What should I do if Konka LED32F3700NF can t install the app?

According to your description, the machine networking is successful, the built-in **** is not used, it is due to the national policy requirements (Document No. 181 of the State Administration of Radio, Film and Television), the film and television client is upgraded, and some programs will be adjusted accordingly.

We would like to express our sincere gratitude for your understanding and support;

Konka enterprise knows that to provide you with high-quality solutions, attentive to answer your questions, hope to be able to get you.

1) Press the "Vegetable Collapse Sail Single" button on the remote control of the set-top box to find the "Settings" option;

2) In the settings menu, find [WLAN] and click to enter;

3) Click the [Turn off] button in the upper right corner of the [Wi-Fi settings] page, and click to turn on [Wi-Fi].

4) Click to open, a lot of wireless network names will appear on the [WLAN Settings] setting page, find your wireless network and click to enter;

5) Enter the password of the wireless router, the general wireless password is 8 digits, if you don't know, according to the ** provided behind the wireless router, log in to set up, you can turn on the wireless network, so that the set-top box is connected to the wireless network.

If you need a wireless network connection to your TV, you need to connect an external wireless network card and connect to the wireless signal sent by the wireless router at home.

1. Wireless connection needs to match: wireless network card (it is recommended to use RTL8191SU, RTL3070, RTL8712 as the main chip of the wireless network card, drive-free, plug and play; If the TV has a built-in wifi function, it is no longer necessary to configure a wireless network card), a wireless router, a computer, and an IP TV.

2. After the wireless router and the computer can be connected to the network normally, please connect the wireless network card to the TV;

3. The router adopts WPA encryption mode, and the settings are as follows: the password type is TKIP, the PSK EAP is PSK, and the password needs to be set to 8 digits. (It is recommended to use pure numbers for passwords to be easy to identify).

4. TV: Settings - Network - Wireless Settings - SSID (search for router devices), encryption type (the same as set on the computer), IP type Select the automatic key check, and finally click Settings.

5. If it is a built-in wifi function, settings-network-wireless settings, turn on wifi, select the name of your router, there will be a dialog box to pop up the manuscript socks, prompting you to fill in the password, please use the Konka remote control keyboard and mouse to enter the input. After entering, click on the connection first, and then click on the network detection. If the TV prompts that the network has been restored and the network is connected, it means that the TV has been successfully connected to the Internet!

Dear Konka users:

Hello, sorry for the inconvenience caused by the product! According to your description, Konka LED37F3300E cannot be turned on, please check as follows:

1. The power indicator does not light up and does not turn on.

Please make sure that there is electricity at the socket and whether the power switch of the TV is turned on. For some machines, the boot status indicator is not lit, but the spike limb on the screen does not reflect the Nian family stool, which is a problem inside the machine and needs to be repaired.

2. The power indicator light is on, and it does not turn on.

Please press the standby button on the TV panel, if there is no standby button, it is recommended to press the program " " button to see if it can be turned on, excluding remote control shutdown. The user's remote control may be damaged after the remote control is turned off, so it cannot be powered on with the remote control. Some anxious users want to appear immediately after pressing the remote control, if they don't turn on the phone for a short time, they quickly press the switch button, and put the machine on standby, creating the illusion that they don't turn on.

If you press the panel button and still don't turn on, it may be that there is a problem inside the machine and needs to be repaired.

Dear users:

Here's how to do it with a wireless connection:

1. Wireless connection needs to be matched: wireless network card (wireless network card needs to be purchased and matched by the user, if built-in wifi, no wireless network card is required), wireless router, computer, network TV.

2. Set the encryption parameters of the router. It is recommended that you use the WEP encryption method, and set the following settings: open for authentication mode, 64bit for wep encryption, ASCII for key mode, any one key for one, and 5 digits for password.

Alternatively, use WPA encryption and set the password type to TKIP, PSK EAP to PSK, and set the password to 8 digits. Passwords are recommended to be purely numeric.

3、Turn on the TV and enter Settings-Network-Wireless Settings-SSID Select the name of your router,There will be a dialog box popping up,Prompt you to fill in the password,Click Settings first after entering,Then click Network Detection。 If the TV prompts that the network has been restored The network is connected, indicating that the TV has been successfully connected to the network.

Here are the steps to do it for wired networking:

1. Wired connections need to match: routers, network cables, computers, and network TVs.

2. First of all, the router and the computer can be connected to the network normally (when wired connection, please set the IP of the computer to automatically obtain; Connect the computer and the router, log in the router, generally on the back of the router, such as: etc., after entering the **information,), connect a network cable to the router at one end, and connect the network interface of the TV at the other end.

3、The TV is cut off and the power is restarted,Enter the TV system settings-network-cable-IP type automatic acquisition-setting-network detection。