Can model LED40F2200NE connect to a wireless router at home? How do I set it up?

Wireless access is just fine.

According to your feedback, Konka LED40F2200NE TV is an IPTV that can be used wirelessly. Here's how:

Wireless connection: 1. Wireless connection needs to be matched: wireless network card (wireless network card needs to be purchased and matched by the user, if the built-in wifi does not need a wireless network card), wireless router, computer, network TV.

2. After the wireless router and the computer can be connected to the network normally, please connect the wireless network card to the TV (no driver, can be installed and used directly).

3. TV menu-Network Settings-Wireless Settings-SSID(Search for router devices)、Encryption type(Same as set on the computer)、IP typeSelect automatic getting,Finally, click Settings。

In addition,The wireless router settings that our TV can recognize are:Adopt WEP encryption method,The settings are as follows:The authentication method is selected as Open, WEP encryption is selected64bit, the key mode is selected ascii, any key can be set, and the password needs to be set 5 digits。

Alternatively, use WPA encryption and set the following parameters: set the password type to TKIP, select PSK EAP to PSK, and set the password to 8 digits. Passwords are recommended to be purely numeric.

Konka enterprise knows that to provide you with high-quality solutions, attentive to answer your questions, hope to be able to get you.

Is the model a computer or a mobile phone?

Dear users:

Hello, sorry for the inconvenience caused by the product! The machine can be connected to the set-top box purchased by itself.

Here are the steps to do it for a wired connection:

1. Wired connections need to match: routers, network cables, computers, and network TVs.

2. First of all, the router and the computer can be connected to the network normally (when wired connection, please set the IP of the computer to automatically obtain; Connect the computer and the router, log in the router's **, generally on the back of the routing noiser, such as: etc., after entering the **information,), connect a network cable to the router at one end, and connect the network interface of the TV at the other end.

3、The TV is cut off and the power is restarted,Enter the TV system settings-network-cable-IP type automatic acquisition-setting-network detection。

Here's how to connect wirelessly:

1. Wireless connection needs to be matched: wireless network card (wireless network card needs to be purchased and matched by the user, if built-in wifi, no wireless network card is required), wireless router, computer, network TV.

2. Set the encryption parameters of the router. It is recommended that you use the WEP encryption method, and set the following settings: open for authentication mode, 64bit for wep encryption, ASCII for key mode, any one key for one, and 5 digits for password.

Or use WPA encryption, set the password type as TKIP, PSK EAP as PSK, and set the password to 8 digits. Passwords are recommended to be purely numeric.

3、Turn on the TV and enter Settings-Network-Wireless Settings-SSID Select the name of your router,There will be a dialog box popping up,Prompt you to fill in the password,Click Settings first after entering,Then click Network Detection。 If the TV prompts that the network has been restored The network is connected, indicating that the TV has been successfully connected to the network.