How to flash Apple ipan2 air

iOS devices can be upgraded by flashing into the system through third-party assistant software such as iTunes or AIS-Assistant, and the following is an example of upgrading the iPhone system with the help of AIS-Assistant:

The first step is to install "Aisi Assistant" on the computer**, open Aisi Assistant will prompt you to install iTunes, install according to the prompts, connect your iPhone to the computer after the installation is completed, and Aisi Assistant will display the machine information after the connection is successful;

Step 5, click "Flash Now", enter DFU mode according to the pop-up instructions, and then wait for the flashing to complete.

ipad air 2？On the computer**good which version of your ipad is, recommend the official website**), link the computer, open iTunes, let the ipad enter recovery mode, and then choose your **good firmware to flash, flat brushing is very simple.

iPad Air Upgrade Recovery Ready:

Note: Restoring the firmware via iTunes will erase all data on your iOS device, click here to backup iPad Air.

Jailbreak iPad Air has made the iTunes upgrade with the answer stool The recovery may report an unknown error, please rest assured, the iPad Air will automatically enter recovery mode if the recovery fails, please connect iTunes and restore the firmware again.

iPad Air Upgrade Restore Preparation Detailed Steps:

<>2.Connect your iPad Air to your computer and open iTunes.

3.Hold down Shift (Alt key on Mac) + Left Mouse Button on your keyboard to check iTunes for updates.

<>5.Wait patiently for the firmware to be successfully updated, and the device needs to be activated before it can be used normally! (Please be prompted to complete the steps). Round-robin.

Official version.

Designed by a team led by British-born design executive Jonathan Ive, the Apple iPad reflects Yves' reverence for the talented German designer Dieter Rams.

Basic Information. In 2000, the "iPad" (Internet Portable Apple Device) was already an extremely important project within Apple, starting as a secret project based on multi-touch and has been carefully protected by Steve Jobs. After mastering the multi-touch technology.

In 2002, Apple's hardware development department had the first iPad prototype, but this machine was relatively heavy and the battery performance was too weak. So Apple continues to improve touch technology, while the tablet plan is postponed indefinitely.

At the beginning of 2008, NetBook appeared and began to eat into the share of traditional laptops, all of which were being made by companies except Apple and Sony, which launched its own Netbook in 2009: VAIOP.

Netbook is nothing," Steve Jobs once asserted in public, "it's just a very cheap notebook, and you can't find a little bit of excellence in it." At a high-level meeting in 2008, it was decided to continue the development of the iPad prototype that had been sealed in the Jenny ive lab as a counter-attack to the Netbook.

The specific operation of iPad flashing is as follows:Operating environment: iPad Air, system, RedmiBook Pro 15 computer, Windows 10 system, etc.

1. Shut down the iPad that needs to be flashed.

2. Connect the data cable to the computer.

3. Press and hold the home button and connect the data cable at the same time.

4. Wait for the data cable and iTunes icon to appear on the iPhone.

5. iTunes will prompt a pop-up prompt, select "Recover".

Since the network supported by the mobile phone is determined by the hardware, it is not possible to crack the software or upgrade the software system to make the mobile phone support the network of other operators.

Answer: I'm glad to answer your questions: 1. If your iPad Air is not jailbroken, you can directly erase all content and settings in Settings - General - Reset to factory reset. Restore the system in this way, and after the restoration is complete, the system version remains the same;

2. If the iPad Air is jailbroken, it can only be connected to the iTunes flash on the computer.

1. Connect your iPad to iTunes and back up your data.

2. Let the iPad enter DFU mode: When the iPad is powered on (no need to enter the desktop), first press and hold the Home button, then press and hold the Power on button until about 4 seconds after the screen goes out, release the Power on button, but continue to press and hold the Home button for 15 seconds, and the device will enter DFU mode with a completely black screen.

3. After the iPad enters DFU mode, iTunes will prompt the device to be in recovery mode, click OK, and then tap Restore iPad;

5. After the recovery is completed, the system is upgraded to the latest version and is not jailbroken, and needs to be reactivated to use it;

3. Of course, the device that has not been jailbroken can also take method 2 to flash the machine, the steps are the same, and the result is the same.

Hope it helps you and have a great day!

You can connect iTunes on your computer to update.

The operation of iPad Air flashing is as follows:

Step 2: Connect your iPad Air to your computer with a cable.

Step 3: Press and hold the power button on the top of your iPad Air, and then slide to power off when the power off interface appears.

Step 4: Then please press and hold the power button to turn on, then the Apple logo will appear on the screen, do not release the power button.

Step 5: Then press and hold the home button on the home screen until the screen goes black.

Step 6: When the screen is black, release the power button and the home button on the home screen until iTunes on the computer detects an iPad in recovery mode

Step 7: Press and hold the "Shift" key on your keyboard, click "Recover", and select the corresponding firmware to restore the system.