Hard drive data loss is sought to recover 100 out of 100

Updated on technology 2024-05-04
14 answers
  1. Anonymous users2024-02-08

    I don't know if you've seen [Jailbreak], but the destruction in the hard drive can still be restored.

    Today's technology certainly allows for the recovery of all files. However, if you simply use EasyRecovery or something like that, you will be disappointed.

  2. Anonymous users2024-02-07

    It can only be said that it is a try, some data recovery software is not all lost things can be found, the most commonly used and free and the best to introduce you to two.

    Try this first.

    Chinese version and then try this drive rescue

  3. Anonymous users2024-02-06

    I can't find it.,There's no software that can bring it back to life.,If it's important to talk to the leader quickly.,Just say that the computer is broken.,Cause the data to be gone.,If it's not very important, it doesn't matter.,In the future, it is recommended that you don't put anything on the desktop c disk.,Especially important.,I've experienced this pain several times.。 The following is optimistic, it is the data loss caused by the restoration of the original system, not the data of the hard disk deleted by mistake or accidentally lost, and it cannot be recovered, because the data has already been formatted when it was restored. It's impossible to get it back, so it's better to find a way to solve the real problem.

  4. Anonymous users2024-02-05

    You may not be able to find it because if you use recovery software, provided that you deleted something after not installing, using, storing information on your computer. As long as a little bit is saved, you may have a large amount of data rewritten to the same location on the hard drive. Not to mention that you used ghost to make a C drive, which is equivalent to deleting all the C drives and rewriting them all over.

    It is impossible to have complete data, let alone recovery.

    I can only say that you should be careful next time.

  5. Anonymous users2024-02-04

    Hurry up and grab your hard drive and go to a data recovery company if it's really important

  6. Anonymous users2024-02-03

    1. You can use the file repair tool of PC Manager to repair.

    2. First of all, open the PC Manager toolbox.

    3. Find the "File Recovery" tool.

    4. Click "Recover Deleted Files" and select Memory Card Recovery.

    5. Wait for the scan to end, then you can find the deleted files, and select Recover.

  7. Anonymous users2024-02-02

    Software-level data recovery usually uses special software to read the underlying data directly through the file system to obtain some data that is not normally seen in the operating system.

    Generally speaking, most file system deletions achieve a similar effect by changing the records in the file allocation table, where the data is still present and can theoretically be recovered until it is overwritten.

    Of course, some data that has been specially encrypted or deleted with confidentiality is not included. There are also some software that can automatically analyze the underlying data that is read, such as file header information, file characteristics, etc., so as to provide greater convenience for recovering files.

    Hardware-level data recovery is usually done when the hard drive is severely damaged or unusable.

    If the drive circuit of the hard disk is damaged to a certain extent, it can usually be solved by replacing it; However, if there is a problem with the platter itself or the head, it is generally necessary to open the disk to retrieve the data.

    These operations require the help of professional institutions, which is not possible for ordinary users.

  8. Anonymous users2024-02-01

    First, since the hard drive is smoking, it means that the chips on the circuit board are burned out and the hard drive cannot boot. Either the repair shop replaces the chip or hard disk circuit board, and replaces the 500g hard drive with the circuit board of the same model Seagate 500G hard drive.

    Second, after the hard disk can be recognized, you can no longer delete and store things on the 500g hard disk, otherwise your original data will be overwritten. Scan the hard drive with a repair tool such as finaldata or recover, and then copy the scanned files to an 80g hard drive. Many ghost discs come with their own data recovery tools, use the ghost disc to enter the PE system and use data recovery software to scan the hard disk, and then copy the scanned files to another hard disk.

    Data recovery can take several hours or even a whole day, depending on whether you want to recover a partition of the hard drive or an entire 500g disk.

    If you can't recover it, you have to take it to the data repair center for dust-free laboratory dismantling the hard drive, put the platter in the hard disk into other hard disks to read the data, probably you get back 1g of data from the recovered data It will cost more than 100 pieces, which is equivalent to you buying data from them, so you can only pick the most important data, and discard the rest.

    Third, 80G hard disk, if there is a lot of remaining space on the disk where the ** is stored, then it is very likely that the data has not been covered, but as long as the entire partition is filled once, then those** is very likely to be covered, which means that the same as the chalk words on the blackboard, the original area on the hard disk is occupied by other files, and the data is erased and rewritten into the data of other files.

  9. Anonymous users2024-01-31

    The first condition for recovery is not to write after a misoperation. Your hard drive has already been written, so there's little hope of recovery.

    The 500g Seagate refresh has smoked, and there must be a power component that has burned out and can no longer run, and generally cannot recover the data. Unless you try your luck in the hard drive factory, the specifics are not clear, but it is certainly expensive. In addition, because there is already a bad sector, if the disk surface or the head is injured, maybe the entire disk has also been damaged, and there is no way to recover the data.

    If the 80G Samsung hard drive is only formatted in a certain area and no other files have been written, there is hope for salvation. But if you've already deposited a file into it, it's irreversible. Of course, if the stored file is too small to cover the whole file, there is still the possibility of partial recovery.

    When you find that the hard drive has bad sectors in the future, you should first back up the data and don't rush to format it. In addition, now hard disks are getting cheaper and cheaper, but the quality is not as reliable as before, and the life span is not as long as it used to be. Usually, you can't press the treasure on a hard disk, and you have to back it up in time.

  10. Anonymous users2024-01-30

    As long as there is a need. Yes, it can be recovered. It depends on whether you have enough money. It is said that the national security system can unconditionally restore disks that completely overwrite data 10 times.

  11. Anonymous users2024-01-29

    Yes, you can use WinHEX. You can find posts on the Internet to try it, and it's best to go to a computer company to fix it.

  12. Anonymous users2024-01-28

    After the partition is lost, do not write new data at will, and the data can be restored completely. In order to avoid the wrong operation destroying the data again, you can first read the article in my space. If you still need assistance, feel free to hi me or q me.

  13. Anonymous users2024-01-27

    Your data loss is part of partition deleted data recovery, which you can recover with EasyRecovery Professional. The specific steps are as follows:

    1.Open the main program of EasyRecovery and click on the Data Recovery button;

    2.Click on the Advanced Recovery button again, and you can see a space that does not recognize the partition format, and the size is the same as the partition to be recovered;

    3.Select this space, click the Advanced Options button, select the File System Scan option page in the pop-up window, and then select the FAT32 partition format in the File System, there are also four formats in this option: FAT12, FAT16, NTFS, and RAW, when scanning different partition formats, select the corresponding partition format;

    4.Click the OK button, the program scans in this space, it will find the deleted partition, and ask if this partition is the partition we need to find, if so, click the OK button;

    5.The partition that needs to be recovered is already displayed in the partition list, then select the partition you need, click the next button, the program starts to scan the files in the partition, and when it is over, we see all the files we need to recover.

    Here is a special reminder that the most correct way is to find another computer, and then connect the hard disk that needs to be recovered to the slave disk, and then scan the slave disk through the easyrecovery installed on the main disk, in short, the hard disk that needs to be recovered can not do any read and write operations, especially write operations, so that once the recovery fails, it will not cause secondary damage, and you can also turn to 51recovery.

  14. Anonymous users2024-01-26

    The data loss in the hard disk is not impossible to recover, it is recommended to use professional data recovery software to recover, easyrecovery is a good software, the specific operation steps are as follows:

    Step 1: Open EasyRecovery software. Double-click on the software shortcut icon on your desktop and the startup window of the software will pop up to open EasyRecovery 12 data recovery software.

    Step 2: Select the content to be recovered. The main interface of the software opened is shown in the figure below, and you can enter the interface of selecting the content to be recovered, where you can choose to recover all data, or you can choose to recover documents, emails, ** or audio separately.

    Figure 1: EasyRecovery 12 main interface.

    Figure 2: Select the location where the file is located.

    Step 4: Find Files & Folders. After clicking the "Scan" button, you can start scanning the disk where the files are located, here it is divided into 3 stages, and when all are done, you can display the lost files.

    Figure 3: Find Files and Folders.

    Step Five: Recover Lost Files. When the scan is completed, you can see that the deleted files are all found, select the files you want to recover, click the recover button in the bottom right corner, select the file storage location (do not save it in the original location) and the files can be recovered.

    Figure 4: Recovered Files.

    Follow the steps above, you can recover the deleted files, with the help of EasyRecovery, whether it is the deleted files can be recovered, you can try.

Related questions
3 answers2024-05-04

Do not deposit new files into it to avoid overwriting the files you want to recover. Recovery can be done using software and the steps are as follows: >>>More

4 answers2024-05-04

The installation of Inal Data is simple, after running the software select the logical drive where the data files you want to recover are located. If you are recovering data from the entire hard drive, you can directly select "Physical Drive". After determining the target task, Final Data automatically searches and analyzes which directories and files are normal and which files have been deleted. >>>More

4 answers2024-05-04

We know that there is no ** station for mobile hard disks, that is to say, deleted things are like a complete deletion of the computer, it is impossible to find them in any unknown from the computer, and if you want to recover the lost data deleted by mistake, we can only use data recovery software to retrieve it. >>>More

6 answers2024-05-04

Give it a try with EasyRecovery Professional. It is in Chinese, and it is very simple to retrieve deleted files.

4 answers2024-05-04

First of all, don't format it, try to use data recovery software like finaldata for data recovery. >>>More