How to solve the large gap between the floor and the wall?

It's a bit difficult. Since I don't know the specific situation of your family, I can only give you a little advice. There is a caulk on the market (not in powder form, similar to hairspray) that you can add some paint to it to make it similar to the color of the floor.

This caulk is originally milky white, and it will be easy if the floor of your house is white.

1. The best way is to buy a thicker baseboard to cover, 2. Caulk cannot be used indiscriminately; It can be seen from the situation of your home that the situation of your home should be relatively dry, the floor shrinks more, and it is generally normal to leave 1-2cm shrinkage fee, especially in the case of a larger living room, which is reserved for the expansion of the floor in a wet situation.

One, replace it with a new baseboard cover. Second, just like the caulk mentioned upstairs, the caulk of the brand "Mapei Zhuo Neng" is good, and there are many colors.

You can buy a wider baseboard.

PVC. This is also the case in our family.

Make one that is close to the color of the floor. It's going to be beautiful.

1. You can use steel sheets against the wall

The steel sheet against the wall has a curved and elastic shape, which is directly padded between the wooden floor and the wall, and can be covered with a baseboard. The thickness of the baseboard can be customized according to the situation, the floor is not fixed, if there is thermal expansion and contraction, the floor will not move in tandem, and it also has greater elasticity.

2. Fill the level with gypsum powder

Directly adjust the gypsum powder to a similar color to the baseboard and make up for it, and trim it evenly.

Precautions for laying wooden floors

The construction work of the wooden floor should be arranged in the later stage, and the construction should be polished and painted as soon as possible after the construction, so as not to stain the floor or be deformed by moisture, and the moisture-proof measures should be taken when the wooden floor is laid, especially in the more humid occasions, the ground can be coated with moisture-proof paint or use bedding treasure and moisture-proof film, etc.

The keel should be flat and firm, can not be reinforced with cement, can be fixed with bolts or Meigu nails, etc., for the keel of the wood should be selected with strong nail holding force larch or liu'an wood. The spacing of the keel should not be too large, generally below 30cm, the two ends of the floor should fall on the keel, can not be empty, and each keel must be nailed, can not use water-based glue.

When paving the floor, it can not be paved too tightly, the expansion joints should be left around, and can not be laid ultra-wide, if it is transported to a wider occasion, it should be separated and cut off, and the copper strip should be transitioned. Floors and bathrooms and kitchens should be thoroughly isolated from moisture.

Priority is given to caulking paste and glass glue to fill the gaps directly, which can generally be purchased in hardware stores. 3. Pay attention to maintenance: wipe the floor with a towel in winter to maintain humidity, and maintain the floor with solid wax in summer.

Hope it can help you kiss it.

If you feel satisfied, remember to give a thumbs up

The gap between the floor and the wall is large, and the baseboard is used to solve it. 1. The function of the baseboard is not only to solve the large gap between the floor and the wall, but also to reserve a gap of about 5mm at the wall when the floor is laid. This is to prevent the materials from squeezing each other during thermal expansion and contraction, resulting in warping, hollowing, deformation, and so on.

2. The baseboard can reduce the damage of the wall by external forces. At the same time, it also reduces the difficulty of daily maintenance and cleaning of areas that are prone to moisture and dirt. The picture shows the wood wax oil teak baseboard.

3. The baseboard protects the wall and can walk the wire. The baseboard can leave a gap to run the wire. Comprehensively consider the smoothness and beauty of the baseboard and the reasonableness of the wire wiring.

Can't fill things because of thermal expansion and cold contraction. Fill in the floor and it will arch.

The first thing to look at is what kind of floor, to properly reserve expansion joints, so that in the thermal expansion and contraction of the time to ensure that the floor is not squeezed and deformed, the solid wood floor is appropriately larger, followed by multi-layer solid wood, laminate flooring; Second, look at how big the gap between the floor and the wall is, if it is too large, you can consider using a spring, but be sure not to die, the exposed part can be covered with a baseboard.

Typing so many words, I hope it helps you.

When packaging the floor, the moisture content of the floor should not be too high or too low, the moisture content should not be too high, the moisture will volatilize after the floor is packaged, and the gap will become larger on the floor, and the moisture content of the floor will be too low, and the moisture will expand after the packaging is completed. According to the national standard, the moisture content of the wooden floor is 8% 13%, but the natural climate in different regions of our country is different, the south is rainy, the moisture content of the wooden floor is about 14%, and the northern climate is dry, and the moisture content of the wooden floor is about 12%. The renovation workers did not work smoothly, and the gaps in the wooden floors were large.

When the interior decoration is laid on the floor, the gap between the wooden floors is relatively large, and the voids of the wooden floors will be larger in dry weather in the future. In addition, the floor is wet before packaging, and there is a large gap in the drying and shrinkage of the floor after the packaging is completed, and the floor is not painted in time after the packaging is completed, the floor is irradiated by the sun, and the floor moisture shrinks after volatilization, and the void increases.

The indoor air conditioner for a long time, the doors and windows are closed, the air humidity decreases, and the wooden floor dries and shrinks, resulting in large gaps. Do not put wooden floors in a damp place before packing. Before laying the floor, keep the temperature and humidity of the floor wall of the house is normal, first pile up the wooden floor in the room to be laid after unpacking the wooden floor for 2-3 days, so that the wooden floor can adapt to the surrounding air humidity and temperature, and prevent the wooden floor from expanding or shrinking after packaging.

Another point to note is that if the floor packaging time is contributed after construction, the floor cannot be laid before the wall is wiped.

Especially in houses with poor flooring or lighting, moisture-proof films, moisture-proof paints, etc. can be used to prevent moisture from expanding after the floor is packaged. The flooring is packed, but before painting, please avoid exposing the floor to sunlight for a long time, so as not to increase the interval between the drying and shrinkage of the floor. When laying a hardwood floor, the two floors are laid too loosely, which will create a large gap as the hardwood floor shrinks.

Usually when laying, the gap between the two solid wood floors should be less than 1 mm. My friend told me that I could fix it by filling it with a layer of cellophane.

The moisture content of the flooring produced is high, and the moisture content of standard solid wood flooring is 8%-13%. Laying an inferior floor will cause the moisture of the wood to lose, causing the floor to crack, shrinking the floor, and increasing the spacing between the floors. The water used to wash clothes often is used to wipe the floor, and if the alkalinity is too high, the cracks in the floor may become larger.

Sometimes when the air conditioner is turned on at night or global warming, the temperature difference between day and night is too great, causing the floor to get hot and cold, and over time, the gaps in the floor will become larger. If the gap is small, you can buy a humidifier to restore the indoor humidity, and you can also restore the gap in the solid wood floor. If the spacing is too large, you can use wax to repair it, adjust the wax to a color close to the wood board, pour it into the gap, and the wax can also lock in the moisture on the board.

It may be because of the quality of the wooden floor, or it may be because of the thermal expansion and contraction due to the weather of the construction, which can cause large gaps in the floor.

Because the workers did not do it tightly, people often stepped on the floor close to this place to make the gap bigger and bigger.

It may be because the content of cement was relatively small when laying bricks at that time, so it did not play a good role in fixing the bricks.

It is because the moisture content between the floors is too large, so the gap between the floors will become larger, and it may also be caused by the worker's construction is not in place.

It can be treated with a special sewing agent, and the specific operation steps are as follows:

Tools Raw materials.

Sewing agent, masking paper, towel.

1. Clean the gap between the tiles with a towel to keep it dry and tidy;

2. After wiping it clean, stick the masking paper between the gaps to avoid contamination of other areas;

3. Turn the sewing agent upside down and shake it for 20 seconds, so that the sewing agent has good fluidity;

4. Then aim the beauty joint agent at the gap between the tiles, squeeze out the paste with moderate strength, and apply it evenly;

5. After scraping the sewing agent with a scraper, tear off the masking paper;