Why does it take a while for only desktop wallpapers to appear when I turn on the computer before so

First of all, you have too many startup items, you can remove them, and then use Optimizer to clean them up, disk fragments, you can do it. Open the task manager (CTRL+ALT+DELDTE) when you are stuck and create a new one and see that it can come out immediately.,But this is only temporary.,I've also had this situation.,Mine is 360 that appears after installation.,You see if it appears after pressing something.。 That's all I know.

Hope it helps.

The more common reason is that there is too much software launched when you boot up, and the general way to judge is to see whether there are more or fewer software icons in the lower right corner. If you want to know the list of software that starts with boot, you can install 360 Security Guard or Super Rabbit or Windows Optimizer.

I'm using a super bunny, in"Build your own system"Look inside"Start the program".Generally, the items that need to be retained for boot startup are: input method, antivirus software. Whether or not to keep the rest of the software is a matter of personal preference.

Lots of possible classes.

For example, your memory is too small or too old. The CPU is not fast enough. There are too many startups or something.

Press win+r to start and open it, enter msconfig and put it in, there is a startup selection card inside, turn off all the things you don't need. Especially the card bar thing.

Anything else. Try to clean up the trash with the optimizer or something.

No, ask again.

There are too many startup items in the system!!

Start--Run--Input msconfig--Leave only ctfmon (input method startup item) in the startup item。

There are too many files on the computer startup.

Too many junk files.

It's good to optimize the system.

Use Windows Optimizer to optimize the boot speed, if it doesn't work, check the poison again, and then stop the software or process that is not necessary to start when booting.

In the process of using the computer, the wallpaper will appear when the screen is not moved, because the computer automatically locks the screen and is in a state of trimming, so this reason will appear.

This is a normal setting, which can effectively ensure the security and stability of the use of the computer, so about the normal use of the computer, you can learn more from professionals and communicate with others, and pay attention to effective communication methods.

1.Listen intently.

If you're constantly looking at your phone or thinking about something else, you can't listen intently. You need to focus on the momentary experience to capture subtle nuances and important non-verbal cues in the conversation.

If you find it difficult to focus on certain speakers, try repeating their words in your head – this will reinforce their message and help you focus.

2.Pay attention to the timing of communication.

When talking to people, if you can relax your mind, have no worries, and say whatever comes to mind, then the conversation can be quite lively, and the atmosphere will be quite lively.

With the attitude of "it doesn't matter if you don't say it well", it is possible to say interesting and witty words according to your actual level. Therefore, it is not necessary to be intelligent to communicate easily, as long as the communication is pleasant.

3. Start a conversation with yourself as a topic to increase the other person's trust in you.

Everyone is most familiar with nothing more than their own business, so the key to talking to people is to make it natural for them to talk about themselves.

No one has to go to great lengths to find a particular topic, but only to talk about it, and it will be easy to speak, and people will often open their hearts to each other.

4. Master the art of communication.

In the course of the conversation, if you have to criticize the other person, be sure to bring it up tactfully. Ming's criticism has the following characteristics:

Don't criticize in front of others.

Criticism should be preceded by words of affection and appreciation, and then the criticism should be introduced with a twist such as "but", i.e., in a euphemistic way.

Criticize the other person's behavior rather than the person's personality. Criticize others in a consultative tone rather than a commanding tone.

It's a matter of facts.

The computer boots up and only shows the background**, which mainly exists in two aspects.

One: The icon is hidden.

Solution: Right-click in the blank space of the desktop, select "Arrange icons" in the face key menu - >Show desktop icons", and the icons will be displayed.

Two: Explorer didn't start.

Method 1: There are many such problems, just restart the computer, if it still doesn't work, press Ctrl + Alt + Del keys at the same time to bring up the task manager, and then "File" -> New Task" - > enter explorer -> OK, the above is only a temporary solution, if you want to solve it for a long time, go to the C: Windows folder, find the explorer and right-click, create a new shortcut, and then move this shortcut to "start" in the "Start" menu".

Method 2: If the above methods do not work, it may be that the explorer file is damaged or lost, you can go to the same version of the system, copy a file with a USB flash drive, and then start the computer with a USB flash drive, and after entering, put this explorer into the C: Windows folder.

It's okay to ask questions.

None of these options can be carried out.

Question: Tried No.

Answer: Click Start Run, enter "regedit" in the "Run" dialog box that opens, press "OK" or enter, open the registry, locate to hkey local machine software Microsoft Windows NT CurrentVersion Winlogon, and then check whether the shell value under the branch is ". If not, manually modify it to ". If it is caused by general file corruption that the desktop does not display icons properly when startup, this can be solved.

If you have a Trojan or virus, this method may not work, you can pull out the desktop in safe mode, and then disinfect or reinstall the system.

Confirm by pressing Ctrl+Alt+Del to exit the Task Manager, and enter New Task in the File menu.

Or use the method below.

User information is broken.

Reboot, then press F8 when booting up, select "Safe Mode with Command Prompt", then select "Administrator", and after entering, directly type: net

useraaa123

addNote: aaa is your new username, 123 is the password of your new username), and when you finish running, enter :net in the cursor

localgroup

administrators

aaa add (Note: This command promotes the AAA user you just added to administrator. net

localgroup

administrator

aaa add) is finished, restart the computer, and you can log in with the username aaa.

If that doesn't work, you can copy one from another computer to your own computer under C: Windwos.

Press Ctrl+Alt+Del to open the Task Manager, then run Explorer and you're good to go! It's best to restore the system!

Try this!

Keypad that. Tap to bring up the task manager.

Create a new task (n).

Enter 2If the above methods don't work, try this.

Proceed to bring up the Task Manager.

Create a task. Enter cmd

A command prompt pops up.

window.

cd enter.

Then enter start enter.

Wait, slow startup. Or if the taskbar was deleted by you by mistake during antivirus, then the only way to do this is to reinstall the system!

Blue screen at boot.

English: That's supposed to be you.

Illegal shutdown, and the self-test, do not skip, after the self-test is completed, it should not appear next time.

No desktop icons.

You can ctrl+alt+del

Application--New Task--Browse--My Computer--C drive will display the desktop, if not, you can also use the method just now to run the antivirus software for antivirus.

If it really doesn't work, restore or redo the system, it will be effective, and it will be completely !!

There is a problem with the system. Drive into F8 to enter safe mode.

If you can get in. Disconnected.

Antivirus after entering. Give it a try.

When you encounter a situation where there is no icon on the desktop, it is caused by a variety of reasons, and you can follow the following methods to troubleshoot.

1. First, right-click on the desktop to select the arrangement icon and check the display desktop icon.

2. If the fault persists, open the task manager (press the "Ctrl+Alt+del" key combination to open), click "File" and "New Task", enter "Explorer" in the "Create New Task" dialog box that opens, click the "OK" button, and wait a while to see the desktop icon.

3. If the fault persists, press the windows key + r to open the running window, run and enter regedit to open the registry, and locate [hkey local machine software microsoft windows

nt currentversion winlogon] and see if the shell value on the right is ". If not, manually modify it to ". Double-click the shell, enter the numerical data in the open dialog box and press OK, and restart the computer.

4. If the fault persists, the "process file" in your C: Windows directory may be damaged, copy the "process file" in the C: Windows directory on another computer with a U disk, and press F8 to enter the safe mode at boot, and put it in your C:

windows directory.

In general, the above method can solve the problem of no icon on the desktop. If it is caused by virus destruction, this method will not work. It can be solved by following the methods below:

1. Use anti-virus software and malware killing tool Windows Cleanup Assistant to detect and kill viruses and Trojans in safe mode.

2. If the fault persists, use the system's built-in system restore to repair it (use system restore in safe mode).

3. If the fault is not eliminated, use the system disk to repair, press the windows key + R to open the running window, run and enter cmd enter, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare and repair.

4. If the fault persists, the only way to do this is to reinstall the operating system.

Hope it helps. Hope! Thank you.

The desktop program can't be started, is it because you are prohibiting the desktop program from starting automatically in the boot optimization?

Could it be that the desktop icon is hidden?

Right-click on the desktop and select "Arrange icons" - show the desktop icons.

Only the mouse pointer is displayed when the system is turned on, which is an operating system problem.

The reason for this is that the program responsible for displaying the desktop does not start properly for some reason.

You can try to press the key combination Ctrl+Alt+Del to manually bring up the task manager, create a new task and run the program, and the desktop can be displayed.

If you can't bring up Task Manager, or if you want to solve the problem completely, it is recommended to reinstall the system.

In such a situation, it is generally a problem with the system, and it is enough to reinstall the system!

First. 360 antivirus software detects and kills virus Trojans.

Second. Clean up the desktop icons, too many desktop icons will also cause the computer to start up with too long a scan time.

Turn off unnecessary boot start! Clean up the next malignant plugins.

and system garbage! Reboot it out! It's going to be a lot faster.

Clean up system junk.

Wait a minute! Fourth.

Click. Start-

Run. Enter msconfig-OK.

Cancel all the startup --- except for 360 Antivirus, and restart the computer.

And secondly, it is. Start --Settings --Network Connection --Local Connection --Local Connection Properties -Interner Protocol.

Attribute - Use the IP address below.

IP address. Fill it in? (Question mark can be filled in at will, 2--9 digits) -- subnet network code to fill in.

Default gateway. Fill out. Click OK and restart the computer and you're done.

1) The disk may be damaged due to illegal shutdown or other reasons, please repair it (repair each disk once or only repair C).

Built-in disk repair method:

The specific steps are as follows: Select drive letter C in My Computer

After right-clicking the mouse, select the properties, in the pop-up drive properties window, select "Tools Start Checking" and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair after the automatic shutdown is done at boot, win7 select the disk check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

2) In addition, it may be that something inappropriate is installed.

Immediately after booting, press f8 to the advanced option to appear in the let go, select the "latest correct configuration" enter to repair, not yet press f8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a card, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, and uninstall all the inappropriate things before the accident, or restore the system or reinstall).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.