Need a master of routing technology for a job?

I'm going to do the subnet planning part. Since it's an assignment, it's best to try the other parts on your own. Someone else does it for you, and it doesn't do you any good. You say yes.

1. Divide the address space into subnets.

The LAN connected to the ISP router and the addressing of the link between HQ and the ISP router are at your discretion. Now using the address space, the network is subnetted to provide:

Assign Subnet 1 to the LAN connected to the HQ. to provide enough IP addresses to support 60 hosts.

A total of 64 addresses, 62 available addresses, which can be used as gateways, - 26 are assigned to hosts.

Assign Subnet 2 to the LAN connected to the Branch. to provide enough IP addresses to support 30 hosts.

A total of 32 addresses, 30 available addresses, which can be used as gateways, - 27 are assigned to hosts.

Assign Subnet 3 to the WAN link between HQ and Branch. to provide enough IP addresses to support 2 hosts.

It can be split into up to 8 pairs of 30-bit mask addresses, etc. It is sufficient to be used as an interconnection address or a device loopback address.

Use subnet 0 for future expansion.

The rest is used for future expansion.

Empty design is really boring.

Connect your router, it's a router, not a cat, connect to your computer, plug in the lan8 port, enter the road to set up, set the IP of the route to the line you just got Connect your router to your school's line, pay attention to connect it to the WAN port, your computer is connected to the LAN port, okay, you can go online, to.

If you do not use the WAN port of the wireless router, change the IP of the wireless router to DHCP and try again.

It may be a disconnection caused by an IP conflict.

The downstairs is connected from the LAN, the upstairs is connected to the WAN, and the upstairs WAN port mode is set to DHCP. That's it.

You want to play a game, he wants to watch a movie, 4m is a bit old, if you install a router, you are on the third floor, he is on the sixth floor, wireless is definitely not good, or pull the network cable, which one should you buy: two people use the best speed limit function, one person is divided into 2m, otherwise, he looks at the computer and you can't play the game, where to put the router: pull the network cable and it doesn't matter if you put it, but the power supply of the router and the cat must be turned on 24 hours a day, it can't be turned off, or others can't use it.

Setting up the router: It's as simple as reading the manual.

1. Plug in the router and the cat's power.

2, use a network to connect the WAN port of the cat and the router, 3, the router has 4 LAN ports, use a network cable to connect your computer and any LAN port of the router, and then use a network cable to connect to any LAN port of your fellow countryman's computer and the router, 4, use your computer to open the browser, enter (some routers are:, this has to look at the manual), user name: admin password:

admin (lowercase), network settings--- WAN settings--- Internet access type: PPPoE--- Internet access account and password. That's it.

5. Set the speed limit: read the manual, different routes are not necessarily the same.

1. Telecom does not provide access equipment, it is recommended to buy a better wireless, cat and router integrated machine, and both do not need to pull the wire;

2. The computer and the router should be in the same network segment, that is, the mask is automatically given, the gateway, after setting, directly enter in the IE, the user name and password are generally admin, if you don't read the manual, enter the setting routing interface after a quick setting, enter your ID and password, DHCP is open, basically it's good, set the login password (otherwise you can steal your network).

3. Two computers need to have a wireless network card, and the IP will be automatically obtained.

4. Let's live!

Just buy a router, and then pull two more network cables out of the router to connect your computer and his computer respectively.

Regarding the router setup and physical connection, the manual is clear and easy to understand.

It's up to you about the location of the place,**Convenient to put**,How to put the network cable with less **。

Forehead.. Personally, I think if one is on the third floor and the other is on the sixth floor, if you buy a general router, the signal will be average. Therefore, when you buy it, you must make it clear, and you can't find the signal when you take it back to save it.

Personally, I think that a 4 trillion network should be enough. After you buy the router, there will be a setting instruction inside, you just need to follow that setting, that is not very difficult. I'm a girl, and I set up my own router every time, so you can do it.