address segment of the C address, which cannot be published to the Internet, and is generally used in the local area network of the organization. In addition, there are also Class A and Class B, both of which are private CIDR blocks. In general, when there are fewer enterprise terminals, such as less than 255 terminals, it is customary to use segments, and the mask is set to contain 254 available addresses, and if the gateway is set to DHCP, the remaining 253 addresses can be dynamically allocated to PCs.

You go online to find out what is called private IP address and public IP address!

First, first open the browser car to return to the baggage, enter the login address, and log in and close the management interface of the late-land router. Then enter your username and password to log in.

2. Click on the "DHCP Server" option, and then check "Enable DHCP Server". Next, enter the Address Pool Start Address and the Address Pool End Address.

3. After the setting is completed, click the "Save" button, and then the router can take effect.

DHCP refers to a range of IP addresses controlled by the server, and the client can automatically obtain the IP address and subnet mask assigned by the server when logging in to the server.

To set the static IP address method, right-click [Network] - right-click [Local Connection] - left-click [Properties] - double-click [Internet Protocol Version 4] - Use the following IP address - set the IIP address, subnet mask, and gateway.

Here's how to do it:

1. Open the browser, enter the login address, and log in to the router management interface. Then enter your username and password to log in.

2. Click on the "DHCP Server" option and check "Enable DHCP Server". Next, enter the Address Pool Start Address and the Address Pool End Address. These two parts should be set up to ensure that they are on the same network segment as the router).

The first three digits of the IP address must be the same.

3. After the settings are completed, click the "Save" button, and then restart the router to take effect.

The function of the IP address reservation setting in the DHCP server is to use the reservation function of the DHCP server to bind the specific IP address to the client computer when a special computer needs to obtain the same IP address, so that the DHCP client will obtain the same IP address every time it requests the DHCP server.

1.In the DHCP console window, to add a reserved IP address scope, select the "Reserve" option;

2.Right-click Hold and select the New Hold option from the shortcut menu;

3.Click the "Add" button to complete the addition of a reserved address, and you can add multiple reserved addresses;

After the server is installed, adjust it according to the application requirements of the network, and then complete the IP reserved address of the DHCP server.

The IP address reservation feature provided by the DHCP server binds a specific IP address to the MAC address of a specified NIC, so that the IP address is dedicated to the NIC.

In the network, some special computers need to get the same IP address every time. This requires the DHCP server's "reserve" feature to bind a specific IP address to the client computer in order for the DHCP client to send a DHCP request to the DHCP server. When the server requests it, it will get the same IP address.

Once the DHCP server is installed, it can be adjusted according to the requirements of the web application, such as configuring the DNS server and gateway, creating scopes, and setting reserved IP addresses. When there are multiple scopes, multiple scopes can also be combined into a single superscope for easy management.

Set the IP reserved address on the DHCP server.

In the network, some special computers need to get the same IP address every time, which needs to use the "reserve" function of the DHCP server to bind a specific IP address to the client computer, so that the DHCP client will get the same IP address every time it requests the DHCP server.

1.Reservation Name: Enter a reservation name that is only used to distinguish it from other holds.

The MAC address can be obtained by running the WinIPCFG command on Windows 98 ME, and the GetMac command on Windows 2000 XP 2003 Vista 2008.

4.Supported Type: To set the DHCP service types supported by the client, select the "Both" option.

Step 3: Click the "Add" button, and a reserved address will be added successfully. You can add multiple reserved addresses.

After the DHCP server is installed, it can be adjusted according to the application requirements of the network, such as configuring DNS servers and gateways, creating scopes, and setting reserved IP addresses. When there are many scopes, you can also form multiple scopes into super scopes for easy management.