The refrigerator just bought, and the two sides are hot, is it normal

This is normal! In the past, most refrigerator condensers were backpack-type (the condenser is usually said to be the radiator on the back). Most of the refrigerator radiators (condensers) manufactured now are embedded on both sides of the box, so that the large area is good and helps to better heat dissipation, and the faster the heat dissipation, the faster the heat absorption (refrigeration), the faster the heat absorption (refrigeration), and also saves electricity, and is beautiful.

Because, the refrigeration of all refrigeration equipment (including the refrigeration of heat pump air conditioning) has the process of heat absorption and heat release (simply put, the process of heat exchange), and the refrigeration (heating) of the refrigeration equipment cannot be achieved without heat absorption and heat release. Therefore, when the refrigerator is refrigerated (compressor running), both sides of the box are to be exothermic, and the essence of heat release is the heat absorption (refrigeration) of the food in the box.

Normal. The reasons for the high temperature may be as follows: 1. The first time you use the refrigerator, because the temperature inside the refrigerator is higher than the room temperature, if you want to reach the temperature you set, it will inevitably cause the compressor to work for a long time, and the temperature on both sides will be relatively high.

Therefore, it is normal for the compressor to have fewer stops and high temperatures on both sides. 2. When using the refrigerator for the first time, do not put anything in the refrigerator, which will increase the cooling time, resulting in more time than an empty refrigerator, and of course, more heat will be emitted. 3. If the temperature is too low, it will cause a very thick frost in the refrigerator, or even freezing, as long as the temperature is turned up.

Generally, in winter and summer, due to the change of external ambient temperature, it is not possible to use the same gear (mechanical refrigerator). 4. Low temperature compensation switch, whether it is turned on, if it is turned on, please turn it off immediately. This is also one of the reasons for the above phenomenon.

If you understand the refrigeration principle of refrigerators, the above phenomenon is not so difficult to explain. But if you have to look for after-sales service for too long, it may be a problem with the temperature head!

Very normal. Because today's refrigerators bury the condenser tubes on both sides and behind the refrigerator, and rely on the two sides of the box to release heat to achieve the purpose of heat exchange. Therefore, it is necessary to pay attention to reserving more than 10 cm of space on both sides and behind the refrigerator for heat dissipation, otherwise it will not only waste electricity, but also the refrigeration effect in the refrigerator will not be good.

The reasons why the sides of the newly bought refrigerator are hot are:

1. The compressor of most refrigerators is generally located on both sides of the fuselage, and when it is working, it will generally emit a lot of heat because of condensation, and then the two sides of the refrigerator will be hot, which is likely to reach about 50, and if you touch it with your hands, it will often produce a hot feeling.

2. Some users tend to put the food in the refrigerator when it is at a high temperature, at this time the refrigerator will be quickly cooled, and its workload will be greatly improved, so its heat dissipation is more urgent, and the heat dissipation pipes of the refrigerator are just on both sides of the refrigerator body, so the two sides of the refrigerator will be hot at this time.

3. Some refrigerator users, in order to be beautiful and save space, often place the refrigerator in the corner, which will actually reduce the air flow around the refrigerator, and the heat generated during the operation of the refrigerator cannot be discharged in time, which will eventually cause the two sides of the refrigerator to be hot.

4. Generally, the heat dissipation condenser of the refrigerator is distributed on both sides of the refrigerator, how much cold energy the refrigerator produces, it will emit the same amount of heat from both sides, and the workload of the refrigerator will increase in summer, the room temperature is high, or the heat dissipation space is insufficient to cause the heat dissipation to be poor, etc., which will cause the refrigerator to become very hot on both sides.

Resolution. 1. Due to the heat on both sides of the refrigerator, the refrigerator can not be placed too close to the wall, nor can it cover things on both sides of the refrigerator, which will hinder the heat dissipation on both sides of the refrigerator and increase the temperature, so that there is enough space on both sides of the refrigerator to dissipate heat, so as to effectively alleviate the heating of the refrigerator.

2. When using the refrigerator, do not open the refrigerator too frequently, frequent opening will increase the temperature in the refrigerator, thereby increasing the workload of the refrigerator, and the refrigerator will make the temperature on both sides higher if it is in operation for a long time.

3. Once the refrigerator is used, it is best not to stop using it, because once it is out of use, especially in summer, when the temperature is very high, it will take a long time for the refrigerator to reach the set refrigeration temperature, and the temperature on both sides will increase after a long time of operation.

4. The items stored in the refrigerator should be kept in a certain number, not too little, because the temperature of the items stored in the refrigerator will be very low, and the temperature will not rise rapidly even in the state of short-term power failure, so that the refrigerator will quickly reach the set temperature in a short time after power-on, so as to avoid the temperature on both sides of the long-term operation.

What's going on with the hot sides of the newly bought refrigerator, I think it's because of the electricity, and its heat exhaust fans are also on both sides, so it may be the reason.

Many consumers find that the refrigerator often heats up on both sides during normal use. Especially in the summer, when the temperature is relatively high, the workload of the refrigerator is relatively large, and it is easy to burn on both sides of the refrigerator at this time. At first, many consumers thought that the refrigerator was malfunctioning, but in fact, it was normal for the two sides of the refrigerator to heat up.

The main reason for the heating on both sides of the refrigerator is that most of the heat dissipation pipes of the refrigerator are located on both sides of the refrigerator, when the compressor is working, the heat will circulate through these pipes, according to the law of conservation of energy, how much heat is dissipated by the refrigerator, how much cold energy will be generated, so the refrigerator is used for a long time, especially in the summer when it is hot, the temperature on both sides will be very high or even hot. Therefore, it is normal for the sides of the refrigerator to be hot or hot.

Poor ventilation can cause the refrigerator temperature to rise. The two sides of the refrigerator are close to the wall or are covered, the ventilation is not good enough, and there is not enough space for heat dissipation, which will cause the temperature on both sides of the refrigerator to be relatively high.

Opening the refrigerator too often or for a long time can also cause the refrigerator to become too hot. Opening the refrigerator too often or leaving the refrigerator open for a long time will increase the burden of the refrigerator operation, increase the workload of the refrigerator, and thus increase the temperature of the refrigerator.

Restarting your refrigerator after it has been deactivated will cause the refrigerator to emit more heat. Once the refrigerator is out of use, especially in the hot summer, when the refrigerator is started again, it will take a long time for the refrigerator to reach the set temperature, which increases the operating burden of the refrigerator, and the temperature of the refrigerator will continue to rise.

Placing too little stuff can also cause the refrigerator to rise in temperature. Because the temperature of the items in the refrigerator is relatively low, it can ensure that the temperature will not rise rapidly when the power is off for a short time, and after the power is turned on, the refrigerator will quickly reach the set temperature, if there are too few things in the refrigerator, this time will be extended, and the refrigerator will release more heat.

Under normal circumstances, the phenomenon of heating or hot on both sides of the refrigerator is a normal phenomenon and does not belong to the category of quality problems. However, if the problem is more serious and the above methods cannot be cooled, it is recommended to consult the after-sales service of the refrigerator, repair it or replace it with a new refrigerator, or choose a refrigerator that does not heat up on both sides.

This is a normal situation. The two sides of the refrigerator are hot because all the refrigerators are ambushed on both sides of the refrigerator, so the phenomenon of heat appears. This does not affect normal use.

What's the deal with the hot sides of a newly bought refrigerator? If you buy a new refrigerator, there may be some ** in the process of transportation, and then there will be a reason for the heat to be like this, and after he rests for two hours, this phenomenon should not occur after work.

The two sides of the newly bought refrigerator are hot because the motor of the refrigerator is placed on both sides of the refrigerator, and it is normal for the heat generated when the motor is running to cause it to be hot.

Two trips to the refrigerator, what's the matter with the heat on both sides? Well, because your refrigerator um, give him a little bit is to plug it in after um, he started to work um, the heat on both sides is his motor, on both sides of the heat dissipation, is heat dissipation well, so when it is started again, he is hot, hehe, alas, this is the engine, in the heat dissipation.

Because the operation of the refrigerator after the power is turned on, the two sides of the box are heated, which is a normal phenomenon.

It is normal for the sides of the refrigerator to heat up.

The refrigerator is refrigerated by the compressor, which is refrigerated by the circulation, and when the refrigerator compressor is working for refrigeration, the freon circulates and takes the heat away from the radiator. In the past, the radiator of the old refrigerator was exposed, and it could be seen, that is, there were rows of black tubes at the back of the refrigerator, and now the refrigerator is beautiful, and the heat dissipation air is built-in, and you can't see it, but you can still feel it when dissipating heat, so the outside of the refrigerator is hot.

It is the most common physical phenomenon that any substance has to release heat after liquefaction and absorb heat when it is vaporized. Air conditioners and refrigerators take advantage of this principle to liquefy the refrigerant and release the heat, and then let it evaporate and absorb the heat. The location where the heat is released by liquefaction and the location where the heat absorbed by evaporation cannot be in the same place, otherwise there is no effect.

For refrigerators, the radiator is on the outside of the refrigerator. The purpose is to dissipate heat, but you can still feel it when the heat is dissipated, so the outside of the refrigerator is hot (hot).

Normal, indicating that the compressor is working. Now the condenser of the refrigerator is designed to be installed on both sides of the refrigerator, and when the compressor is working, it dissipates heat through the shells on both sides of the refrigerator, so when the compressor is working, it is normal for both sides to heat up, rest assured.

The new refrigerator is normal, and the new air-cooled refrigerator adds water to the water box at the bottom of the back to submerge the water box coil, which can play a good role in cooling, so that the temperature on both sides drops by about 20 degrees to reach an acceptable thirty or forty degrees, except for the direct cooler.

Normally, the heat inside is discharged outward through the condenser, while the condenser of the refrigerator is generally on both sides of the refrigerator, as well as on the door frame.

This is normal, the cooling screen will heat up when the refrigerator is working. Now for aesthetic reasons, all on both sides or behind the refrigerator.

When I bought a refrigerator, I read the instruction manual, and one of them explained this problem, making it clear that this phenomenon is normal, and it is the internal normal work.

The normal radiators of the refrigerator are on both sides.

Any appliance is meant to heat up, and if a person says that his refrigerator doesn't heat up, that's not normal. There is no one who does not have a fever.

It should be normal.

Under normal circumstances, the refrigerator uses the principle of gas evaporation for refrigeration, and the refrigeration part of the refrigerator is called the evaporator, and the temperature of this mechanism is very low; The other part is called the condenser, which has a higher temperature. The condenser of most refrigerators is installed on both sides of the refrigerator, and its function is to cool down the hot gas, so it will emit a lot of heat. The temperature of the condenser is lower in winter, while the temperature of the condenser will be higher in the summer, and it will even be a little hot.

Therefore, it is normal for the sides of the refrigerator to heat up properly. Don't be surprised. Hope it helps1

Dear, this is normal. 1.Today's refrigerators are generally routinely dissipated on both sides, and it is normal for both sides to heat up.

Because of the operation of the insurance work, the release of food heat, the heat emitted by the evaporator coil, etc., if it is an old-fashioned refrigerator, the condenser will not heat up on both sides. 2.It is also possible that the refrigerator refrigerator is heating up, the compressor can start, remove the return pipe and block the outlet with your fingers, check how much the downward pressure is, if it is too low, then there is a problem with the compressor The compressor can not start, check whether the refrigerator power supply is plugged in.

3.The difference between the ambient temperature inside and outside the refrigerator is too large, resulting in excessive heating on the side of the refrigerator. If the outside temperature of the refrigerator is 30 degrees Celsius and the temperature inside the refrigerator is set to minus 7 degrees Celsius, then there is a considerable temperature difference between them.

It is generally recommended that users set the refrigerator temperature at 2 7 degrees Celsius in the summer and 0 degrees Celsius in the winter.

This situation is normal and there is no need to panic. Under normal circumstances, the position of the radiators of the refrigerator is on both sides of the refrigerator, so once the refrigerator starts to work, the radiators on both sides will also start to work, so it is normal for the refrigerator to heat up.

Notes:

When the new refrigerator is used for the first time, the temperature cannot be adjusted too low, and the second is that too much food cannot be put in, which will cause the Zhengzhou compressor to overload and not stop; Third, the refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator.

It is recommended that you put a thermometer or thermometer in the refrigerator to actually measure, under normal circumstances, the temperature of the freezer should be about minus 18 degrees, the refrigerator is between 1-12 degrees, and it is best to be between 4-8 degrees.

After the new refrigerator is moved home, it should be left to stand for a few hours before the power test machine, the inside and outside of the refrigerator should be wiped clean, the refrigerator door should be opened for ventilation, and the odor inside should be eliminated before closing the door and powering on the test machine.

It is normal to generate heat, because most of the condensers of the refrigerator are installed in the shells on both sides of the refrigerator, and when the compressor is working, the heat is dissipated through the shells on both sides of the refrigerator, and it will not heat up after the compressor is shut down. In summer, the ambient temperature is very high, so the heating temperature on both sides of the refrigerator is also high. In winter, the temperature on both sides of the refrigerator is also relatively low because the ambient temperature is very low.

Common sense of refrigerator use: 1. After the new refrigerator is purchased, it should be wiped several times with a clean rag to eliminate the leakage, but do not close the door after wiping it clean, open the door to let the odor inside dissipate and then use the electricity, or use an electric fan to blow it inside to speed up the emission of the odor. 2. After the new ice racket is carried back, it should be allowed to stand for 2 hours before powering on the test machine.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency. 4. Before powering on the test, you should read the manual in detail and set the temperature according to the operation method on the manual. The temperature of the freezer should be adjusted to minus 18 degrees Celsius, the refrigerator should be about 5 degrees Celsius, and the temperature of the variable temperature room in the middle should be adjusted reasonably according to the type of food to be stored and the length of storage time.

If there is no food in the freezer that needs to be stored for a long time, the temperature can be appropriately adjusted to about minus 12 degrees to minus 16 degrees, which will save more electricity, especially in summer. The same goes for the refrigerator, which can also be raised to between 8-15 degrees if there are no special food requirements to preserve, which is also more energy-efficient. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter.

In summer, it is the most power-efficient to adjust to 1st gear. 5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food at one time to avoid overload of the compressor. 6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.